08/01/08 12:48
Trace from DisplayNumberOfEntries: the search expression was
Numerical table example using DisplayNumberOfEntries
Numerical table example using DisplayNumberOfEntries
Numerical table example using DisplayNumberOfEntries
Numerical table example using DisplayNumberOfEntries
Numerical table example using DisplayNumberOfEntries
Numerical table example using DisplayEntryEvaluation
Numerical table example using DisplayEntryEvaluation
Numerical table example using DisplayEntryEvaluation
Numerical table example using DisplayEntryEvaluation
Numerical table example using DisplayEntryEvaluation
Numerical table example using DisplayEntryEvaluation
Numerical table example using DisplayEntryEvaluation
Numerical table example using DisplayEntryEvaluation
Numerical table example using DisplayEntryEvaluation
Numerical table example using DisplayEntryEvaluation
Numerical table example using DisplayEntryEvaluation
Numerical table example using DisplayEntryEvaluation
Numerical table example using DisplayEntryEvaluation
Numerical table example using DisplayEntryEvaluation
Numerical table example using DisplayEntryEvaluation
Tabela de fatores de impacto por coordenadorias
Os valores possíveis de fatores de impacto se estendem de 0 a 7.
Tabela de fatores de impacto por coordenadorias
Os valores possíveis de fatores de impacto se estendem de 0 a 7.
Tabela dos indicadores FQ,IAD, IAL e IPW por coordenadorias e para o INPE
1. Fator de qualidade (FQ)
O FQ pode assumir valores de 0 a 7, ele é independente da quantidade produzida,
quando maior é o FQ maior é a qualidade produzida. O FQ é definido por:
FQ = (1 / n) ∑ i = 1, ..., n qualis(i),
onde:
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path"
23/03/08 15:48
All the 5 searches have been made.
23/03/08 15:53
CreateTclPage (first substitution):
can't read "useStoredValue": no such variable
while executing
"DisplayNumberOfEntries "y 200* and [set s1 {ti tt or au story}]" no no $useStoredValue"
invoked from within
"set x1 [DisplayNumberOfEntries "y 200* and [set s1 {ti tt or au story}]" no no $useStoredValue]"
invoked from within
"subst {
PI
PN
PI + PN
PI v PN
~(PI v PN)
Total
[set x1 [DisplayNumberOfEntries "y 200* and [set s1 {ti tt or au story}]" no no $useStoredValue]]
[set x2 [DisplayNumberOfEntries "y 200* and [set s2 {secondaryd 19920101|20021231}]" no no $useStoredValue]]
[if {![string equal {} $x1] && ![string equal {} $x2]} {
expr [ExtractNumber $x1] + [ExtractNumber $x2]
} else {
set xxx { }
}]
[DisplayNumberOfEntries "y 200* and ($s1 or $s2)" no no $useStoredValue]
[DisplayNumberOfEntries "y 200* and not ($s1 or $s2)" no no $useStoredValue]
[DisplayNumberOfEntries "y 200*" no no $useStoredValue]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path"
23/03/08 15:55
All the 5 searches have been made.
11/06/08 19:11
DisplayNumber: all the 5 searches have been made.
12/06/08 20:48
Trace from DisplayNumber: the search expression was
PI
PN
PI + PN
PI v PN
~(PI v PN)
Total
[set x1 [DisplayNumberOfEntries "y 200* and [set s1 {ti tt or au story}]" no no $useStoredValue]]
[set x2 [DisplayNumberOfEntries "y 200* and [set s2 {secondaryd 19920101|20021231}]" no no $useStoredValue]]
[if {![string equal {} $x1] && ![string equal {} $x2]} {
expr [ExtractNumber $x1] + [ExtractNumber $x2]
} else {
set xxx { }
}]
[DisplayNumberOfEntries "y 200* and ($s1 or $s2)" no no $useStoredValue]
[DisplayNumberOfEntries "y 200* and not ($s1 or $s2)" no no $useStoredValue]
[DisplayNumberOfEntries "y 200*" no no $useStoredValue]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
27/06/10 21:51
CreateTclPage (first substitution):
missing operand at _@_
in expression "6 + _@_"
(parsing expression "6 + ")
invoked from within
"expr [ExtractNumber $x1] + [ExtractNumber $x2]"
invoked from within
"if {![string equal {} $x1] && ![string equal {} $x2]} {
expr [ExtractNumber $x1] + [ExtractNumber $x2]
} else {
set xxx { }
}"
invoked from within
"subst {
PI
PN
PI + PN
PI v PN
~(PI v PN)
Total
[set x1 [DisplayNumberOfEntries "y 200* and [set s1 {ti tt or au story}]" no no]]
[set x2 [DisplayNumberOfEntries "y 200* and [set s2 {secondaryd 19920101|20021231}]" no no]]
[if {![string equal {} $x1] && ![string equal {} $x2]} {
expr [ExtractNumber $x1] + [ExtractNumber $x2]
} else {
set xxx { }
}]
[DisplayNumberOfEntries "y 200* and ($s1 or $s2)" no no]
[DisplayNumberOfEntries "y 200* and not ($s1 or $s2)" no no]
[DisplayNumberOfEntries "y 200*" no no]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
10/07/10 21:38
CreateTclPage (first substitution):
can not find channel named "stdout"
while executing
"puts --$searchResultList--"
invoked from within
"if [string equal yes $cgi(fusion)] {
# Make fusion of repeated entries
# >>> puts $searchResultList ;# may return an error message
set searchResultL..."
invoked from within
"if [regexp "^\{<(.*)>\}$" $searchResultList m errorMessage] {
# the search expression has a syntax error
if $header {
if [info exists cgi(query)] {..."
(procedure "CreateOutput" line 170)
invoked from within
"CreateOutput $language $languageRep1 $languageRep2 $query {} Search {} [list $function1 {} {}] 2 brief 1 {^$} 0 {} 1 {#EEEEEE #E3E3E3} $siteList"
invoked from within
"if [info exists searchResultArray($itemName)] {
# Load $dirName/searchResult/$fileName output
set output $searchResultArray($itemName)
# set log "..."
(procedure "DisplayNumber" line 27)
invoked from within
"DisplayNumber $searchExpression2 $accent $case $subsetOfGroups $integerWithLink DisplayNumberOfEntries"
(procedure "DisplayNumberOfEntries" line 3)
invoked from within
"DisplayNumberOfEntries "y 200* and firstg DSR and [set s1 {ti tt or au story}]" no no 1 {AMZ DGI DPI DSR OBT}"
invoked from within
"set x1 [DisplayNumberOfEntries "y 200* and firstg DSR and [set s1 {ti tt or au story}]" no no 1 {AMZ DGI DPI DSR OBT}]"
invoked from within
"subst {
PI
PN
PI + PN
PI v PN
~(PI v PN)
Total
[set x1 [DisplayNumberOfEntries "y 200* and [set s1 {ti tt or au story}]" no no]]
[set x2 [DisplayNumberOfEntries "y 200* and [set s2 {secondaryd 19920101|20021231}]" no no]]
[if {![string equal {} $x1] && ![string equal {} $x2]} {
expr [ExtractNumber $x1] + [ExtractNumber $x2]
} else {
set xxx { }
}]
[DisplayNumberOfEntries "y 200* and ($s1 or $s2)" no no]
[DisplayNumberOfEntries "y 200* and not ($s1 or $s2)" no no]
[DisplayNumberOfEntries "y 200*" no no]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
CreateTclPage: not all the queries have been satisfied
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
CreateTclPage: not all the queries have been satisfied
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
CreateTclPage: not all the queries have been satisfied
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
CreateTclPage: not all the queries have been satisfied
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
12/07/10 23:13
CreateTclPage (first substitution):
wrong # args: should be "set varName ?newValue?"
while executing
"set entryEvaluationFunctions #!#list $function1 $function1 $operation#@#"
invoked from within
"subst {
PI
PN
PI + PN
PI v PN
~(PI v PN)
Total
[set x1 [DisplayNumberOfEntries "y 200* and firstg DSR and [set s1 {ti tt or au story}]" no no 1 {AMZ DGI DPI DSR OBT}]]
[set x2 [DisplayNumberOfEntries "y 200* and [set s2 {secondaryd 19920101|20021231}]" no no]]
[if {![string equal {} $x1] && ![string equal {} $x2]} {
expr [ExtractNumber $x1] + [ExtractNumber $x2]
} else {
set xxx { }
}]
[DisplayNumberOfEntries "y 200* and ($s1 or $s2)" no no]
[DisplayNumberOfEntries "y 200* and not ($s1 or $s2)" no no]
[DisplayNumberOfEntries "y 200*" no no]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
12/07/10 23:14
CreateTclPage (first substitution):
can't read "maximumNumberOfEntries": no such variable
while executing
"list list GetMetadataRepositories $currentRep 3 $cgi(query) $cgi(accent) $cgi(case) 1 metadatalastupdate repArray {} pages $maximumNumberOfEntries $..."
invoked from within
"if [info exists searchResultArray($itemName)] {
# Load $dirName/searchResult/$fileName output
set output $searchResultArray($itemName)
# set log "..."
(procedure "DisplayNumber" line 27)
invoked from within
"DisplayNumber $searchExpression2 $accent $case {} 0 DisplayEntryEvaluation $entryEvaluationFunctions"
(procedure "DisplayEntryEvaluation" line 3)
invoked from within
"DisplayEntryEvaluation {secondarym * and site banon} $entryEvaluationFunctions"
invoked from within
"subst {
Impact Factor
[DisplayEntryEvaluation {secondarym * and site banon} $entryEvaluationFunctions]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
13/07/10 12:24
CreateTclPage (first substitution):
wrong # args: should be "set varName ?newValue?"
while executing
"set secondaryMark #!#SetFieldValue $serverAddressWithIP $x secondarymark#@#"
(procedure "QualisFunction" line 3)
invoked from within
"QualisFunction $x"
(lambda term "x {return [QualisFunction $x]}" line 1)
invoked from within
"apply $function1 $item2"
("foreach" body line 3)
invoked from within
"foreach item $searchResultList {
set item2 [lindex $item 3]
set sum1 [expr $sum1 + [apply $function1 $item2]]
set sum2 [expr $sum2 + [apply $..."
invoked from within
"if ![string equal 0 $entryEvaluationFunctions] {
set function1 [lindex $entryEvaluationFunctions 0]
set function2 [lindex $entryEvaluationFunction..."
invoked from within
"if [regexp "^\{<(.*)>\}$" $searchResultList m errorMessage] {
# the search expression has a syntax error
if $header {
if [info exists cgi(query)] {..."
(procedure "CreateOutput" line 170)
invoked from within
"CreateOutput $language $languageRep1 $languageRep2 $query {} Search {} $entryEvaluationFunctions2 [expr $maximumNumberOfEntries - 1] brief 1 {^$} 0 ..."
invoked from within
"if [info exists searchResultArray($itemName)] {
# Load $dirName/searchResult/$fileName output
set output $searchResultArray($itemName)
# set log "..."
(procedure "DisplayNumber" line 27)
invoked from within
"DisplayNumber $searchExpression2 $accent $case {} 0 DisplayEntryEvaluation $entryEvaluationFunctions"
(procedure "DisplayEntryEvaluation" line 3)
invoked from within
"DisplayEntryEvaluation {secondarym * and site banon} $entryEvaluationFunctions"
invoked from within
"subst {
Impact Factor
[DisplayEntryEvaluation {secondarym * and site banon} $entryEvaluationFunctions]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
DisplayNumber: all the 1 searches have been made.
13/07/10 12:31
CreateTclPage (first substitution):
can't read "mark": no such variable
while executing
"return markTable($mark)"
(procedure "QualisFunction" line 18)
invoked from within
"QualisFunction $x"
(lambda term "x {return [QualisFunction $x]}" line 1)
invoked from within
"apply $function1 $item2"
("foreach" body line 3)
invoked from within
"foreach item $searchResultList {
set item2 [lindex $item 3]
set sum1 [expr $sum1 + [apply $function1 $item2]]
set sum2 [expr $sum2 + [apply $..."
invoked from within
"if ![string equal 0 $entryEvaluationFunctions] {
set function1 [lindex $entryEvaluationFunctions 0]
set function2 [lindex $entryEvaluationFunction..."
invoked from within
"if [regexp "^\{<(.*)>\}$" $searchResultList m errorMessage] {
# the search expression has a syntax error
if $header {
if [info exists cgi(query)] {..."
(procedure "CreateOutput" line 170)
invoked from within
"CreateOutput $language $languageRep1 $languageRep2 $query {} Search {} $entryEvaluationFunctions2 [expr $maximumNumberOfEntries - 1] brief 1 {^$} 0 ..."
invoked from within
"if [info exists searchResultArray($itemName)] {
# Load $dirName/searchResult/$fileName output
set output $searchResultArray($itemName)
# set log "..."
(procedure "DisplayNumber" line 27)
invoked from within
"DisplayNumber $searchExpression2 $accent $case {} 0 DisplayEntryEvaluation $entryEvaluationFunctions"
(procedure "DisplayEntryEvaluation" line 3)
invoked from within
"DisplayEntryEvaluation {secondarym * and site banon} $entryEvaluationFunctions"
invoked from within
"subst {
Impact Factor
[DisplayEntryEvaluation {secondarym * and site banon} $entryEvaluationFunctions]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
13/07/10 12:31
CreateTclPage (first substitution):
can't read "mark": no such variable
while executing
"return $markTable($mark)"
(procedure "QualisFunction" line 18)
invoked from within
"QualisFunction $x"
(lambda term "x {return [QualisFunction $x]}" line 1)
invoked from within
"apply $function1 $item2"
("foreach" body line 3)
invoked from within
"foreach item $searchResultList {
set item2 [lindex $item 3]
set sum1 [expr $sum1 + [apply $function1 $item2]]
set sum2 [expr $sum2 + [apply $..."
invoked from within
"if ![string equal 0 $entryEvaluationFunctions] {
set function1 [lindex $entryEvaluationFunctions 0]
set function2 [lindex $entryEvaluationFunction..."
invoked from within
"if [regexp "^\{<(.*)>\}$" $searchResultList m errorMessage] {
# the search expression has a syntax error
if $header {
if [info exists cgi(query)] {..."
(procedure "CreateOutput" line 170)
invoked from within
"CreateOutput $language $languageRep1 $languageRep2 $query {} Search {} $entryEvaluationFunctions2 [expr $maximumNumberOfEntries - 1] brief 1 {^$} 0 ..."
invoked from within
"if [info exists searchResultArray($itemName)] {
# Load $dirName/searchResult/$fileName output
set output $searchResultArray($itemName)
# set log "..."
(procedure "DisplayNumber" line 27)
invoked from within
"DisplayNumber $searchExpression2 $accent $case {} 0 DisplayEntryEvaluation $entryEvaluationFunctions"
(procedure "DisplayEntryEvaluation" line 3)
invoked from within
"DisplayEntryEvaluation {secondarym * and site banon} $entryEvaluationFunctions"
invoked from within
"subst {
Impact Factor
[DisplayEntryEvaluation {secondarym * and site banon} $entryEvaluationFunctions]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
13/07/10 12:56
CreateTclPage (first substitution):
invalid bareword "B2"
in expression "0 > B2";
should be "$B2" or "{B2}" or "B2(...)" or ...
(parsing expression "0 > B2")
invoked from within
"expr $x > $y"
(procedure "Max" line 2)
invoked from within
"Max $max $mark"
(procedure "QualisFunction" line 17)
invoked from within
"QualisFunction $x"
(lambda term "x {return [QualisFunction $x]}" line 1)
invoked from within
"apply $function1 $item2"
("foreach" body line 3)
invoked from within
"foreach item $searchResultList {
set item2 [lindex $item 3]
set sum1 [expr $sum1 + [apply $function1 $item2]]
set sum2 [expr $sum2 + [apply $..."
invoked from within
"if ![string equal 0 $entryEvaluationFunctions] {
set function1 [lindex $entryEvaluationFunctions 0]
set function2 [lindex $entryEvaluationFunction..."
invoked from within
"if [regexp "^\{<(.*)>\}$" $searchResultList m errorMessage] {
# the search expression has a syntax error
if $header {
if [info exists cgi(query)] {..."
(procedure "CreateOutput" line 170)
invoked from within
"CreateOutput $language $languageRep1 $languageRep2 $query {} Search {} $entryEvaluationFunctions2 [expr $maximumNumberOfEntries - 1] brief 1 {^$} 0 ..."
invoked from within
"if [info exists searchResultArray($itemName)] {
# Load $dirName/searchResult/$fileName output
set output $searchResultArray($itemName)
# set log "..."
(procedure "DisplayNumber" line 27)
invoked from within
"DisplayNumber $searchExpression2 $accent $case {} 0 DisplayEntryEvaluation $entryEvaluationFunctions"
(procedure "DisplayEntryEvaluation" line 3)
invoked from within
"DisplayEntryEvaluation {secondarym * and site banon} $entryEvaluationFunctions"
invoked from within
"subst {
Impact Factor
[DisplayEntryEvaluation {secondarym * and site banon} $entryEvaluationFunctions]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
13/07/10 13:21
CreateTclPage (first substitution):
domain error: argument not in valid range
while executing
"expr $x / $y."
(lambda term "{x y} {return [format %4.1f [expr $x / $y.]]}" line 1)
invoked from within
"apply $operation $sum1 $sum2"
invoked from within
"if ![string equal 0 $entryEvaluationFunctions] {
set function1 [lindex $entryEvaluationFunctions 0]
set function2 [lindex $entryEvaluationFunction..."
invoked from within
"if [regexp "^\{<(.*)>\}$" $searchResultList m errorMessage] {
# the search expression has a syntax error
if $header {
if [info exists cgi(query)] {..."
(procedure "CreateOutput" line 170)
invoked from within
"CreateOutput $language $languageRep1 $languageRep2 $query {} Search {} $entryEvaluationFunctions2 [expr $maximumNumberOfEntries - 1] brief 1 {^$} 0 ..."
invoked from within
"if [info exists searchResultArray($itemName)] {
# Load $dirName/searchResult/$fileName output
set output $searchResultArray($itemName)
# set log "..."
(procedure "DisplayNumber" line 27)
invoked from within
"DisplayNumber $searchExpression2 $accent $case {} 0 DisplayEntryEvaluation $entryEvaluationFunctions"
(procedure "DisplayEntryEvaluation" line 3)
invoked from within
"DisplayEntryEvaluation {secondarym * and firstgr cpt} $entryEvaluationFunctions"
invoked from within
"subst {
Impact Factor
[DisplayEntryEvaluation {secondarym * and site banon} $entryEvaluationFunctions]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
13/07/10 13:25
CreateTclPage (first substitution):
domain error: argument not in valid range
while executing
"expr $x / $y."
(lambda term "{x y} {return [format %4.1f [expr $x / $y.]]}" line 1)
invoked from within
"apply $operation $sum1 $sum2"
invoked from within
"if ![string equal 0 $entryEvaluationFunctions] {
set function1 [lindex $entryEvaluationFunctions 0]
set function2 [lindex $entryEvaluationFunction..."
invoked from within
"if [regexp "^\{<(.*)>\}$" $searchResultList m errorMessage] {
# the search expression has a syntax error
if $header {
if [info exists cgi(query)] {..."
(procedure "CreateOutput" line 170)
invoked from within
"CreateOutput $language $languageRep1 $languageRep2 $query {} Search {} $entryEvaluationFunctions2 [expr $maximumNumberOfEntries - 1] brief 1 {^$} 0 ..."
invoked from within
"if [info exists searchResultArray($itemName)] {
# Load $dirName/searchResult/$fileName output
set output $searchResultArray($itemName)
# set log "..."
(procedure "DisplayNumber" line 27)
invoked from within
"DisplayNumber $searchExpression2 $accent $case {} 0 DisplayEntryEvaluation $entryEvaluationFunctions"
(procedure "DisplayEntryEvaluation" line 3)
invoked from within
"DisplayEntryEvaluation {secondarym * and firstgr cpt} $entryEvaluationFunctions"
invoked from within
"subst {
Impact Factor
[DisplayEntryEvaluation {secondarym * and firstgr cpt} $entryEvaluationFunctions]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
13/07/10 13:26
CreateTclPage (first substitution):
StartCommunication: communication doesn't start: expected integer but got "800}"
invoked from within
"StartCommunication $serverName $urlibPort $async"
(procedure "SetFieldValue" line 5)
invoked from within
"SetFieldValue $site ${rep-i} secondarymark"
(procedure "QualisFunction" line 14)
invoked from within
"QualisFunction $x"
(lambda term "x {return [QualisFunction $x]}" line 1)
invoked from within
"apply $function1 $item"
("foreach" body line 2)
invoked from within
"foreach item $searchResultList {
set sum1 [expr $sum1 + [apply $function1 $item]]
set sum2 [expr $sum2 + [apply $function2 $item]]
}"
invoked from within
"if ![string equal 0 $entryEvaluationFunctions] {
set function1 [lindex $entryEvaluationFunctions 0]
set function2 [lindex $entryEvaluationFunction..."
invoked from within
"if [regexp "^\{<(.*)>\}$" $searchResultList m errorMessage] {
# the search expression has a syntax error
if $header {
if [info exists cgi(query)] {..."
(procedure "CreateOutput" line 170)
invoked from within
"CreateOutput $language $languageRep1 $languageRep2 $query {} Search {} $entryEvaluationFunctions2 [expr $maximumNumberOfEntries - 1] brief 1 {^$} 0 ..."
invoked from within
"if [info exists searchResultArray($itemName)] {
# Load $dirName/searchResult/$fileName output
set output $searchResultArray($itemName)
# set log "..."
(procedure "DisplayNumber" line 27)
invoked from within
"DisplayNumber $searchExpression2 $accent $case {} 0 DisplayEntryEvaluation $entryEvaluationFunctions"
(procedure "DisplayEntryEvaluation" line 3)
invoked from within
"DisplayEntryEvaluation {secondarym * and site banon} $entryEvaluationFunctions"
invoked from within
"subst {
Impact Factor
[DisplayEntryEvaluation {secondarym * and firstgr cpt} $entryEvaluationFunctions]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
13/07/10 13:28
CreateTclPage (first substitution):
invalid bareword "secondarymark"
in expression "secondarymark";
should be "$secondarymark" or "{secondarymark}" or "secondarymark(...)" or ...
(parsing expression "secondarymark")
invoked from within
"if $async {
# set s [socket -async $host $port]
if [catch {socket -async $host $port} s] {
# couldn't open socket: invalid argument
return -code..."
(procedure "StartCommunication" line 9)
invoked from within
"StartCommunication $serverName $urlibPort $async"
(procedure "SetFieldValue" line 5)
invoked from within
"SetFieldValue #!#join $site#@# ${rep-i} secondarymark"
(procedure "QualisFunction" line 14)
invoked from within
"QualisFunction $x"
(lambda term "x {return [QualisFunction $x]}" line 1)
invoked from within
"apply $function1 $item"
("foreach" body line 2)
invoked from within
"foreach item $searchResultList {
set sum1 [expr $sum1 + [apply $function1 $item]]
set sum2 [expr $sum2 + [apply $function2 $item]]
}"
invoked from within
"if ![string equal 0 $entryEvaluationFunctions] {
set function1 [lindex $entryEvaluationFunctions 0]
set function2 [lindex $entryEvaluationFunction..."
invoked from within
"if [regexp "^\{<(.*)>\}$" $searchResultList m errorMessage] {
# the search expression has a syntax error
if $header {
if [info exists cgi(query)] {..."
(procedure "CreateOutput" line 170)
invoked from within
"CreateOutput $language $languageRep1 $languageRep2 $query {} Search {} $entryEvaluationFunctions2 [expr $maximumNumberOfEntries - 1] brief 1 {^$} 0 ..."
invoked from within
"if [info exists searchResultArray($itemName)] {
# Load $dirName/searchResult/$fileName output
set output $searchResultArray($itemName)
# set log "..."
(procedure "DisplayNumber" line 27)
invoked from within
"DisplayNumber $searchExpression2 $accent $case {} 0 DisplayEntryEvaluation $entryEvaluationFunctions"
(procedure "DisplayEntryEvaluation" line 3)
invoked from within
"DisplayEntryEvaluation {secondarym * and site banon} $entryEvaluationFunctions"
invoked from within
"subst {
Impact Factor
[DisplayEntryEvaluation {secondarym * and site banon} $entryEvaluationFunctions]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
DisplayNumber: all the 1 searches have been made.
13/07/10 13:32
CreateTclPage (first substitution):
domain error: argument not in valid range
while executing
"expr $x / $y."
(lambda term "{x y} {return [format %4.1f [expr $x / $y.]]}" line 1)
invoked from within
"apply $operation $sum1 $sum2"
invoked from within
"if ![string equal 0 $entryEvaluationFunctions] {
set function1 [lindex $entryEvaluationFunctions 0]
set function2 [lindex $entryEvaluationFunction..."
invoked from within
"if [regexp "^\{<(.*)>\}$" $searchResultList m errorMessage] {
# the search expression has a syntax error
if $header {
if [info exists cgi(query)] {..."
(procedure "CreateOutput" line 170)
invoked from within
"CreateOutput $language $languageRep1 $languageRep2 $query {} Search {} $entryEvaluationFunctions2 [expr $maximumNumberOfEntries - 1] brief 1 {^$} 0 ..."
invoked from within
"if [info exists searchResultArray($itemName)] {
# Load $dirName/searchResult/$fileName output
set output $searchResultArray($itemName)
# set log "..."
(procedure "DisplayNumber" line 27)
invoked from within
"DisplayNumber $searchExpression2 $accent $case {} 0 DisplayEntryEvaluation $entryEvaluationFunctions"
(procedure "DisplayEntryEvaluation" line 3)
invoked from within
"DisplayEntryEvaluation {secondarym * and firstgr cpt} $entryEvaluationFunctions"
invoked from within
"subst {
Impact Factor
[DisplayEntryEvaluation {secondarym * and site banon} $entryEvaluationFunctions]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
13/07/10 16:54
CreateTclPage (first substitution):
can't read "markTable(A)": no such element in array
while executing
"Max $max $markTable($mark)"
(procedure "QualisFunction" line 18)
invoked from within
"QualisFunction $x"
(lambda term "x {return [QualisFunction $x]}" line 1)
invoked from within
"apply $function1 $item"
("foreach" body line 2)
invoked from within
"foreach item $searchResultList {
set sum1 [expr $sum1 + [apply $function1 $item]]
set sum2 [expr $sum2 + [apply $function2 $item]]
}"
invoked from within
"if ![string equal 0 $entryEvaluationFunctions] {
set function1 [lindex $entryEvaluationFunctions 0]
set function2 [lindex $entryEvaluationFunction..."
invoked from within
"if [regexp "^\{<(.*)>\}$" $searchResultList m errorMessage] {
# the search expression has a syntax error
if $header {
if [info exists cgi(query)] {..."
(procedure "CreateOutput" line 170)
invoked from within
"CreateOutput $language $languageRep1 $languageRep2 $query {} Search {} $entryEvaluationFunctions2 [expr $maximumNumberOfEntries - 1] brief 1 {^$} 0 ..."
invoked from within
"if [info exists searchResultArray($itemName)] {
# Load $dirName/searchResult/$fileName output
set output $searchResultArray($itemName)
# set log "..."
(procedure "DisplayNumber" line 27)
invoked from within
"DisplayNumber $searchExpression2 $accent $case {} 0 DisplayEntryEvaluation $entryEvaluationFunctions"
(procedure "DisplayEntryEvaluation" line 3)
invoked from within
"DisplayEntryEvaluation {secondarym * and firstgr cpt} $entryEvaluationFunctions"
invoked from within
"subst {
Impact Factor
[DisplayEntryEvaluation {secondarym * and firstgr cpt} $entryEvaluationFunctions]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
Trace from DisplayNumber: the search expression was
Impact Factor
[DisplayEntryEvaluation {secondarym * and firstgr cpt} $entryEvaluationFunctions]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
13/07/10 20:48
CreateTclPage (first substitution):
invalid command name "apply"
while executing
"apply $function1 $item"
("foreach" body line 2)
invoked from within
"foreach item $searchResultList {
set sum1 [expr $sum1 + [apply $function1 $item]]
set sum2 [expr $sum2 + [apply $function2 $item]]
}"
invoked from within
"if ![string equal 0 $entryEvaluationFunctions] {
set function1 [lindex $entryEvaluationFunctions 0]
set function2 [lindex $entryEvaluationFunction..."
invoked from within
"if [regexp "^\{<(.*)>\}$" $searchResultList m errorMessage] {
# the search expression has a syntax error
if $header {
if [info exists cgi(query)] {..."
(procedure "CreateOutput" line 170)
invoked from within
"CreateOutput $language $languageRep1 $languageRep2 $query {} Search {} $entryEvaluationFunctions2 [expr $maximumNumberOfEntries - 1] brief 1 {^$} 0 ..."
invoked from within
"if [info exists searchResultArray($itemName)] {
# Load $dirName/searchResult/$fileName output
set output $searchResultArray($itemName)
# set log "..."
(procedure "DisplayNumber" line 27)
invoked from within
"DisplayNumber $searchExpression2 $accent $case {} 0 DisplayEntryEvaluation $entryEvaluationFunctions"
(procedure "DisplayEntryEvaluation" line 3)
invoked from within
"DisplayEntryEvaluation {secondarym * and firstgr cpt and y 2010 and site plutao*} $entryEvaluationFunctions"
invoked from within
"subst {
Impact Factor
[DisplayEntryEvaluation {secondarym * and firstgr cpt and y 2010} $entryEvaluationFunctions]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
13/07/10 20:57
CreateTclPage (first substitution):
invalid command name "apply"
while executing
"apply $function1 $item"
("foreach" body line 2)
invoked from within
"foreach item $searchResultList {
set sum1 [expr $sum1 + [apply $function1 $item]]
set sum2 [expr $sum2 + [apply $function2 $item]]
}"
invoked from within
"if ![string equal 0 $entryEvaluationFunctions] {
set function1 [lindex $entryEvaluationFunctions 0]
set function2 [lindex $entryEvaluationFunction..."
invoked from within
"if [regexp "^\{<(.*)>\}$" $searchResultList m errorMessage] {
# the search expression has a syntax error
if $header {
if [info exists cgi(query)] {..."
(procedure "CreateOutput" line 170)
invoked from within
"CreateOutput $language $languageRep1 $languageRep2 $query {} Search {} $entryEvaluationFunctions2 [expr $maximumNumberOfEntries - 1] brief 1 {^$} 0 ..."
invoked from within
"if [info exists searchResultArray($itemName)] {
# Load $dirName/searchResult/$fileName output
set output $searchResultArray($itemName)
# set log "..."
(procedure "DisplayNumber" line 27)
invoked from within
"DisplayNumber $searchExpression2 $accent $case {} 0 DisplayEntryEvaluation $entryEvaluationFunctions"
(procedure "DisplayEntryEvaluation" line 3)
invoked from within
"DisplayEntryEvaluation {secondarym * and firstgr cpt and y 2010} $entryEvaluationFunctions"
invoked from within
"subst {
Impact Factor
[DisplayEntryEvaluation {secondarym * and firstgr cpt and y 2010 and site plutao*} $entryEvaluationFunctions]
Last update: [clock format [clock second] -format "%Y, %b %d"]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
DisplayNumber: all the 1 searches have been made.
DisplayNumber: all the 1 searches have been made.
CreateTclPage: not all the queries have been satisfied
while executing
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
list must have an even number of elements
while executing
"array set searchResultArray $searchResultList"
invoked from within
"interp eval slave {array set searchResultArray $searchResultList} "
invoked from within
"if [file exists $dirName/searchResult.tcl] {
interp eval slave [list source $dirName/searchResult.tcl] ;# set searchResultList
interp eval slave {..."
(procedure "CreateTclPage" line 255)
invoked from within
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
list must have an even number of elements
while executing
"array set searchResultArray $searchResultList"
invoked from within
"interp eval slave {array set searchResultArray $searchResultList} "
invoked from within
"if [file exists $dirName/searchResult.tcl] {
interp eval slave [list source $dirName/searchResult.tcl] ;# set searchResultList
interp eval slave {..."
(procedure "CreateTclPage" line 255)
invoked from within
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
list must have an even number of elements
while executing
"array set searchResultArray $searchResultList"
invoked from within
"interp eval slave {array set searchResultArray $searchResultList} "
invoked from within
"if [file exists $dirName/searchResult.tcl] {
interp eval slave [list source $dirName/searchResult.tcl] ;# set searchResultList
interp eval slave {..."
(procedure "CreateTclPage" line 255)
invoked from within
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
list must have an even number of elements
while executing
"array set searchResultArray $searchResultList"
invoked from within
"interp eval slave {array set searchResultArray $searchResultList} "
invoked from within
"if [file exists $dirName/searchResult.tcl] {
interp eval slave [list source $dirName/searchResult.tcl] ;# set searchResultList
interp eval slave {..."
(procedure "CreateTclPage" line 255)
invoked from within
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
list must have an even number of elements
while executing
"array set searchResultArray $searchResultList"
invoked from within
"interp eval slave {array set searchResultArray $searchResultList} "
invoked from within
"if [file exists $dirName/searchResult.tcl] {
interp eval slave [list source $dirName/searchResult.tcl] ;# set searchResultList
interp eval slave {..."
(procedure "CreateTclPage" line 255)
invoked from within
"CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword"
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
DisplayNumber: all the 5 searches have been made.
14/07/10 17:27
CreateTclPage (first substitution):
invalid command name "Mean"
while executing
"Mean $dataList"
(procedure "Qualis" line 27)
invoked from within
"Qualis {secondarym * and y 2010 and firstgr CEA} $siteList"
invoked from within
"subst {
Impact Factor
[DisplayEntryEvaluation {secondarym * and firstgr cpt and y 2010} $entryEvaluationFunctions]
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
CEA
CPT
CST
CTE
OBT
[Qualis {secondarym * and y 2010 and firstgr CEA} $siteList]
[Qualis {secondarym * and y 2010 and firstgr CPT} $siteList]
[Qualis {secondarym * and y 2010 and firstgr CST} $siteList]
[Qualis {secondarym * and y 2010 and firstgr CTE} $siteList]
[Qualis {secondarym * and y 2010 and firstgr OBT} $siteList]
Os valores foram obtidos com base na melhor classificão do Qualis da CAPES de cada revista.
Tabela gerada automaticamente pelo URLibService.
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
CEA
CPT
CST
CTE
OBT
Qualis
$qualisCEA
$qualisCPT
$qualisCST
$qualisCTE
$qualisOBT
x
$porcentagemQualisCEA
$porcentagemQualisCPT
$porcentagemQualisCST
$porcentagemQualisCTE
$porcentagemQualisOBT
O fator de impacto é a média das melhores classificacões do Qualis da CAPES das revistas
divulgando artigos com autoria INPE no ano de 2010.
Os intervalos correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
Por exemplo, a melhor qualificação do Qualis da CAPES da revista Geophysical Research Letters, com base na tabela Qualis abaixo desta revista, é A1.
Geophysical Research Letters | |
Área | Qualis |
ASTRONOMIA / FÍSICA | B1 |
CIÊNCIAS AGRÁRIAS I | A1 |
ECOLOGIA E MEIO AMBIENTE | A2 |
ENGENHARIAS I | A1 |
ENGENHARIAS II | A2 |
ENGENHARIAS III | A1 |
ENGENHARIAS IV | B1 |
GEOCIÊNCIAS | A1 |
GEOGRAFIA | A1 |
INTERDISCIPLINAR | A1 |
Usando a tabela abaixo de conversão das qualificações do Qualis para inteiros decimais, a melhor qualificação (convertido em decimal) do Qualis da CAPES da revista Geophysical Research Letters é 7.
Tabela de conversão | |
Qualis | Nota |
A1 | 7 |
A2 | 6 |
B5 | 5 |
B4 | 4 |
B3 | 3 |
B2 | 2 |
B1 | 1 |
C | 0 |
A tabela abaixo fornece, para o ano de 2010, o FQ por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
FQ | $qualisCEA | $qualisCPT | $qualisCST | $qualisCTE | $qualisOBT | $qualisINPE |
artigos avaliados | ${porcentagemQualisCEA}% | ${porcentagemQualisCPT}% | ${porcentagemQualisCST}% | ${porcentagemQualisCTE}% | ${porcentagemQualisOBT}% | ${porcentagemQualisINPE}% |
Os intervalos aparecendo na tabela correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
2. Indicadores de Armazenamento Digital (IAD), Acesso Livre (IAL) e Presença na Web (IPW)
Os três indicadores são expressos em %. Os IAD, IAL e IPW são definidos por:
IAD = 100 * TC / T,
IAL = 100 * TCL / TC,
IPW = 100 * TCL / T,
onde:
Um IAD de 100% significa que todas as obras registradas estão na forma digital.
Um IAL de 100% significa que todas as obras na forma digital estão disponíveis livremente na Web.
Um IAL de 100% significa que todas as obras registradas no repositório estão disponíveis livremente na Web.
A tabela abaixo fornece, para o ano de 2010, os IAD, IAL e IPW por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
IAD | $CEAIAD% | $CPTIAD% | $CSTIAD% | $CTEIAD% | $OBTIAD% | $INPEIAD% |
IAL | $CEAIAL% | $CPTIAL% | $CSTIAL% | $CTEIAL% | $OBTIAL% | $INPEIAL% |
IAL | $CEAIPW% | $CPTIPW% | $CSTIPW% | $CTEIPW% | $OBTIPW% | $INPEIPW% |
Tabela gerada automaticamente pelo URLibService.
while executing "CreateTclPage $thisRepository $fileContent $language $languageRep2 $path $writeUserCodedPassword" 09/12/11 12:05 09/12/11 12:05 CreateTclPage (first substitution): can't read "journalIAL": no such variable while executing "subst {
Tabelas dos indicadores FQ, IAD, IAL e IPW por coordenadorias e para o INPE
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
O fator de qualidade FQ e os três indicadores IAD, IAL e IPW foram propostos por G. J. F. Banon. O fator de qualidade foi aprovado pelo Conselho de Editoração e Preservação da Produção Intelectual do INPE em sua reunião do dia 25 de outubro de 2011.
1. Fator de qualidade (FQ)
O FQ pode assumir valores de 0 a 10, ele é independente da quantidade produzida, quando maior é o FQ maior é a qualidade produzida. O FQ é definido por:
FQ = (1 / n) ∑ i = 1, ..., n f(qualis(i)),
onde:
Tabela de conversão f | |
Qualis | Nota |
A1 | 10 |
A2 | 8.6 |
B5 | 7.1 |
B4 | 5.7 |
B3 | 4.3 |
B2 | 2.9 |
B1 | 1.4 |
C | 0 |
Por exemplo, a melhor qualificação do Qualis da CAPES da revista Geophysical Research Letters, com base na tabela Qualis abaixo desta revista, é A1.
Geophysical Research Letters | |
Área | Qualis |
ASTRONOMIA / FÍSICA | B1 |
CIÊNCIAS AGRÁRIAS I | A1 |
ECOLOGIA E MEIO AMBIENTE | A2 |
ENGENHARIAS I | A1 |
ENGENHARIAS II | A2 |
ENGENHARIAS III | A1 |
ENGENHARIAS IV | B1 |
GEOCIÊNCIAS | A1 |
GEOGRAFIA | A1 |
INTERDISCIPLINAR | A1 |
Usando a tabela de conversão f das qualificações do Qualis para decimais, a nota da revista Geophysical Research Letters é f(A1) = 10.
A tabela abaixo fornece, para o ano de 2011, o FQ por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
FQ | $qualisCEA | $qualisCPT | $qualisCST | $qualisCTE | $qualisOBT | $qualisINPE |
artigos avaliados | ${porcentagemQualisCEA}% | ${porcentagemQualisCPT}% | ${porcentagemQualisCST}% | ${porcentagemQualisCTE}% | ${porcentagemQualisOBT}% | ${porcentagemQualisINPE}% |
Os intervalos aparecendo na tabela correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
2. Indicadores de Armazenamento Digital (IAD), Acesso Livre (IAL) e Presença na Web (IPW)
Os três indicadores são expressos em %. Os IAD, IAL e IPW são definidos por:
IAD = 100 * TC / T,
IAL = 100 * TCL / TC,
IPW = 100 * TCL / T,
onde:
Um IAD de 100% significa que todas as obras registradas estão na forma digital.
Um IAL de 100% significa que todas as obras na forma digital estão disponíveis livremente na Web.
Um IAL de 100% significa que todas as obras registradas no repositório estão disponíveis livremente na Web.
A tabela abaixo fornece, para o ano de 2011, os IAD, IAL e IPW por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
IAD | $CEAIAD% | $CPTIAD% | $CSTIAD% | $CTEIAD% | $OBTIAD% | $INPEIAD% |
IAL | $CEAIAL% | $CPTIAL% | $CSTIAL% | $CTEIAL% | $OBTIAL% | $INPEIAL% |
IPW | $CEAIPW% | $CPTIPW% | $CSTIPW% | $CTEIPW% | $OBTIPW% | $INPEIPW% |
Tabela gerada automaticamente pelo URLibService.
A tabela abaixo fornece, para o ano de 2011, os IAD, IAL e IPW por tipos de referência.
Artigos em periódico | Artigos em evento | Todas | |
IAD | $journalIAD% | $conferenceIAD% | $totalIAD% |
IAL | $journalIAL% | $conferenceIAL% | $totalIAL% |
IPW | $journalIPW% | $conferenceIPW% | $totalIPW% |
Tabela gerada automaticamente pelo URLibService.
Tabelas dos indicadores FQ,IAD, IAL e IPW para o INPE em 2012
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
O fator de qualidade FQ e os três indicadores IAD, IAL e IPW foram propostos por G. J. F. Banon. O fator de qualidade foi aprovado pelo Conselho de Editoração e Preservação da Produção Intelectual do INPE em sua reunião do dia 25 de outubro de 2010.
1. Fator de qualidade (FQ)
O FQ pode assumir valores de 0 a 10, ele é independente da quantidade produzida, quando maior é o FQ maior é a qualidade produzida. O FQ é definido por:
FQ = (1 / n) ∑ i = 1, ..., n f(qualis(i)),
onde:
Tabela de conversão f | |
Qualis | Nota |
A1 | 10 |
A2 | 8.6 |
B5 | 7.1 |
B4 | 5.7 |
B3 | 4.3 |
B2 | 2.9 |
B1 | 1.4 |
C | 0 |
Por exemplo, a melhor qualificação do Qualis da CAPES da revista Geophysical Research Letters, com base na tabela Qualis abaixo desta revista, é A1.
Geophysical Research Letters | |
Área | Qualis |
ASTRONOMIA / FÍSICA | B1 |
CIÊNCIAS AGRÁRIAS I | A1 |
ECOLOGIA E MEIO AMBIENTE | A2 |
ENGENHARIAS I | A1 |
ENGENHARIAS II | A2 |
ENGENHARIAS III | A1 |
ENGENHARIAS IV | B1 |
GEOCIÊNCIAS | A1 |
GEOGRAFIA | A1 |
INTERDISCIPLINAR | A1 |
Usando a tabela de conversão f das qualificações do Qualis para decimais, a nota da revista Geophysical Research Letters é f(A1) = 10.
A tabela abaixo fornece, para o ano de 2012, o FQ por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
FQ | $qualisCEA | $qualisCPT | $qualisCST | $qualisCTE | $qualisOBT | $qualisINPE |
artigos avaliados | ${porcentagemQualisCEA}% | ${porcentagemQualisCPT}% | ${porcentagemQualisCST}% | ${porcentagemQualisCTE}% | ${porcentagemQualisOBT}% | ${porcentagemQualisINPE}% |
Os intervalos aparecendo na tabela correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
2. Indicadores de Armazenamento Digital (IAD), Acesso Livre (IAL) e Presença na Web (IPW)
Os três indicadores são expressos em %. Os IAD, IAL e IPW são definidos por:
IAD = 100 * TC / T,
IAL = 100 * TCL / TC,
IPW = 100 * TCL / T,
onde:
Um IAD de 100% significa que todas as obras registradas estão na forma digital.
Um IAL de 100% significa que todas as obras na forma digital estão disponíveis livremente na Web.
Um IAL de 100% significa que todas as obras registradas no repositório estão disponíveis livremente na Web.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
IAD | $CEAIAD% | $CPTIAD% | $CSTIAD% | $CTEIAD% | $OBTIAD% | $INPEIAD% |
IAL | $CEAIAL% | $CPTIAL% | $CSTIAL% | $CTEIAL% | $OBTIAL% | $INPEIAL% |
IPW | $CEAIPW% | $CPTIPW% | $CSTIPW% | $CTEIPW% | $OBTIPW% | $INPEIPW% |
Tabela gerada automaticamente pelo URLibService.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por tipos de referência.
Artigos em periódico | Artigos em evento | Todas | |
IAD | $journalIAD% | $conferenceIAD% | $totalIAD% |
IAL | $journalIAL% | $conferenceIAL% | $totalIAL% |
IPW | $journalIPW% | $conferenceIPW% | $totalIPW% |
Tabela gerada automaticamente pelo URLibService.
Tabelas dos indicadores FQ,IAD, IAL e IPW para o INPE em 2012
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
O fator de qualidade FQ e os três indicadores IAD, IAL e IPW foram propostos por G. J. F. Banon. O fator de qualidade foi aprovado pelo Conselho de Editoração e Preservação da Produção Intelectual do INPE em sua reunião do dia 25 de outubro de 2010.
1. Fator de qualidade (FQ)
O FQ pode assumir valores de 0 a 10, ele é independente da quantidade produzida, quando maior é o FQ maior é a qualidade produzida. O FQ é definido por:
FQ = (1 / n) ∑ i = 1, ..., n f(qualis(i)),
onde:
Tabela de conversão f | |
Qualis | Nota |
A1 | 10 |
A2 | 8.6 |
B5 | 7.1 |
B4 | 5.7 |
B3 | 4.3 |
B2 | 2.9 |
B1 | 1.4 |
C | 0 |
Por exemplo, a melhor qualificação do Qualis da CAPES da revista Geophysical Research Letters, com base na tabela Qualis abaixo desta revista, é A1.
Geophysical Research Letters | |
Área | Qualis |
ASTRONOMIA / FÍSICA | B1 |
CIÊNCIAS AGRÁRIAS I | A1 |
ECOLOGIA E MEIO AMBIENTE | A2 |
ENGENHARIAS I | A1 |
ENGENHARIAS II | A2 |
ENGENHARIAS III | A1 |
ENGENHARIAS IV | B1 |
GEOCIÊNCIAS | A1 |
GEOGRAFIA | A1 |
INTERDISCIPLINAR | A1 |
Usando a tabela de conversão f das qualificações do Qualis para decimais, a nota da revista Geophysical Research Letters é f(A1) = 10.
A tabela abaixo fornece, para o ano de 2012, o FQ por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
FQ | $qualisCEA | $qualisCPT | $qualisCST | $qualisCTE | $qualisOBT | $qualisINPE |
artigos avaliados | ${porcentagemQualisCEA}% | ${porcentagemQualisCPT}% | ${porcentagemQualisCST}% | ${porcentagemQualisCTE}% | ${porcentagemQualisOBT}% | ${porcentagemQualisINPE}% |
Os intervalos aparecendo na tabela correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
2. Indicadores de Armazenamento Digital (IAD), Acesso Livre (IAL) e Presença na Web (IPW)
Os três indicadores são expressos em %. Os IAD, IAL e IPW são definidos por:
IAD = 100 * TC / T,
IAL = 100 * TCL / TC,
IPW = 100 * TCL / T,
onde:
Um IAD de 100% significa que todas as obras registradas estão na forma digital.
Um IAL de 100% significa que todas as obras na forma digital estão disponíveis livremente na Web.
Um IAL de 100% significa que todas as obras registradas no repositório estão disponíveis livremente na Web.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
IAD | $CEAIAD% | $CPTIAD% | $CSTIAD% | $CTEIAD% | $OBTIAD% | $INPEIAD% |
IAL | $CEAIAL% | $CPTIAL% | $CSTIAL% | $CTEIAL% | $OBTIAL% | $INPEIAL% |
IPW | $CEAIPW% | $CPTIPW% | $CSTIPW% | $CTEIPW% | $OBTIPW% | $INPEIPW% |
Tabela gerada automaticamente pelo URLibService.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por tipos de referência.
Artigos em periódico | Artigos em evento | Todas | |
IAD | $journalIAD% | $conferenceIAD% | $totalIAD% |
IAL | $journalIAL% | $conferenceIAL% | $totalIAL% |
IPW | $journalIPW% | $conferenceIPW% | $totalIPW% |
Tabela gerada automaticamente pelo URLibService.
Tabelas dos indicadores FQ,IAD, IAL e IPW para o INPE em 2012
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
O fator de qualidade FQ e os três indicadores IAD, IAL e IPW foram propostos por G. J. F. Banon. O fator de qualidade foi aprovado pelo Conselho de Editoração e Preservação da Produção Intelectual do INPE em sua reunião do dia 25 de outubro de 2010.
1. Fator de qualidade (FQ)
O FQ pode assumir valores de 0 a 10, ele é independente da quantidade produzida, quando maior é o FQ maior é a qualidade produzida. O FQ é definido por:
FQ = (1 / n) ∑ i = 1, ..., n f(qualis(i)),
onde:
Tabela de conversão f | |
Qualis | Nota |
A1 | 10 |
A2 | 8.6 |
B5 | 7.1 |
B4 | 5.7 |
B3 | 4.3 |
B2 | 2.9 |
B1 | 1.4 |
C | 0 |
Por exemplo, a melhor qualificação do Qualis da CAPES da revista Geophysical Research Letters, com base na tabela Qualis abaixo desta revista, é A1.
Geophysical Research Letters | |
Área | Qualis |
ASTRONOMIA / FÍSICA | B1 |
CIÊNCIAS AGRÁRIAS I | A1 |
ECOLOGIA E MEIO AMBIENTE | A2 |
ENGENHARIAS I | A1 |
ENGENHARIAS II | A2 |
ENGENHARIAS III | A1 |
ENGENHARIAS IV | B1 |
GEOCIÊNCIAS | A1 |
GEOGRAFIA | A1 |
INTERDISCIPLINAR | A1 |
Usando a tabela de conversão f das qualificações do Qualis para decimais, a nota da revista Geophysical Research Letters é f(A1) = 10.
A tabela abaixo fornece, para o ano de 2012, o FQ por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
FQ | $qualisCEA | $qualisCPT | $qualisCST | $qualisCTE | $qualisOBT | $qualisINPE |
artigos avaliados | ${porcentagemQualisCEA}% | ${porcentagemQualisCPT}% | ${porcentagemQualisCST}% | ${porcentagemQualisCTE}% | ${porcentagemQualisOBT}% | ${porcentagemQualisINPE}% |
Os intervalos aparecendo na tabela correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
2. Indicadores de Armazenamento Digital (IAD), Acesso Livre (IAL) e Presença na Web (IPW)
Os três indicadores são expressos em %. Os IAD, IAL e IPW são definidos por:
IAD = 100 * TC / T,
IAL = 100 * TCL / TC,
IPW = 100 * TCL / T,
onde:
Um IAD de 100% significa que todas as obras registradas estão na forma digital.
Um IAL de 100% significa que todas as obras na forma digital estão disponíveis livremente na Web.
Um IAL de 100% significa que todas as obras registradas no repositório estão disponíveis livremente na Web.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
IAD | $CEAIAD% | $CPTIAD% | $CSTIAD% | $CTEIAD% | $OBTIAD% | $INPEIAD% |
IAL | $CEAIAL% | $CPTIAL% | $CSTIAL% | $CTEIAL% | $OBTIAL% | $INPEIAL% |
IPW | $CEAIPW% | $CPTIPW% | $CSTIPW% | $CTEIPW% | $OBTIPW% | $INPEIPW% |
Tabela gerada automaticamente pelo URLibService.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por tipos de referência.
Artigos em periódico | Artigos em evento | Todas | |
IAD | $journalIAD% | $conferenceIAD% | $totalIAD% |
IAL | $journalIAL% | $conferenceIAL% | $totalIAL% |
IPW | $journalIPW% | $conferenceIPW% | $totalIPW% |
Tabela gerada automaticamente pelo URLibService.
Tabelas dos indicadores FQ,IAD, IAL e IPW para o INPE em 2012
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
O fator de qualidade FQ e os três indicadores IAD, IAL e IPW foram propostos por G. J. F. Banon. O fator de qualidade foi aprovado pelo Conselho de Editoração e Preservação da Produção Intelectual do INPE em sua reunião do dia 25 de outubro de 2010.
1. Fator de qualidade (FQ)
O FQ pode assumir valores de 0 a 10, ele é independente da quantidade produzida, quando maior é o FQ maior é a qualidade produzida. O FQ é definido por:
FQ = (1 / n) ∑ i = 1, ..., n f(qualis(i)),
onde:
Tabela de conversão f | |
Qualis | Nota |
A1 | 10 |
A2 | 8.6 |
B5 | 7.1 |
B4 | 5.7 |
B3 | 4.3 |
B2 | 2.9 |
B1 | 1.4 |
C | 0 |
Por exemplo, a melhor qualificação do Qualis da CAPES da revista Geophysical Research Letters, com base na tabela Qualis abaixo desta revista, é A1.
Geophysical Research Letters | |
Área | Qualis |
ASTRONOMIA / FÍSICA | B1 |
CIÊNCIAS AGRÁRIAS I | A1 |
ECOLOGIA E MEIO AMBIENTE | A2 |
ENGENHARIAS I | A1 |
ENGENHARIAS II | A2 |
ENGENHARIAS III | A1 |
ENGENHARIAS IV | B1 |
GEOCIÊNCIAS | A1 |
GEOGRAFIA | A1 |
INTERDISCIPLINAR | A1 |
Usando a tabela de conversão f das qualificações do Qualis para decimais, a nota da revista Geophysical Research Letters é f(A1) = 10.
A tabela abaixo fornece, para o ano de 2012, o FQ por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
FQ | $qualisCEA | $qualisCPT | $qualisCST | $qualisCTE | $qualisOBT | $qualisINPE |
artigos avaliados | ${porcentagemQualisCEA}% | ${porcentagemQualisCPT}% | ${porcentagemQualisCST}% | ${porcentagemQualisCTE}% | ${porcentagemQualisOBT}% | ${porcentagemQualisINPE}% |
Os intervalos aparecendo na tabela correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
2. Indicadores de Armazenamento Digital (IAD), Acesso Livre (IAL) e Presença na Web (IPW)
Os três indicadores são expressos em %. Os IAD, IAL e IPW são definidos por:
IAD = 100 * TC / T,
IAL = 100 * TCL / TC,
IPW = 100 * TCL / T,
onde:
Um IAD de 100% significa que todas as obras registradas estão na forma digital.
Um IAL de 100% significa que todas as obras na forma digital estão disponíveis livremente na Web.
Um IAL de 100% significa que todas as obras registradas no repositório estão disponíveis livremente na Web.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
IAD | $CEAIAD% | $CPTIAD% | $CSTIAD% | $CTEIAD% | $OBTIAD% | $INPEIAD% |
IAL | $CEAIAL% | $CPTIAL% | $CSTIAL% | $CTEIAL% | $OBTIAL% | $INPEIAL% |
IPW | $CEAIPW% | $CPTIPW% | $CSTIPW% | $CTEIPW% | $OBTIPW% | $INPEIPW% |
Tabela gerada automaticamente pelo URLibService.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por tipos de referência.
Artigos em periódico | Artigos em evento | Todas | |
IAD | $journalIAD% | $conferenceIAD% | $totalIAD% |
IAL | $journalIAL% | $conferenceIAL% | $totalIAL% |
IPW | $journalIPW% | $conferenceIPW% | $totalIPW% |
Tabela gerada automaticamente pelo URLibService.
Tabelas dos indicadores FQ,IAD, IAL e IPW para o INPE em 2012
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
O fator de qualidade FQ e os três indicadores IAD, IAL e IPW foram propostos por G. J. F. Banon. O fator de qualidade foi aprovado pelo Conselho de Editoração e Preservação da Produção Intelectual do INPE em sua reunião do dia 25 de outubro de 2010.
1. Fator de qualidade (FQ)
O FQ pode assumir valores de 0 a 10, ele é independente da quantidade produzida, quando maior é o FQ maior é a qualidade produzida. O FQ é definido por:
FQ = (1 / n) ∑ i = 1, ..., n f(qualis(i)),
onde:
Tabela de conversão f | |
Qualis | Nota |
A1 | 10 |
A2 | 8.6 |
B5 | 7.1 |
B4 | 5.7 |
B3 | 4.3 |
B2 | 2.9 |
B1 | 1.4 |
C | 0 |
Por exemplo, a melhor qualificação do Qualis da CAPES da revista Geophysical Research Letters, com base na tabela Qualis abaixo desta revista, é A1.
Geophysical Research Letters | |
Área | Qualis |
ASTRONOMIA / FÍSICA | B1 |
CIÊNCIAS AGRÁRIAS I | A1 |
ECOLOGIA E MEIO AMBIENTE | A2 |
ENGENHARIAS I | A1 |
ENGENHARIAS II | A2 |
ENGENHARIAS III | A1 |
ENGENHARIAS IV | B1 |
GEOCIÊNCIAS | A1 |
GEOGRAFIA | A1 |
INTERDISCIPLINAR | A1 |
Usando a tabela de conversão f das qualificações do Qualis para decimais, a nota da revista Geophysical Research Letters é f(A1) = 10.
A tabela abaixo fornece, para o ano de 2012, o FQ por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
FQ | $qualisCEA | $qualisCPT | $qualisCST | $qualisCTE | $qualisOBT | $qualisINPE |
artigos avaliados | ${porcentagemQualisCEA}% | ${porcentagemQualisCPT}% | ${porcentagemQualisCST}% | ${porcentagemQualisCTE}% | ${porcentagemQualisOBT}% | ${porcentagemQualisINPE}% |
Os intervalos aparecendo na tabela correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
2. Indicadores de Armazenamento Digital (IAD), Acesso Livre (IAL) e Presença na Web (IPW)
Os três indicadores são expressos em %. Os IAD, IAL e IPW são definidos por:
IAD = 100 * TC / T,
IAL = 100 * TCL / TC,
IPW = 100 * TCL / T,
onde:
Um IAD de 100% significa que todas as obras registradas estão na forma digital.
Um IAL de 100% significa que todas as obras na forma digital estão disponíveis livremente na Web.
Um IAL de 100% significa que todas as obras registradas no repositório estão disponíveis livremente na Web.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
IAD | $CEAIAD% | $CPTIAD% | $CSTIAD% | $CTEIAD% | $OBTIAD% | $INPEIAD% |
IAL | $CEAIAL% | $CPTIAL% | $CSTIAL% | $CTEIAL% | $OBTIAL% | $INPEIAL% |
IPW | $CEAIPW% | $CPTIPW% | $CSTIPW% | $CTEIPW% | $OBTIPW% | $INPEIPW% |
Tabela gerada automaticamente pelo URLibService.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por tipos de referência.
Artigos em periódico | Artigos em evento | Todas | |
IAD | $journalIAD% | $conferenceIAD% | $totalIAD% |
IAL | $journalIAL% | $conferenceIAL% | $totalIAL% |
IPW | $journalIPW% | $conferenceIPW% | $totalIPW% |
Tabela gerada automaticamente pelo URLibService.
Tabelas dos indicadores FQ,IAD, IAL e IPW para o INPE em 2012
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
O fator de qualidade FQ e os três indicadores IAD, IAL e IPW foram propostos por G. J. F. Banon. O fator de qualidade foi aprovado pelo Conselho de Editoração e Preservação da Produção Intelectual do INPE em sua reunião do dia 25 de outubro de 2010.
1. Fator de qualidade (FQ)
O FQ pode assumir valores de 0 a 10, ele é independente da quantidade produzida, quando maior é o FQ maior é a qualidade produzida. O FQ é definido por:
FQ = (1 / n) ∑ i = 1, ..., n f(qualis(i)),
onde:
Tabela de conversão f | |
Qualis | Nota |
A1 | 10 |
A2 | 8.6 |
B5 | 7.1 |
B4 | 5.7 |
B3 | 4.3 |
B2 | 2.9 |
B1 | 1.4 |
C | 0 |
Por exemplo, a melhor qualificação do Qualis da CAPES da revista Geophysical Research Letters, com base na tabela Qualis abaixo desta revista, é A1.
Geophysical Research Letters | |
Área | Qualis |
ASTRONOMIA / FÍSICA | B1 |
CIÊNCIAS AGRÁRIAS I | A1 |
ECOLOGIA E MEIO AMBIENTE | A2 |
ENGENHARIAS I | A1 |
ENGENHARIAS II | A2 |
ENGENHARIAS III | A1 |
ENGENHARIAS IV | B1 |
GEOCIÊNCIAS | A1 |
GEOGRAFIA | A1 |
INTERDISCIPLINAR | A1 |
Usando a tabela de conversão f das qualificações do Qualis para decimais, a nota da revista Geophysical Research Letters é f(A1) = 10.
A tabela abaixo fornece, para o ano de 2012, o FQ por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
FQ | $qualisCEA | $qualisCPT | $qualisCST | $qualisCTE | $qualisOBT | $qualisINPE |
artigos avaliados | ${porcentagemQualisCEA}% | ${porcentagemQualisCPT}% | ${porcentagemQualisCST}% | ${porcentagemQualisCTE}% | ${porcentagemQualisOBT}% | ${porcentagemQualisINPE}% |
Os intervalos aparecendo na tabela correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
2. Indicadores de Armazenamento Digital (IAD), Acesso Livre (IAL) e Presença na Web (IPW)
Os três indicadores são expressos em %. Os IAD, IAL e IPW são definidos por:
IAD = 100 * TC / T,
IAL = 100 * TCL / TC,
IPW = 100 * TCL / T,
onde:
Um IAD de 100% significa que todas as obras registradas estão na forma digital.
Um IAL de 100% significa que todas as obras na forma digital estão disponíveis livremente na Web.
Um IAL de 100% significa que todas as obras registradas no repositório estão disponíveis livremente na Web.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
IAD | $CEAIAD% | $CPTIAD% | $CSTIAD% | $CTEIAD% | $OBTIAD% | $INPEIAD% |
IAL | $CEAIAL% | $CPTIAL% | $CSTIAL% | $CTEIAL% | $OBTIAL% | $INPEIAL% |
IPW | $CEAIPW% | $CPTIPW% | $CSTIPW% | $CTEIPW% | $OBTIPW% | $INPEIPW% |
Tabela gerada automaticamente pelo URLibService.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por tipos de referência.
Artigos em periódico | Artigos em evento | Todas | |
IAD | $journalIAD% | $conferenceIAD% | $totalIAD% |
IAL | $journalIAL% | $conferenceIAL% | $totalIAL% |
IPW | $journalIPW% | $conferenceIPW% | $totalIPW% |
Tabela gerada automaticamente pelo URLibService.
Tabelas dos indicadores FQ,IAD, IAL e IPW para o INPE em 2012
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
O fator de qualidade FQ e os três indicadores IAD, IAL e IPW foram propostos por G. J. F. Banon. O fator de qualidade foi aprovado pelo Conselho de Editoração e Preservação da Produção Intelectual do INPE em sua reunião do dia 25 de outubro de 2010.
1. Fator de qualidade (FQ)
O FQ pode assumir valores de 0 a 10, ele é independente da quantidade produzida, quando maior é o FQ maior é a qualidade produzida. O FQ é definido por:
FQ = (1 / n) ∑ i = 1, ..., n f(qualis(i)),
onde:
Tabela de conversão f | |
Qualis | Nota |
A1 | 10 |
A2 | 8.6 |
B5 | 7.1 |
B4 | 5.7 |
B3 | 4.3 |
B2 | 2.9 |
B1 | 1.4 |
C | 0 |
Por exemplo, a melhor qualificação do Qualis da CAPES da revista Geophysical Research Letters, com base na tabela Qualis abaixo desta revista, é A1.
Geophysical Research Letters | |
Área | Qualis |
ASTRONOMIA / FÍSICA | B1 |
CIÊNCIAS AGRÁRIAS I | A1 |
ECOLOGIA E MEIO AMBIENTE | A2 |
ENGENHARIAS I | A1 |
ENGENHARIAS II | A2 |
ENGENHARIAS III | A1 |
ENGENHARIAS IV | B1 |
GEOCIÊNCIAS | A1 |
GEOGRAFIA | A1 |
INTERDISCIPLINAR | A1 |
Usando a tabela de conversão f das qualificações do Qualis para decimais, a nota da revista Geophysical Research Letters é f(A1) = 10.
A tabela abaixo fornece, para o ano de 2012, o FQ por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
FQ | $qualisCEA | $qualisCPT | $qualisCST | $qualisCTE | $qualisOBT | $qualisINPE |
artigos avaliados | ${porcentagemQualisCEA}% | ${porcentagemQualisCPT}% | ${porcentagemQualisCST}% | ${porcentagemQualisCTE}% | ${porcentagemQualisOBT}% | ${porcentagemQualisINPE}% |
Os intervalos aparecendo na tabela correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
2. Indicadores de Armazenamento Digital (IAD), Acesso Livre (IAL) e Presença na Web (IPW)
Os três indicadores são expressos em %. Os IAD, IAL e IPW são definidos por:
IAD = 100 * TC / T,
IAL = 100 * TCL / TC,
IPW = 100 * TCL / T,
onde:
Um IAD de 100% significa que todas as obras registradas estão na forma digital.
Um IAL de 100% significa que todas as obras na forma digital estão disponíveis livremente na Web.
Um IAL de 100% significa que todas as obras registradas no repositório estão disponíveis livremente na Web.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
IAD | $CEAIAD% | $CPTIAD% | $CSTIAD% | $CTEIAD% | $OBTIAD% | $INPEIAD% |
IAL | $CEAIAL% | $CPTIAL% | $CSTIAL% | $CTEIAL% | $OBTIAL% | $INPEIAL% |
IPW | $CEAIPW% | $CPTIPW% | $CSTIPW% | $CTEIPW% | $OBTIPW% | $INPEIPW% |
Tabela gerada automaticamente pelo URLibService.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por tipos de referência.
Artigos em periódico | Artigos em evento | Todas | |
IAD | $journalIAD% | $conferenceIAD% | $totalIAD% |
IAL | $journalIAL% | $conferenceIAL% | $totalIAL% |
IPW | $journalIPW% | $conferenceIPW% | $totalIPW% |
Tabela gerada automaticamente pelo URLibService.
Tabelas dos indicadores FQ,IAD, IAL e IPW para o INPE em 2012
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
O fator de qualidade FQ e os três indicadores IAD, IAL e IPW foram propostos por G. J. F. Banon. O fator de qualidade foi aprovado pelo Conselho de Editoração e Preservação da Produção Intelectual do INPE em sua reunião do dia 25 de outubro de 2010.
1. Fator de qualidade (FQ)
O FQ pode assumir valores de 0 a 10, ele é independente da quantidade produzida, quando maior é o FQ maior é a qualidade produzida. O FQ é definido por:
FQ = (1 / n) ∑ i = 1, ..., n f(qualis(i)),
onde:
Tabela de conversão f | |
Qualis | Nota |
A1 | 10 |
A2 | 8.6 |
B5 | 7.1 |
B4 | 5.7 |
B3 | 4.3 |
B2 | 2.9 |
B1 | 1.4 |
C | 0 |
Por exemplo, a melhor qualificação do Qualis da CAPES da revista Geophysical Research Letters, com base na tabela Qualis abaixo desta revista, é A1.
Geophysical Research Letters | |
Área | Qualis |
ASTRONOMIA / FÍSICA | B1 |
CIÊNCIAS AGRÁRIAS I | A1 |
ECOLOGIA E MEIO AMBIENTE | A2 |
ENGENHARIAS I | A1 |
ENGENHARIAS II | A2 |
ENGENHARIAS III | A1 |
ENGENHARIAS IV | B1 |
GEOCIÊNCIAS | A1 |
GEOGRAFIA | A1 |
INTERDISCIPLINAR | A1 |
Usando a tabela de conversão f das qualificações do Qualis para decimais, a nota da revista Geophysical Research Letters é f(A1) = 10.
A tabela abaixo fornece, para o ano de 2012, o FQ por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
FQ | $qualisCEA | $qualisCPT | $qualisCST | $qualisCTE | $qualisOBT | $qualisINPE |
artigos avaliados | ${porcentagemQualisCEA}% | ${porcentagemQualisCPT}% | ${porcentagemQualisCST}% | ${porcentagemQualisCTE}% | ${porcentagemQualisOBT}% | ${porcentagemQualisINPE}% |
Os intervalos aparecendo na tabela correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
2. Indicadores de Armazenamento Digital (IAD), Acesso Livre (IAL) e Presença na Web (IPW)
Os três indicadores são expressos em %. Os IAD, IAL e IPW são definidos por:
IAD = 100 * TC / T,
IAL = 100 * TCL / TC,
IPW = 100 * TCL / T,
onde:
Um IAD de 100% significa que todas as obras registradas estão na forma digital.
Um IAL de 100% significa que todas as obras na forma digital estão disponíveis livremente na Web.
Um IAL de 100% significa que todas as obras registradas no repositório estão disponíveis livremente na Web.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
IAD | $CEAIAD% | $CPTIAD% | $CSTIAD% | $CTEIAD% | $OBTIAD% | $INPEIAD% |
IAL | $CEAIAL% | $CPTIAL% | $CSTIAL% | $CTEIAL% | $OBTIAL% | $INPEIAL% |
IPW | $CEAIPW% | $CPTIPW% | $CSTIPW% | $CTEIPW% | $OBTIPW% | $INPEIPW% |
Tabela gerada automaticamente pelo URLibService.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por tipos de referência.
Artigos em periódico | Artigos em evento | Todas | |
IAD | $journalIAD% | $conferenceIAD% | $totalIAD% |
IAL | $journalIAL% | $conferenceIAL% | $totalIAL% |
IPW | $journalIPW% | $conferenceIPW% | $totalIPW% |
Tabela gerada automaticamente pelo URLibService.
Tabelas dos indicadores FQ,IAD, IAL e IPW para o INPE em 2012
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
O fator de qualidade FQ e os três indicadores IAD, IAL e IPW foram propostos por G. J. F. Banon. O fator de qualidade foi aprovado pelo Conselho de Editoração e Preservação da Produção Intelectual do INPE em sua reunião do dia 25 de outubro de 2010.
1. Fator de qualidade (FQ)
O FQ pode assumir valores de 0 a 10, ele é independente da quantidade produzida, quando maior é o FQ maior é a qualidade produzida. O FQ é definido por:
FQ = (1 / n) ∑ i = 1, ..., n f(qualis(i)),
onde:
Tabela de conversão f | |
Qualis | Nota |
A1 | 10 |
A2 | 8.6 |
B5 | 7.1 |
B4 | 5.7 |
B3 | 4.3 |
B2 | 2.9 |
B1 | 1.4 |
C | 0 |
Por exemplo, a melhor qualificação do Qualis da CAPES da revista Geophysical Research Letters, com base na tabela Qualis abaixo desta revista, é A1.
Geophysical Research Letters | |
Área | Qualis |
ASTRONOMIA / FÍSICA | B1 |
CIÊNCIAS AGRÁRIAS I | A1 |
ECOLOGIA E MEIO AMBIENTE | A2 |
ENGENHARIAS I | A1 |
ENGENHARIAS II | A2 |
ENGENHARIAS III | A1 |
ENGENHARIAS IV | B1 |
GEOCIÊNCIAS | A1 |
GEOGRAFIA | A1 |
INTERDISCIPLINAR | A1 |
Usando a tabela de conversão f das qualificações do Qualis para decimais, a nota da revista Geophysical Research Letters é f(A1) = 10.
A tabela abaixo fornece, para o ano de 2012, o FQ por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
FQ | $qualisCEA | $qualisCPT | $qualisCST | $qualisCTE | $qualisOBT | $qualisINPE |
artigos avaliados | ${porcentagemQualisCEA}% | ${porcentagemQualisCPT}% | ${porcentagemQualisCST}% | ${porcentagemQualisCTE}% | ${porcentagemQualisOBT}% | ${porcentagemQualisINPE}% |
Os intervalos aparecendo na tabela correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
2. Indicadores de Armazenamento Digital (IAD), Acesso Livre (IAL) e Presença na Web (IPW)
Os três indicadores são expressos em %. Os IAD, IAL e IPW são definidos por:
IAD = 100 * TC / T,
IAL = 100 * TCL / TC,
IPW = 100 * TCL / T,
onde:
Um IAD de 100% significa que todas as obras registradas estão na forma digital.
Um IAL de 100% significa que todas as obras na forma digital estão disponíveis livremente na Web.
Um IAL de 100% significa que todas as obras registradas no repositório estão disponíveis livremente na Web.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
IAD | $CEAIAD% | $CPTIAD% | $CSTIAD% | $CTEIAD% | $OBTIAD% | $INPEIAD% |
IAL | $CEAIAL% | $CPTIAL% | $CSTIAL% | $CTEIAL% | $OBTIAL% | $INPEIAL% |
IPW | $CEAIPW% | $CPTIPW% | $CSTIPW% | $CTEIPW% | $OBTIPW% | $INPEIPW% |
Tabela gerada automaticamente pelo URLibService.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por tipos de referência.
Artigos em periódico | Artigos em evento | Todas | |
IAD | $journalIAD% | $conferenceIAD% | $totalIAD% |
IAL | $journalIAL% | $conferenceIAL% | $totalIAL% |
IPW | $journalIPW% | $conferenceIPW% | $totalIPW% |
Tabela gerada automaticamente pelo URLibService.
Tabelas dos indicadores FQ,IAD, IAL e IPW para o INPE em 2012
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
O fator de qualidade FQ e os três indicadores IAD, IAL e IPW foram propostos por G. J. F. Banon. O fator de qualidade foi aprovado pelo Conselho de Editoração e Preservação da Produção Intelectual do INPE em sua reunião do dia 25 de outubro de 2010.
1. Fator de qualidade (FQ)
O FQ pode assumir valores de 0 a 10, ele é independente da quantidade produzida, quando maior é o FQ maior é a qualidade produzida. O FQ é definido por:
FQ = (1 / n) ∑ i = 1, ..., n f(qualis(i)),
onde:
Tabela de conversão f | |
Qualis | Nota |
A1 | 10 |
A2 | 8.6 |
B5 | 7.1 |
B4 | 5.7 |
B3 | 4.3 |
B2 | 2.9 |
B1 | 1.4 |
C | 0 |
Por exemplo, a melhor qualificação do Qualis da CAPES da revista Geophysical Research Letters, com base na tabela Qualis abaixo desta revista, é A1.
Geophysical Research Letters | |
Área | Qualis |
ASTRONOMIA / FÍSICA | B1 |
CIÊNCIAS AGRÁRIAS I | A1 |
ECOLOGIA E MEIO AMBIENTE | A2 |
ENGENHARIAS I | A1 |
ENGENHARIAS II | A2 |
ENGENHARIAS III | A1 |
ENGENHARIAS IV | B1 |
GEOCIÊNCIAS | A1 |
GEOGRAFIA | A1 |
INTERDISCIPLINAR | A1 |
Usando a tabela de conversão f das qualificações do Qualis para decimais, a nota da revista Geophysical Research Letters é f(A1) = 10.
A tabela abaixo fornece, para o ano de 2012, o FQ por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
FQ | $qualisCEA | $qualisCPT | $qualisCST | $qualisCTE | $qualisOBT | $qualisINPE |
artigos avaliados | ${porcentagemQualisCEA}% | ${porcentagemQualisCPT}% | ${porcentagemQualisCST}% | ${porcentagemQualisCTE}% | ${porcentagemQualisOBT}% | ${porcentagemQualisINPE}% |
Os intervalos aparecendo na tabela correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
2. Indicadores de Armazenamento Digital (IAD), Acesso Livre (IAL) e Presença na Web (IPW)
Os três indicadores são expressos em %. Os IAD, IAL e IPW são definidos por:
IAD = 100 * TC / T,
IAL = 100 * TCL / TC,
IPW = 100 * TCL / T,
onde:
Um IAD de 100% significa que todas as obras registradas estão na forma digital.
Um IAL de 100% significa que todas as obras na forma digital estão disponíveis livremente na Web.
Um IAL de 100% significa que todas as obras registradas no repositório estão disponíveis livremente na Web.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
IAD | $CEAIAD% | $CPTIAD% | $CSTIAD% | $CTEIAD% | $OBTIAD% | $INPEIAD% |
IAL | $CEAIAL% | $CPTIAL% | $CSTIAL% | $CTEIAL% | $OBTIAL% | $INPEIAL% |
IPW | $CEAIPW% | $CPTIPW% | $CSTIPW% | $CTEIPW% | $OBTIPW% | $INPEIPW% |
Tabela gerada automaticamente pelo URLibService.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por tipos de referência.
Artigos em periódico | Artigos em evento | Todas | |
IAD | $journalIAD% | $conferenceIAD% | $totalIAD% |
IAL | $journalIAL% | $conferenceIAL% | $totalIAL% |
IPW | $journalIPW% | $conferenceIPW% | $totalIPW% |
Tabela gerada automaticamente pelo URLibService.
Tabelas dos indicadores FQ,IAD, IAL e IPW para o INPE em 2012
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
O fator de qualidade FQ e os três indicadores IAD, IAL e IPW foram propostos por G. J. F. Banon. O fator de qualidade foi aprovado pelo Conselho de Editoração e Preservação da Produção Intelectual do INPE em sua reunião do dia 25 de outubro de 2010.
1. Fator de qualidade (FQ)
O FQ pode assumir valores de 0 a 10, ele é independente da quantidade produzida, quando maior é o FQ maior é a qualidade produzida. O FQ é definido por:
FQ = (1 / n) ∑ i = 1, ..., n f(qualis(i)),
onde:
Tabela de conversão f | |
Qualis | Nota |
A1 | 10 |
A2 | 8.6 |
B5 | 7.1 |
B4 | 5.7 |
B3 | 4.3 |
B2 | 2.9 |
B1 | 1.4 |
C | 0 |
Por exemplo, a melhor qualificação do Qualis da CAPES da revista Geophysical Research Letters, com base na tabela Qualis abaixo desta revista, é A1.
Geophysical Research Letters | |
Área | Qualis |
ASTRONOMIA / FÍSICA | B1 |
CIÊNCIAS AGRÁRIAS I | A1 |
ECOLOGIA E MEIO AMBIENTE | A2 |
ENGENHARIAS I | A1 |
ENGENHARIAS II | A2 |
ENGENHARIAS III | A1 |
ENGENHARIAS IV | B1 |
GEOCIÊNCIAS | A1 |
GEOGRAFIA | A1 |
INTERDISCIPLINAR | A1 |
Usando a tabela de conversão f das qualificações do Qualis para decimais, a nota da revista Geophysical Research Letters é f(A1) = 10.
A tabela abaixo fornece, para o ano de 2012, o FQ por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
FQ | $qualisCEA | $qualisCPT | $qualisCST | $qualisCTE | $qualisOBT | $qualisINPE |
artigos avaliados | ${porcentagemQualisCEA}% | ${porcentagemQualisCPT}% | ${porcentagemQualisCST}% | ${porcentagemQualisCTE}% | ${porcentagemQualisOBT}% | ${porcentagemQualisINPE}% |
Os intervalos aparecendo na tabela correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
2. Indicadores de Armazenamento Digital (IAD), Acesso Livre (IAL) e Presença na Web (IPW)
Os três indicadores são expressos em %. Os IAD, IAL e IPW são definidos por:
IAD = 100 * TC / T,
IAL = 100 * TCL / TC,
IPW = 100 * TCL / T,
onde:
Um IAD de 100% significa que todas as obras registradas estão na forma digital.
Um IAL de 100% significa que todas as obras na forma digital estão disponíveis livremente na Web.
Um IAL de 100% significa que todas as obras registradas no repositório estão disponíveis livremente na Web.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
IAD | $CEAIAD% | $CPTIAD% | $CSTIAD% | $CTEIAD% | $OBTIAD% | $INPEIAD% |
IAL | $CEAIAL% | $CPTIAL% | $CSTIAL% | $CTEIAL% | $OBTIAL% | $INPEIAL% |
IPW | $CEAIPW% | $CPTIPW% | $CSTIPW% | $CTEIPW% | $OBTIPW% | $INPEIPW% |
Tabela gerada automaticamente pelo URLibService.
A tabela abaixo fornece, para o ano de 2012, os IAD, IAL e IPW por tipos de referência.
Artigos em periódico | Artigos em evento | Todas | |
IAD | $journalIAD% | $conferenceIAD% | $totalIAD% |
IAL | $journalIAL% | $conferenceIAL% | $totalIAL% |
IPW | $journalIPW% | $conferenceIPW% | $totalIPW% |
Tabela gerada automaticamente pelo URLibService.
Tabelas dos indicadores FQ,IAD, IAL e IPW para o INPE em 2013
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
O fator de qualidade FQ e os três indicadores IAD, IAL e IPW foram propostos por G. J. F. Banon. O fator de qualidade foi aprovado pelo Conselho de Editoração e Preservação da Produção Intelectual do INPE em sua reunião do dia 25 de outubro de 2010.
1. Fator de qualidade (FQ)
O FQ pode assumir valores de 0 a 10, ele é independente da quantidade produzida, quando maior é o FQ maior é a qualidade produzida. O FQ é definido por:
FQ = (1 / n) ∑ i = 1, ..., n f(qualis(i)),
onde:
Tabela de conversão f | |
Qualis | Nota |
A1 | 10 |
A2 | 8.6 |
B5 | 7.1 |
B4 | 5.7 |
B3 | 4.3 |
B2 | 2.9 |
B1 | 1.4 |
C | 0 |
Por exemplo, a melhor qualificação do Qualis da CAPES (ano base 2008) da revista Geophysical Research Letters, com base na tabela Qualis abaixo desta revista, é A1.
Geophysical Research Letters | |
Área | Qualis |
ASTRONOMIA / FÍSICA | B1 |
CIÊNCIAS AGRÁRIAS I | A1 |
ECOLOGIA E MEIO AMBIENTE | A2 |
ENGENHARIAS I | A1 |
ENGENHARIAS II | A2 |
ENGENHARIAS III | A1 |
ENGENHARIAS IV | B1 |
GEOCIÊNCIAS | A1 |
GEOGRAFIA | A1 |
INTERDISCIPLINAR | A1 |
Usando a tabela de conversão f das qualificações do Qualis para decimais, a nota da revista Geophysical Research Letters é f(A1) = 10.
A tabela abaixo fornece, para o ano de 2013, o FQ por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
FQ | $qualisCEA | $qualisCPT | $qualisCST | $qualisCTE | $qualisOBT | $qualisINPE |
artigos avaliados | ${porcentagemQualisCEA}% | ${porcentagemQualisCPT}% | ${porcentagemQualisCST}% | ${porcentagemQualisCTE}% | ${porcentagemQualisOBT}% | ${porcentagemQualisINPE}% |
Os intervalos aparecendo na tabela correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
2. Indicadores de Armazenamento Digital (IAD), Acesso Livre (IAL) e Presença na Web (IPW)
Os três indicadores são expressos em %. Os IAD, IAL e IPW são definidos por:
IAD = 100 * TC / T,
IAL = 100 * TCL / TC,
IPW = 100 * TCL / T,
onde:
Um IAD de 100% significa que todas as obras registradas estão na forma digital.
Um IAL de 100% significa que todas as obras na forma digital estão disponíveis livremente na Web.
Um IAL de 100% significa que todas as obras registradas no repositório estão disponíveis livremente na Web.
A tabela abaixo fornece, para o ano de 2013, os IAD, IAL e IPW por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
IAD | $CEAIAD% | $CPTIAD% | $CSTIAD% | $CTEIAD% | $OBTIAD% | $INPEIAD% |
IAL | $CEAIAL% | $CPTIAL% | $CSTIAL% | $CTEIAL% | $OBTIAL% | $INPEIAL% |
IPW | $CEAIPW% | $CPTIPW% | $CSTIPW% | $CTEIPW% | $OBTIPW% | $INPEIPW% |
Tabela gerada automaticamente pelo URLibService.
A tabela abaixo fornece, para o ano de 2013, os IAD, IAL e IPW por tipos de referência.
Artigos em periódico | Artigos em evento | Todas | |
IAD | $journalIAD% | $conferenceIAD% | $totalIAD% |
IAL | $journalIAL% | $conferenceIAL% | $totalIAL% |
IPW | $journalIPW% | $conferenceIPW% | $totalIPW% |
Tabela gerada automaticamente pelo URLibService.
Tabelas dos indicadores FQ,IAD, IAL e IPW para o INPE em 2013
Última atualização: [clock format [clock second] -format "%d/%m/%y %H:%M"]
O fator de qualidade FQ e os três indicadores IAD, IAL e IPW foram propostos por G. J. F. Banon. O fator de qualidade foi aprovado pelo Conselho de Editoração e Preservação da Produção Intelectual do INPE em sua reunião do dia 25 de outubro de 2010.
1. Fator de qualidade (FQ)
O FQ pode assumir valores de 0 a 10, ele é independente da quantidade produzida, quando maior é o FQ maior é a qualidade produzida. O FQ é definido por:
FQ = (1 / n) ∑ i = 1, ..., n f(qualis(i)),
onde:
Tabela de conversão f | |
Qualis | Nota |
A1 | 10 |
A2 | 8.6 |
B5 | 7.1 |
B4 | 5.7 |
B3 | 4.3 |
B2 | 2.9 |
B1 | 1.4 |
C | 0 |
Por exemplo, a melhor qualificação do Qualis da CAPES (ano base 2008) da revista Geophysical Research Letters, com base na tabela Qualis abaixo desta revista, é A1.
Geophysical Research Letters | |
Área | Qualis |
ASTRONOMIA / FÍSICA | B1 |
CIÊNCIAS AGRÁRIAS I | A1 |
ECOLOGIA E MEIO AMBIENTE | A2 |
ENGENHARIAS I | A1 |
ENGENHARIAS II | A2 |
ENGENHARIAS III | A1 |
ENGENHARIAS IV | B1 |
GEOCIÊNCIAS | A1 |
GEOGRAFIA | A1 |
INTERDISCIPLINAR | A1 |
Usando a tabela de conversão f das qualificações do Qualis para decimais, a nota da revista Geophysical Research Letters é f(A1) = 10.
A tabela abaixo fornece, para o ano de 2013, o FQ por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
FQ | $qualisCEA | $qualisCPT | $qualisCST | $qualisCTE | $qualisOBT | $qualisINPE |
artigos avaliados | ${porcentagemQualisCEA}% | ${porcentagemQualisCPT}% | ${porcentagemQualisCST}% | ${porcentagemQualisCTE}% | ${porcentagemQualisOBT}% | ${porcentagemQualisINPE}% |
Os intervalos aparecendo na tabela correspondem a um coeficiente de confiança de 95% (caso a distribuição fosse considerada normal).
Tabela gerada automaticamente pelo URLibService.
2. Indicadores de Armazenamento Digital (IAD), Acesso Livre (IAL) e Presença na Web (IPW)
Os três indicadores são expressos em %. Os IAD, IAL e IPW são definidos por:
IAD = 100 * TC / T,
IAL = 100 * TCL / TC,
IPW = 100 * TCL / T,
onde:
Um IAD de 100% significa que todas as obras registradas estão na forma digital.
Um IAL de 100% significa que todas as obras na forma digital estão disponíveis livremente na Web.
Um IAL de 100% significa que todas as obras registradas no repositório estão disponíveis livremente na Web.
A tabela abaixo fornece, para o ano de 2013, os IAD, IAL e IPW por coordenadorias e para o INPE.
CEA | CPT | CST | CTE | OBT | INPE | |
IAD | $CEAIAD% | $CPTIAD% | $CSTIAD% | $CTEIAD% | $OBTIAD% | $INPEIAD% |
IAL | $CEAIAL% | $CPTIAL% | $CSTIAL% | $CTEIAL% | $OBTIAL% | $INPEIAL% |
IPW | $CEAIPW% | $CPTIPW% | $CSTIPW% | $CTEIPW% | $OBTIPW% | $INPEIPW% |
Tabela gerada automaticamente pelo URLibService.
A tabela abaixo fornece, para o ano de 2013, os IAD, IAL e IPW por tipos de referência.
Artigos em periódico | Artigos em evento | Todas | |
IAD | $journalIAD% | $conferenceIAD% | $totalIAD% |
IAL | $journalIAL% | $conferenceIAL% | $totalIAL% |
IPW | $journalIPW% | $conferenceIPW% | $totalIPW% |
Tabela gerada automaticamente pelo URLibService.