Resultado da Pesquisa
A expressão de busca foi <secondaryty ci and firstg lit and y 2007 and not isb * and ref conference>.
5 referências encontradas buscando em 17 dentre 17 Arquivos.
Data e hora local de busca: 26/04/2024 16:12.
1. Identificação
Tipo de ReferênciaArtigo em Evento (Conference Proceedings)
Sitemtc-m16c.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Repositóriosid.inpe.br/mtc-m18@80/2008/07.16.13.59
Última Atualização2008:07.16.14.00.44 (UTC) administrator
Repositório de Metadadossid.inpe.br/mtc-m18@80/2008/07.16.13.59.24
Última Atualização dos Metadados2021:02.03.17.56.35 (UTC) administrator
Chave SecundáriaINPE--PRE/
Chave de CitaçãoAraujoCoel:2007:FuMoOp
TítuloFuzzy Model Optimization based on Nelder-Mead Simplex Method applied to Identification of a Chaotic System/Otimização de Modelo Difusos (Fuzzy) baseado no Método Simplex Nelder-Mead aplicado na Identificação de Sistemas Caóticos
Ano2007
Data de Acesso26 abr. 2024
Tipo SecundárioPRE CI
Número de Arquivos1
Tamanho223 KiB
2. Contextualização
Autor1 Araujo, José Enersto de
2 Coelho, Leandro dos Santos
Grupo1 LIT-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2 Industrial and Systems Engineering Graduate Program, PPGE
Nome do EventoCongresso Brasileiro de Engenharia Mecânica (COBEM)/ International Congress of Mechanical Engineering.
Localização do EventoBrasília
Data5-9 nov. 2007
Título do LivroProceedings
Histórico (UTC)2008-07-16 14:02:24 :: marciana -> administrator ::
2021-02-03 17:56:35 :: administrator -> marciana :: 2007
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Palavras-ChaveNelder-Mead Simplex
Takagi-Sugeno (T-S) Fuzzy model
Least Mean Square
Optimization
Nonlinear identification
ResumoNelder-Mead simplex method in conjunction with Takagi-Sugeno (T-S) fuzzy model are employed to nonlinear identification of a chaotic system in this paper. Techniques such as Takagi-Sugeno fuzzy modeling have been employed in many applications due the difficulties found out during the identification task of nonlinear systems. The premise part of production rules is optimized here by using the Nelder-Mead simplex method. In turn, least mean squares technique is applied to the consequent part of a T-S fuzzy model. Experimental application using data supplied by chaotic system called Chuas circuit is analyzed. According to numerical results the Least Mean Square technique and Nelder-Mead simplex method succeeded in constructing a T-S fuzzy model for a nonlinear identification in this particular application. Resumo: O metodo simplex Nelder-Mead em conjuncao com o modelo difuso sao empregados para a identificacao nao-linear de sistemas caoticos neste artigo. Tecnicas tais como modelagem difusa Takagi-Sugeno tem sido empregadas em muitas aplicacoes devido a dificuldades encontradas durante a tarefa de identificacao de sistemas nao-lineares. A parte premissa das regras de producao é otimizada aqui empregando-se o metodo simplex Nelder-Mead. Por sua vez, a tecnica de minimos quadrados é aplicada para determinar a parte consequente do modelo difuso T-S. Aplicacao experimental usando dados fornecidos por um sistema caotico chamado circuito de Chua é analizado. De acordo com resultados numericos a tecnica de minimos quadrados e o metodo simplex Nelder-Mead obtiveram sucesso na construcao do modelo difuso T-S para a identificacao nao-linear nesta aplicacao, em particular.
ÁreaETES
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > COLIT > Fuzzy Model Optimization...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
URL dos dadoshttp://urlib.net/ibi/sid.inpe.br/mtc-m18@80/2008/07.16.13.59
URL dos dados zipadoshttp://urlib.net/zip/sid.inpe.br/mtc-m18@80/2008/07.16.13.59
Arquivo AlvoCoelho-Araujo55_COBEM-07_Fz-NMO_pdf.pdf
Grupo de Usuáriosadministrator
marciana
administrator
Visibilidadeshown
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/444BQ9E
Acervo Hospedeirosid.inpe.br/mtc-m18@80/2008/03.17.15.17
6. Notas
Campos Vaziosarchivingpolicy archivist callnumber copyholder copyright creatorhistory descriptionlevel dissemination documentstage doi e-mailaddress edition editor electronicmailaddress format identifier isbn issn label language lineage mark mirrorrepository nextedition notes numberofvolumes orcid organization pages parameterlist parentrepositories previousedition previouslowerunit progress project publisher publisheraddress readergroup readpermission resumeid rightsholder schedulinginformation secondarydate secondarymark serieseditor session shorttitle sponsor subject tertiarymark tertiarytype type url versiontype volume
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Evento (Conference Proceedings)
Sitemtc-m16b.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Repositóriodpi.inpe.br/ce@80/2007/01.15.11.43   (acesso restrito)
Última Atualização2007:04.09.20.23.28 (UTC) administrator
Repositório de Metadadosdpi.inpe.br/ce@80/2007/01.15.11.43.12
Última Atualização dos Metadados2021:02.03.17.57.14 (UTC) administrator
Chave SecundáriaINPE--PRE/
Chave de CitaçãoGonçalvesLourTrab:2007:PoPlIm
TítuloPostponement planning and implementation from CE perspective
FormatoCD-ROM; On-line.
Ano2007
Data de Acesso26 abr. 2024
Tipo SecundárioPRE CI
Número de Arquivos3
Tamanho996 KiB
2. Contextualização
Autor1 Gonçalves, Cassio Dias
2 Loureiro, Geilson
3 Trabasso, Luís Gonzaga
Identificador de Curriculo1
2 8JMKD3MGP5W/3C9JH57
Grupo1
2 LIT-INPE-MCT-BR
Afiliação1 Aeronautics Institute of Technology (ITA)
2 Brazilian Institute for Space Research (INPE)
3 Aeronautics Institute of Technology (ITA)
Endereço de e-Mail do Autor1 cdgoncal@yahoo.com.br
2 geilson@lit.inpe.br
3 gonzaga@ita.br
EditorLoureiro, Geilson
Curran, Ricky
Endereço de e-Mailcdgoncal@yahoo.com.br
Nome do EventoISPE International Conference on Concurrent Engineering, 14 (CE 2007).
Localização do EventoSão José dos Campos
Data2007, July 16-20
Editora (Publisher)Instituto Nacional de Pesquisas Espaciais (INPE)
Cidade da EditoraSão José dos Campos
Páginas291-298
Título do LivroProceedings
OrganizaçãoInstituto Nacional de Pesquisas Espaciais (INPE)
Histórico (UTC)2007-03-20 13:20:30 :: cdgoncal@yahoo.com.br -> ce2007 ::
2007-03-29 12:42:18 :: ce2007 -> cdgoncal@yahoo.com.br ::
2007-04-03 19:35:44 :: cdgoncal@yahoo.com.br -> ce2007 ::
2007-04-05 19:50:58 :: ce2007 -> cdgoncal@yahoo.com.br ::
2007-04-09 20:24:38 :: cdgoncal@yahoo.com.br -> ce2007 ::
2007-04-12 21:44:23 :: ce2007 -> administrator ::
2007-05-18 15:21:37 :: administrator -> ce2007 ::
2007-05-21 19:34:45 :: ce2007 -> administrator ::
2007-12-04 15:45:45 :: administrator -> cdgoncal@yahoo.com.br ::
2007-12-04 19:49:56 :: cdgoncal@yahoo.com.br -> marciana ::
2007-12-06 12:01:22 :: marciana -> administrator ::
2021-02-03 17:57:14 :: administrator -> marciana :: 2007
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Palavras-ChavePostponement
Concurrent Engineering
Competitiveness
ResumoNowadays manufacturing companies are facing the challenge of attending most specific customer desires and even so, to offer short delivery times and low price. Companies must have flexibility to customize products in a rapid way. A product customization strategy, named Postponement, has been adopted by a growing number of companies to address these products differentiation requirements, demanded by the new global market. This paper aims to review the available literature about the postponement strategy, comparing the several approaches from different authors, to observe how the postponement is described in terms of its benefits, implementation barriers, factors that enable or make difficult its practice, the relationship with other theories and techniques, the tools used to support the postponements planning and implementation. Through this review, it is intended to identify the contribution given by a proposed method to plan and implement the postponement strategy in an aerospace company, from the concurrent engineering perspective.
ÁreaETES
TipoCollaborative concurrent engineering methodologies, methods and tools
ArranjoPostponement planning and...
Conteúdo da Pasta docacessar
Conteúdo da Pasta source
Postponement_planning_and_implementation_from_CE_perspective.doc 20/03/2007 10:17 324.0 KiB 
Postponement_planning_and_implementation_from_CE_perspecti….pdf 20/03/2007 10:17 159.6 KiB 
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvopaper.pdf
Grupo de Usuáriosadministrator
cdgoncal@yahoo.com.br
marciana
Visibilidadeshown
Permissão de Leituradeny from all and allow from 150.163
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/444BQ9E
Acervo Hospedeirolcp.inpe.br/ignes/2004/02.12.18.39
cptec.inpe.br/walmeida/2003/04.25.17.12
6. Notas
Nota1
Campos Vaziosarchivingpolicy archivist callnumber contenttype copyholder copyright creatorhistory descriptionlevel dissemination documentstage doi edition identifier isbn issn label lineage mirrorrepository nextedition notes numberofvolumes orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup rightsholder schedulinginformation secondarydate secondarymark serieseditor shorttitle sponsor tertiarymark tertiarytype url versiontype volume
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Evento (Conference Proceedings)
Sitemtc-m16b.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Repositóriodpi.inpe.br/ce@80/2007/01.16.17.27   (acesso restrito)
Última Atualização2007:04.10.17.14.52 (UTC) administrator
Repositório de Metadadosdpi.inpe.br/ce@80/2007/01.16.17.27.41
Última Atualização dos Metadados2021:02.03.17.57.14 (UTC) administrator
Chave SecundáriaINPE--PRE/
Chave de CitaçãoPessôaLourAlve:2007:ApLePr
TítuloAn approach to lean product development planning
FormatoCD-ROM; On-line.
Ano2007
Data de Acesso26 abr. 2024
Tipo SecundárioPRE CI
Número de Arquivos3
Tamanho567 KiB
2. Contextualização
Autor1 Pessôa, Marcus Vinicius Pereira
2 Loureiro, Geilson
3 Alves, João Murta
Identificador de Curriculo1
2 8JMKD3MGP5W/3C9JH57
Grupo1
2 LIT-INPE-MCT-BR
Afiliação1 Departamento de Controle do Espaço Aéreo - DECEA
2 Instituto Nacional de Pesquisas Espaciais - INPE
3 Instituto Tecnológico de Aeronáutica
Endereço de e-Mail do Autor1 mvppessoa@gmail.com
2 geilson@lit.inpe.br
3 murta@ita.br
EditorLoureiro, Geilson
Curran, Ricky
Endereço de e-Mailmvppessoa@gmail.com
Nome do EventoISPE International Conference on Concurrent Engineering, 14 (CE 2007).
Localização do EventoSão José dos Campos
Data2007, July 16-20
Editora (Publisher)Instituto Nacional de Pesquisas Espaciais (INPE)
Cidade da EditoraSão José dos Campos
Páginas223-231
Título do LivroProceedings
OrganizaçãoInstituto Nacional de Pesquisas Espaciais (INPE)
Histórico (UTC)2007-03-07 15:19:20 :: mvppessoa@gmail.com -> ce2007 ::
2007-03-29 12:42:14 :: ce2007 -> mvppessoa@gmail.com ::
2007-04-10 18:24:53 :: mvppessoa@gmail.com -> ce2007 ::
2007-04-12 21:44:13 :: ce2007 -> administrator ::
2007-05-18 15:21:20 :: administrator -> ce2007 ::
2007-05-21 19:34:36 :: ce2007 -> administrator ::
2007-12-04 15:45:55 :: administrator -> mvppessoa@gmail.com ::
2007-12-04 19:49:57 :: mvppessoa@gmail.com -> marciana ::
2007-12-06 12:02:00 :: marciana -> administrator ::
2021-02-03 17:57:14 :: administrator -> marciana :: 2007
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Palavras-Chavedevelopment planning
product development
lean philosophy
ResumoA product development system (PDS) is based on two pillars: "do the thing right" and "do the right thing". While the former leads to operational efficiency and waste reduction, the latter guarantees the fulfillment of all stakeholders needs. On this context, Toyota's PDS has a superior performance. The lack of formalization of the Toyota PDS system, though, makes it difficult to replicate. Research on this system has resulted in the identification of several principles, tools and techniques, but did not present a way to make them systematic. This paper aims to propose and demonstrate a systematic way to make the lean engineering products development planning. The method allows the creation of an activity network, which provides at the same time value creation and waste reduction. To achieve this objective the method is divided into four processes: (1) Value determination: having the product vision as an input, this process defines the Value Breakdown Structure VBS. The VBS differs from the usual WBS, where the latter decompose the work, to make major project deliverables or perform project phases, into smaller and more manageable chunks, and the former deploys the stakeholders' value into unequivocal and verifiable parameters, called value items. (2) Set-based Concurrent Engineering SBCE prioritization: determines the most critical product modules or organizational processes, which will be developed through a set of alternatives. During SBCE, the development team does not establish an early system level design, but instead establishes sets of possibilities for each subsystem or process, many of which are carried far into the product and process design. (3) Pull events determination: No process along the value flow should produce an item, part, service or information without direct request from the following processes. The pull events arte associated to physical progress evidences (i.e., models, prototypes, start of production, etc.) and are important moments to knowledge capture. Differently from tall gates where information batches are created, pull events guarantee the value flow, make quality problems visible and create knowledge. (4) Value creation activities sequencing: the activities to be performed are defined and sequenced based on the pull events. This work consists of three parts: (1) the identification of the needs to the lean development planning; (2) the method conception; and (4) the method evaluation against the identified needs and improvement opportunities observed on an aerospace product development example. Conclusions are that the developed method: (1) fits the product development environment; (2) adheres to the lean principles; (3) faces the traditional planning deficiencies; (4) exploits the improvement opportunities from the studied example.
ÁreaETES
TipoConcurrent innovative product engineering
ArranjoAn approach to...
Conteúdo da Pasta docacessar
Conteúdo da Pasta source
paper.doc 21/02/2007 11:09 1.1 MiB
paper.pdf 07/03/2007 12:16 179.0 KiB 
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvopaper.pdf
Grupo de Usuáriosadministrator
marciana
mvppessoa@gmail.com
Visibilidadeshown
Permissão de Leituradeny from all and allow from 150.163
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/444BQ9E
Acervo Hospedeirolcp.inpe.br/ignes/2004/02.12.18.39
cptec.inpe.br/walmeida/2003/04.25.17.12
6. Notas
Nota1
Campos Vaziosarchivingpolicy archivist callnumber contenttype copyholder copyright creatorhistory descriptionlevel dissemination documentstage doi edition identifier isbn issn label lineage mirrorrepository nextedition notes numberofvolumes orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup rightsholder schedulinginformation secondarydate secondarymark serieseditor shorttitle sponsor tertiarymark tertiarytype url versiontype volume
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Evento (Conference Proceedings)
Sitemtc-m16b.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Repositóriodpi.inpe.br/ce@80/2007/04.15.01.43   (acesso restrito)
Última Atualização2007:04.15.01.32.14 (UTC) administrator
Repositório de Metadadosdpi.inpe.br/ce@80/2007/04.15.01.43.08
Última Atualização dos Metadados2021:02.03.17.57.15 (UTC) administrator
Chave SecundáriaINPE--PRE/
Chave de CitaçãoSimonPinhLour:2007:ToAuSy
TítuloTowards Automatic Systems Architecting
FormatoCD-ROM; On-line.
Ano2007
Data de Acesso26 abr. 2024
Tipo SecundárioPRE CI
Número de Arquivos4
Tamanho2774 KiB
2. Contextualização
Autor1 Simon, Felipe
2 Pinheiro, Gustavo
3 Loureiro, Geilson
Identificador de Curriculo1
2
3 8JMKD3MGP5W/3C9JH57
Grupo1
2
3 LIT-INPE-MCT-BR
Afiliação1 Department of Computer Engineering, Aeronautics Institute of Technology, Brazil
2 Department of Computer Engineering, Aeronautics Institute of Technology, Brazil
3 Laboratory of Integration and Testing (LIT), Brazilian Institute for Space Reasearch (INPE), Brazil
Endereço de e-Mail do Autor1 felipeeng08@gmail.com
2 gusta.pinheiro@gmail.com
3 geilson@lit.inpe.br
EditorLoureiro, Geilson
Curran, Ricky
Endereço de e-Mailgusta.pinheiro@gmail.com
Nome do EventoISPE International Conference on Concurrent Engineering, 14 (CE 2007).
Localização do EventoSão José dos Campos
Data2007, July 16-20
Editora (Publisher)Instituto Nacional de Pesquisas Espaciais (INPE)
Cidade da EditoraSão José dos Campos
Páginas113-126
Título do LivroProceedings
OrganizaçãoInstituto Nacional de Pesquisas Espaciais (INPE)
Histórico (UTC)2007-04-15 01:51:59 :: gusta.pinheiro@gmail.com -> administrator ::
2007-04-26 22:10:17 :: administrator -> ce2007 ::
2007-04-27 14:57:47 :: ce2007 -> administrator ::
2007-05-18 15:20:54 :: administrator -> ce2007 ::
2007-05-21 14:35:52 :: ce2007 -> administrator ::
2007-12-04 19:47:27 :: administrator -> marciana ::
2007-12-06 12:03:33 :: marciana -> administrator ::
2021-02-03 17:57:15 :: administrator -> marciana :: 2007
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Palavras-ChaveComplex Engineering
meta-language
OPN
ResumoThis article intends to shed new light on the system design process. We here suggest the possibility of combining simulation features of an executable meta-language called Object-Process Network (OPN) with the descriptive power of well-known modeling languages such as Object-Process Methodology (OPM), Structured Analysis (SA) or SysML. In the Systems Architecture domain, a great issue one always faces is the great number of options to be considered when designing a system. We must keep in mind that modeling the space of options is actually different from modeling the system of interest. The traditional modeling tools allow us to specify a unique solution, when we should consider the whole set of feasible architectures. On the other hand, OPN is able to help architects to assess all these possible configurations but, as a decision-support tool, it doesnt offer the descriptive power OPM, SA and SysML do.
ÁreaETES
TipoSystems Architecting
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > COLIT > Towards Automatic Systems...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvopaper/paper.pdf
Grupo de Usuáriosadministrator
gusta.pinheiro@gmail.com
marciana
Visibilidadeshown
Permissão de Leituradeny from all and allow from 150.163
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/444BQ9E
Acervo Hospedeirolcp.inpe.br/ignes/2004/02.12.18.39
cptec.inpe.br/walmeida/2003/04.25.17.12
6. Notas
Nota1
Campos Vaziosarchivingpolicy archivist callnumber contenttype copyholder copyright creatorhistory descriptionlevel dissemination documentstage doi edition identifier isbn issn label lineage mirrorrepository nextedition notes numberofvolumes orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup rightsholder schedulinginformation secondarydate secondarymark serieseditor shorttitle sponsor tertiarymark tertiarytype url versiontype volume
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Evento (Conference Proceedings)
Sitemtc-m16b.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Repositóriodpi.inpe.br/ce@80/2007/01.22.18.46   (acesso restrito)
Última Atualização2007:04.09.20.17.58 (UTC) administrator
Repositório de Metadadosdpi.inpe.br/ce@80/2007/01.22.18.46.33
Última Atualização dos Metadados2021:02.03.17.57.14 (UTC) administrator
Chave SecundáriaINPE--PRE/
Chave de CitaçãoZenunLourAraú:2007:EfTeCo
TítuloThe Effects of Teams' Co-location on Project Performance
FormatoCD-ROM; On-line.
Ano2007
Data de Acesso26 abr. 2024
Tipo SecundárioPRE CI
Número de Arquivos5
Tamanho2570 KiB
2. Contextualização
Autor1 Zenun, Marina Mendonça Natalino
2 Loureiro, Geilson
3 Araújo, Claudiano Sales
Identificador de Curriculo1
2 8JMKD3MGP5W/3C9JH57
Grupo1
2 LIT-INPE-MCT-BR
Afiliação1 Instituto Tecnológico de Aeronáutica - ITA
2 Instituto Tecnológico de Aeronáutica - ITA
3 Embraer S.A.
Endereço de e-Mail do Autor1 marina.natalino@embraer.com.br
2 geilson@lit.inpe.br
3 claudiano@embraer.com.br
EditorLoureiro, Geilson
Curran, Ricky
Endereço de e-Mailmarina.natalino@embraer.com.br
Nome do EventoISPE International Conference on Concurrent Engineering, 14 (CE 2007).
Localização do EventoSão José dos Campos
Data2007, July 16-20
Editora (Publisher)Instituto Nacional de Pesquisas Espaciais (INPE)
Cidade da EditoraSão José dos Campos
Páginas700-710
Título do LivroProceedings
OrganizaçãoInstituto Nacional de Pesquisas Espaciais (INPE)
Histórico (UTC)2007-03-05 19:52:41 :: marina.natalino@embraer.com.br -> ce2007 ::
2007-03-29 12:42:15 :: ce2007 -> marina.natalino@embraer.com.br ::
2007-04-09 22:11:35 :: marina.natalino@embraer.com.br -> ce2007 ::
2007-04-12 21:44:17 :: ce2007 -> administrator ::
2007-05-18 15:23:13 :: administrator -> ce2007 ::
2007-05-21 19:34:39 :: ce2007 -> administrator ::
2007-12-04 19:49:58 :: administrator -> marciana ::
2007-12-06 12:04:02 :: marciana -> administrator ::
2021-02-03 17:57:14 :: administrator -> marciana :: 2007
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Palavras-Chaveco-location
teams
project success
ResumoThis paper aims to present the result of a study at a major aerospace company about project contextual characteristics and their impact on project organization (e.g. team collocation). In this time of globalization, when the competition is bigger than ever, project success is a crucial goal for organizations. In order to achieve project success many decisions shall be made before the project kick-off. One of these decisions is investigated in this paper: the decision to whether co-locate or not the project team. The paper provides a literature review about team co-location, its advantages and disadvantages, virtual teams and project performance parameters. It is proposed a table to be used as a guide to determine if the projects achieve the success or not. This paper also presents a case study where 3 couples of similar system projects were analysed. In each couple, the first Product Development (PD) has occurred with a co-located team and in the second one has occurred with a virtual team (not co-located team). The project performance parameters were identified using the proposed table.
ÁreaETES
TipoEnterprise Architecture for Innovation
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > COLIT > The Effects of...
Conteúdo da Pasta docacessar
Conteúdo da Pasta source
paper.pdf 05/03/2007 16:52 107.3 KiB 
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvopaper.pdf
Grupo de Usuáriosadministrator
marciana
marina.natalino@embraer.com.br
Visibilidadeshown
Permissão de Leituradeny from all and allow from 150.163
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/444BQ9E
Acervo Hospedeirolcp.inpe.br/ignes/2004/02.12.18.39
cptec.inpe.br/walmeida/2003/04.25.17.12
6. Notas
Nota1
Campos Vaziosarchivingpolicy archivist callnumber contenttype copyholder copyright creatorhistory descriptionlevel dissemination documentstage doi edition identifier isbn issn label lineage mirrorrepository nextedition notes numberofvolumes orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup rightsholder schedulinginformation secondarydate secondarymark serieseditor shorttitle sponsor tertiarymark tertiarytype url versiontype volume
7. Controle da descrição
e-Mail (login)marciana
atualizar