@Article{VernasquiSaRoLaFeRo:2024:NeDiCo,
author = "Vernasqui, La{\'{\i}}s Gimenes and Santos, G{\'e}ssica O. S.
and Rodr{\'{\i}}guez-G{\'o}mez, Alberto and Lanza, Marcos R. V.
and Ferreira, Neiden{\^e}i Gomes and Rodrigo, Manuel A.",
affiliation = "{Instituto Nacional de Pesquisas Espaciais (INPE)} and {University
of Castilla La Mancha} and {University of Castilla La Mancha} and
{Universidade de S{\~a}o Paulo (USP)} and {Instituto Nacional de
Pesquisas Espaciais (INPE)} and {University of Castilla La
Mancha}",
title = "New diamond coatings for peroxosulphate production",
journal = "Journal of Electroanalytical Chemistry",
year = "2024",
volume = "954",
pages = "e118021",
month = "Feb.",
keywords = "Caro's acid, Diamond electrodes, Electrolysis, Peroxosulphate.",
abstract = "In this work new diamonds coating, named as nanocrystalline
diamond (ND) and ultrananocrystalline diamond (UND) are evaluated
for the production of peroxospecies derived from the electrolysis
of sulphuric acid and their performance is compared to that of a
commercial diamond coating widely used in the literature and
well-known by its outstanding performance. The oxidant production
was tested at two different current densities and significant
differences were found in oxidant production between the
electrodes applied in the different conditions studied. Results
demonstrate that when the lowest current is applied (25 mA
cm\−2), the ND and UND electrodes are more efficient in the
persulfate formation. For ND electrode, this behavior can be
explained in terms of the promoted hydroxyl radical formation at
these conditions. However, the UND electrode presented different
behavior: the lesser hydroxyl formation and highest peroxospecies
formation. This behavior may be attributed to the sum of two
factors: the high sp2 content in the diamond film and its
porosity, that can increase the sulphate adsorption at the surface
that, in turn, facilitates the persulfate generation. This
behavior can be proved by the Tafel plots and are explained by the
electrode's features discussed by Raman spectra. When the
operation current is increased to harsher conditions (300 mA
cm\−2), the commercial electrode increases importantly the
production of the studied oxidant. One more time it can be
attributed to the hydroxyl radical generation at this condition.
Considering the energy consumption and the process efficiency, it
can be concluded that the UND electrode is more attractive for
this application in the studied conditions.",
doi = "10.1016/j.jelechem.2023.118021",
url = "http://dx.doi.org/10.1016/j.jelechem.2023.118021",
issn = "0022-0728",
language = "en",
targetfile = "1-s2.0-S1572665723008858-main.pdf",
urlaccessdate = "06 maio 2024"
}