1. Identificação | |
Tipo de Referência | Artigo em Revista Científica (Journal Article) |
Site | mtc-m21d.sid.inpe.br |
Código do Detentor | isadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S |
Identificador | 8JMKD3MGP3W34T/46L48RH |
Repositório | sid.inpe.br/mtc-m21d/2022/04.04.14.22 (acesso restrito) |
Última Atualização | 2022:06.20.12.06.56 (UTC) administrator |
Repositório de Metadados | sid.inpe.br/mtc-m21d/2022/04.04.14.22.51 |
Última Atualização dos Metadados | 2023:01.03.16.46.04 (UTC) administrator |
DOI | 10.1002/app.51946 |
ISSN | 0021-8995 1097-4628 |
Chave de Citação | AnjosBRECMAP:2022:InBlPr |
Título | Influence of blending protocol on the mechanical, rheological, and electromagnetic properties of PC/ABS/ABS-g-MAH blend-based MWCNT nanocomposites ![](http://mtc-m21d.sid.inpe.br/col/dpi.inpe.br/banon/2000/01.23.20.24/doc/externalLink.gif) |
Ano | 2022 |
Mês | Apr. |
Data de Acesso | 30 jun. 2024 |
Tipo de Trabalho | journal article |
Tipo Secundário | PRE PI |
Número de Arquivos | 1 |
Tamanho | 3029 KiB |
|
2. Contextualização | |
Autor | 1 Anjos, Erick Gabriel Ribeiro dos 2 Braga, Natália Ferreira 3 Ribeiro, Bruno 4 Escanio, Camila Alves 5 Cardoso, Andreza de Moura 6 Marini, Juliano 7 Antonelli, Eduardo 8 Passador, Fábo Roberto |
Grupo | 1 2 3 4 CMS-ETES-DIPGR-INPE-MCTI-GOV-BR |
Afiliação | 1 Universidade Federal de São Paulo (UNIFESP) 2 Universidade Federal de São Paulo (UNIFESP) 3 Universidade Federal de São Paulo (UNIFESP) 4 Instituto Nacional de Pesquisas Espaciais (INPE) 5 Instituto de Aeronáutica e Espaço (IAE) 6 Universidade Federal de São Carlos (UFSCar) 7 Universidade Federal de São Paulo (UNIFESP) 8 Universidade Federal de São Paulo (UNIFESP) |
Endereço de e-Mail do Autor | 1 2 3 4 camilaescanio@gmail.com |
Revista | Journal of Applied Polymer Science |
Volume | 139 |
Número | 15 |
Páginas | e51946 |
Nota Secundária | A1_ENGENHARIAS_II A2_INTERDISCIPLINAR B1_GEOCIÊNCIAS B1_ENGENHARIAS_IV B1_ENGENHARIAS_III B1_ENGENHARIAS_I B1_CIÊNCIAS_AGRÁRIAS_I B1_CIÊNCIA_DE_ALIMENTOS B2_ODONTOLOGIA B2_NUTRIÇÃO B2_MEDICINA_II B2_MEDICINA_I B2_FARMÁCIA B2_CIÊNCIAS_AMBIENTAIS B3_QUÍMICA B3_MATERIAIS B3_CIÊNCIAS_BIOLÓGICAS_II B3_CIÊNCIAS_BIOLÓGICAS_I B3_ASTRONOMIA_/_FÍSICA |
Histórico (UTC) | 2022-04-04 14:22:51 :: simone -> administrator :: 2022-04-04 14:22:52 :: administrator -> simone :: 2022 2022-04-04 14:23:52 :: simone -> administrator :: 2022 2022-04-08 21:44:56 :: administrator -> simone :: 2022 2022-06-20 12:06:57 :: simone -> administrator :: 2022 2023-01-03 16:46:04 :: administrator -> simone :: 2022 |
|
3. Conteúdo e estrutura | |
É a matriz ou uma cópia? | é a matriz |
Estágio do Conteúdo | concluido |
Transferível | 1 |
Tipo do Conteúdo | External Contribution |
Tipo de Versão | publisher |
Resumo | Polycarbonate (PC)/acrylonitrile-butadiene-styrene copolymer (ABS) blend-based multi-wall carbon nanotubes (MWCNT) nanocomposites is an attractive alternative for the manufacture of electronics housing as it can have the mechanical and electromagnetic properties required for this application. The preferred location of MWCNT in PC/ABS blend is an important parameter to obtain better mechanical and electromagnetic properties. In this way, three different blending protocols (BP) were used to obtain PC/ABS/maleic anhydride-grafted ABS (ABS-g-MAH) (85/10/5) blend-based MWCNT nanocomposites with the addition of 0.5 and 1 wt% of MWCNT in a twin-screw extruder. Specimens were evaluated by thermal (thermogravimetric analysisTGA and differential scanning calorimetryDSC), mechanical (Izod impact strength and tensile tests), dynamic mechanical analysis (DMA), electrical, and rheological properties, which were correlated with the nanocomposites morphology evaluated by high-resolution scanning electron microscopy. The BP associated with the addition of a compatibilizer agent influenced the MWCNT distribution and location in the polymeric matrix. The one-step extrusion process results in MWCNT mostly at the interface of the PC/ABS blend and agglomerates, leading to lower mechanical and thermal properties. The BP in which a PC/MWCNT masterbatch was first prepared and then diluted in ABS and ABS-g-MAH achieves the higher mechanical properties, increasing Young's modulus and the ultimate tensile strength. The third BP in which MWCNT was added in a second step in the blend already processed resulted in a homogeneous dispersion of MWCNT on both phases and a lower electrical resistivity. |
Área | FISMAT |
Arranjo 1 | urlib.net > BDMCI > Fonds > Produção pgr ATUAIS > CMS > Influence of blending... |
Arranjo 2 | urlib.net > BDMCI > Fonds > Produção a partir de 2021 > CGCE > Influence of blending... |
Arranjo 3 | urlib.net > BDMCI > Fonds > Produção a partir de 2021 > CGIP > Influence of blending... |
Conteúdo da Pasta doc | acessar |
Conteúdo da Pasta source | não têm arquivos |
Conteúdo da Pasta agreement | |
|
4. Condições de acesso e uso | |
Idioma | en |
Arquivo Alvo | J of Applied Polymer Sci - 2021 - Anjos - Influence of blending protocol on the mechanical rheological and (1).pdf |
Grupo de Usuários | simone |
Grupo de Leitores | administrator simone |
Visibilidade | shown |
Política de Arquivamento | denypublisher denyfinaldraft |
Permissão de Leitura | deny from all and allow from 150.163 |
Permissão de Atualização | não transferida |
|
5. Fontes relacionadas | |
Unidades Imediatamente Superiores | 8JMKD3MGPCW/3F358GL 8JMKD3MGPCW/46KTFK8 8JMKD3MGPCW/46KUES5 |
Lista de Itens Citando | sid.inpe.br/bibdigital/2013/10.14.21.39 8 sid.inpe.br/bibdigital/2022/04.03.23.11 6 sid.inpe.br/bibdigital/2022/04.03.17.52 2 |
Divulgação | WEBSCI; PORTALCAPES; COMPENDEX. |
Acervo Hospedeiro | urlib.net/www/2021/06.04.03.40 |
|
6. Notas | |
Campos Vazios | alternatejournal archivist callnumber copyholder copyright creatorhistory descriptionlevel e-mailaddress format isbn keywords label lineage mark mirrorrepository nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress project resumeid rightsholder schedulinginformation secondarydate secondarykey session shorttitle sponsor subject tertiarymark tertiarytype url |
|
7. Controle da descrição | |
e-Mail (login) | simone |
atualizar | |
|