Resultado da Pesquisa
A expressão de busca foi <secondaryty pi and firstg las and y 2006 and (dissemination websci or dissemination portalcapes)>.
29 referências foram encontradas buscando em 17 dentre 17 Arquivos
(este total pode incluir algumas duplicatas - para ver a conta certa clique no botão Mostrar Todas).
As 10 mais recentes estão listadas abaixo.
Data e hora local de busca: 20/04/2024 04:56.

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16b.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZGivnK2Y/NvkJr
Repositóriosid.inpe.br/mtc-m17@80/2006/12.19.11.36   (acesso restrito)
Última Atualização2006:12.19.11.36.47 (UTC) marciana
Repositório de Metadadossid.inpe.br/mtc-m17@80/2006/12.19.11.36.48
Última Atualização dos Metadados2021:07.28.22.28.26 (UTC) administrator
Chave SecundáriaINPE-14453-PRE/9523
ISSN0734-2101
Chave de CitaçãoRodriguesPrioFrei:2006:EfGrCo
TítuloEffects of the growth conditions on the roughness of amorphous hydrogenated carbon films deposited by plasma enhanced chemical vapor deposition
Ano2006
MêsNov./Dec.
Data de Acesso20 abr. 2024
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho221 KiB
2. Contextualização
Autor1 Rodrigues, Gil Capote
2 Prioli, R.
3 Freite Júnior, F. L.
Grupo1 LAS-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2 Departamento de Física, Pontifícia Universidade Católica do Rio de Janeiro (PUC-RJ)
3 Departamento de Física, Pontifícia Universidade Católica do Rio de Janeiro (PUC-RJ)
RevistaJournal of Vacuum Science and Technology A: Vacuum, Surfaces and Films
Volume26
Número6
Páginas2212-2216
Histórico (UTC)2006-12-19 11:36:49 :: simone -> administrator ::
2008-06-29 02:30:08 :: administrator -> simone ::
2011-05-24 04:01:20 :: simone -> administrator ::
2012-07-13 21:51:55 :: administrator -> banon :: 2006
2012-09-27 18:33:03 :: banon -> administrator :: 2006
2012-11-24 01:39:55 :: administrator -> simone :: 2006
2013-02-20 15:19:56 :: simone -> administrator :: 2006
2014-08-15 01:39:27 :: administrator -> marciana :: 2006
2014-08-20 13:14:20 :: marciana -> administrator :: 2006
2021-07-28 22:28:26 :: administrator -> marciana :: 2006
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
ResumoThe surface roughness and scaling behavior of a-C:H films deposited by plasma enhanced chemical vapor deposition from CH4Ar mixtures were studied using atomic force microscopy. Raman spectroscopy gives some insights about the film microstructure. The film surface roughness is shown to decrease with the increase of deposition negative self-bias, while the presence of Ar ions enhances this effect. An analysis of the film surface and scaling behavior suggests that there is a transition of the mechanism of the film growth from a random deposition with surface diffusion process to a thermal spike based process that occurs upon the increase of the negative self-bias voltage and the argon bombardment.
ÁreaFISMAT
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > Effects of the...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo AlvoEffects of growth conditions.pdf
Grupo de Usuáriosadministrator
banon
marciana
simone
Grupo de Leitoresadministrator
marciana
Visibilidadeshown
Detentor da CópiaSID/SCD
Política de Arquivamentodenypublisher allowfinaldraft
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
Lista de Itens Citandosid.inpe.br/bibdigital/2013/09.24.19.30 2
DivulgaçãoPORTALCAPES; COMPENDEX.
Acervo Hospedeirolcp.inpe.br/ignes/2004/02.12.18.39
cptec.inpe.br/walmeida/2003/04.25.17.12
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyright creatorhistory descriptionlevel doi e-mailaddress electronicmailaddress format isbn keywords label lineage mark mirrorrepository nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress project resumeid rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16b.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZGivnK2Y/PyFCx
Repositóriosid.inpe.br/mtc-m17@80/2007/03.26.14.59   (acesso restrito)
Última Atualização2017:07.21.17.35.21 (UTC) marciana
Repositório de Metadadossid.inpe.br/mtc-m17@80/2007/03.26.14.59.23
Última Atualização dos Metadados2018:06.05.03.44.57 (UTC) administrator
Chave SecundáriaINPE--PRE/
DOI10.4028/www.scientific.net/MSF.530-531.690
ISSN1662-9752
Chave de CitaçãoReisSiNoBaPiVi:2006:InZiPl
TítuloInfluence of zirconia plasma-sprayed coating on creep of the Ti-6Al-4V alloy
Ano2006
Data de Acesso20 abr. 2024
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho581 KiB
2. Contextualização
Autor1 Reis, Danieli Aparecida Pereira
2 Silva, C. R. M.
3 Nono, Maria do Carmo de Andrade
4 Barboza, M. J. R.
5 Piorino, F.
6 Vieira, Rogério de Almeida
Grupo1 LAS-INPE-MCT-BR
2
3 LAS-INPE-MCT-BR
4
5
6 LAS-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2
3 Instituto Nacional de Pesquisas Espaciais (INPE)
4
5
6 Instituto Nacional de Pesquisas Espaciais (INPE)
RevistaMaterials Science Forum. Advanced Powder Technology V Book Series
Volume530/531
Páginas690-695
Histórico (UTC)2007-03-26 14:59:23 :: simone -> administrator ::
2012-10-22 21:07:28 :: administrator -> simone :: 2006
2013-02-20 15:19:57 :: simone -> administrator :: 2006
2016-06-04 21:39:21 :: administrator -> marciana :: 2006
2017-07-21 17:35:21 :: marciana -> administrator :: 2006
2018-06-05 03:44:57 :: administrator -> marciana :: 2006
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
Palavras-ChaveTi-6Al-4V
Oxidation
Plasma-sprayed coatings
Creep
ResumoThe titanium affinity by oxygen is one of main factors that limit the application of their alloys as structural materials at high temperatures. Notables advanceds have been observed in the development of titanium alloys with the objective of improving the specific high temperature strength and creep-resistance properties. However, the surface oxidation limits the use of these alloys in temperatures up to 600ºC. The objective of this work was estimate the influence of plasma-sprayed coatings for oxidation protection on creep of the primary on secondary creep states. Constant load creep tests were conducted with Ti-6Al-4V alloy in air for coated and uncoated samples and in nitrogen atmosphere for uncoated samples at 500ºC to evaluated the oxidation protection on creep of the Ti-6Al-4V alloy. Yttria (8wt.%) stabilized zirconia (YSZ) with a CoNICrAly bond coat was atmospherically plasma sprayed on Ti-6Al-4V specimens. Results indicated the creep resistance of the coated alloy was greater than uncoated in air, but nitrogen atmosphere was more efficient in oxidation protection. Previously reported results about the activation energies and the stress exponents values indicate that the primary and stationary creep, for both test conditions, was probably controlled by discolation climb. Occurred a decreasing of steady state creep in function of the reduction of oxidation process, showing that Ti-6Al-4V alloy lifetime was strongly affected by the atmosphere due the oxidation suffered by the material.
ÁreaFISMAT
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > Influence of zirconia...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvoreis_influence.pdf
Grupo de Usuáriosadministrator
simone
Grupo de Leitoresadministrator
marciana
Visibilidadeshown
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
DivulgaçãoWEBSCI; PORTALCAPES.
Acervo Hospedeirocptec.inpe.br/walmeida/2003/04.25.17.12
6. Notas
Campos Vaziosalternatejournal archivingpolicy archivist callnumber copyholder copyright creatorhistory descriptionlevel e-mailaddress electronicmailaddress format isbn label lineage mark mirrorrepository month nextedition notes number orcid parameterlist parentrepositories previousedition previouslowerunit progress project resumeid rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16b.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZGivnK2Y/Nvkgh
Repositóriosid.inpe.br/mtc-m17@80/2006/12.19.11.12   (acesso restrito)
Última Atualização2006:12.19.11.12.40 (UTC) administrator
Repositório de Metadadossid.inpe.br/mtc-m17@80/2006/12.19.11.12.42
Última Atualização dos Metadados2018:06.05.03.44.42 (UTC) administrator
Chave SecundáriaINPE--PRE/
ISSN0925-9635
Chave de CitaçãoRodriguesJaMiLeViFr:2006:DeHaAm
TítuloDeposition of hard amorphous hydrogenated carbon films by radiofrequency parallel-plate hollow-cathode plasmas
Ano2006
Data de Acesso20 abr. 2024
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho418 KiB
2. Contextualização
Autor1 Rodrigues, Gil Capote
2 Jacobsohn, L. G.
3 Michel, M. D.
4 Lepienski, C. M.
5 Vieira, A. L.
6 Franceschini, D. F.
Grupo1 LAS-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2 Materials Science & Technology Division, Los Alamos National Laboratory
3 Departamento de Física, Universidade Federal do Paraná
4 Departamento de Física, Universidade Federal do Paraná
5 Instituto de Física, Universidade Federal Fluminense
6 Instituto de Física, Universidade Federal Fluminense
RevistaDiamond and Related Materials
VolumeIn press
Histórico (UTC)2006-12-19 11:12:42 :: simone -> administrator ::
2010-05-11 02:48:21 :: administrator -> simone ::
2011-05-29 09:30:09 :: simone -> administrator ::
2012-11-24 01:39:54 :: administrator -> simone :: 2006
2013-02-20 15:19:56 :: simone -> administrator :: 2006
2018-06-05 03:44:42 :: administrator -> marciana :: 2006
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Palavras-ChaveHollow-cathode
Plasma deposition
Amorphous hydrogenated carbon
Mechanical properties
ResumoHard amorphous hydrogenated carbon (a-C:H) films were deposited by plasma decomposition of CH4 gas in a RF parallel-plate hollow-cathode system. The deposition system was built by placing a metallic plate in parallel to and in electrical contact with an usual RF-PECVD planar cathode. Self-bias versus RF power curves were used to make an initial characterization of plasma discharges in nitrogen gas atmospheres, for pressures between 10 and 100 mTorr. The strongly increased power consumption to obtain the same self-bias in the hollow-cathode system evidenced an increase in plasma density. The a-C:H films were deposited onto Si single crystalline substrates, in the − 50 to − 500 V self-bias range, at 5, 10 and 50 mTorr deposition pressures. The film deposition rate was found to be about four times than that usually observed for single-cathode RF-PECVD-deposited films, under methane atmosphere, at similar pressure and self-bias conditions. Characterization of film structure was carried out by Raman spectroscopy on films deposited at 10 and 50 mTorr pressures. Gaussian deconvolution of the Raman spectra in its D and G bands shows a continuous increase in the ID/IG integrated band intensity ratio upon self-bias increase, obeying the expected increasing behavior of the sp2 carbon atom fraction. The peak position of the G band was found to increase up to − 300 V self-bias, showing a nearly constant behavior for higher self-bias absolute values. On the other hand, the G band width showed a nearly constant behavior within the entire self-bias range. Nanohardness measurements have shown that films deposited with self-bias greater than 300 V are as hard as films obtained by the usual PECVD techniques, showing a maximum hardness of about 18 GPa. Films were also found to develop high internal compressive stress. The stress dependence on self-bias showed a strong maximum at about − 200 V self-bias, with a maximum stress value of about 5 GPa.
ÁreaFISMAT
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > Deposition of hard...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo AlvoDeposition of hard.pdf
Grupo de Usuáriosadministrator
simone
Visibilidadeshown
Política de Arquivamentodenypublisher denyfinaldraft24
Permissão de Leituradeny from all and allow from 150.163
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
DivulgaçãoWEBSCI; PORTALCAPES; COMPENDEX.
Acervo Hospedeirolcp.inpe.br/ignes/2004/02.12.18.39
cptec.inpe.br/walmeida/2003/04.25.17.12
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyholder copyright creatorhistory descriptionlevel documentstage doi e-mailaddress electronicmailaddress format isbn label lineage mark mirrorrepository month nextedition notes number orcid pages parameterlist parentrepositories previousedition previouslowerunit progress project readergroup resumeid rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url versiontype
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16b.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZGivnK2Y/NnR3x
Repositóriosid.inpe.br/mtc-m17@80/2006/12.06.15.35   (acesso restrito)
Última Atualização2006:12.06.15.35.03 (UTC) administrator
Repositório de Metadadossid.inpe.br/mtc-m17@80/2006/12.06.15.35.04
Última Atualização dos Metadados2018:06.05.03.44.18 (UTC) administrator
Chave SecundáriaINPE-14420-PRE/9504
DOI10.4028/www.scientific.net/MSF.530-531.461
ISSN1662-9752
Chave de CitaçãoNono:2006:CoBeSt
TítuloCompaction behavior study of powder composed by nanoparticle agglomerates and aggregates
Ano2006
Data de Acesso20 abr. 2024
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho17 KiB
2. Contextualização
AutorNono, Maria do Carmo de Andrade
Identificador de Curriculo8JMKD3MGP5W/3C9JHRC
GrupoLAS-INPE-MCT-BR
AfiliaçãoInstituto Nacional de Pesquisas Espaciais (INPE)
RevistaMaterials Science Forum. Advanced Powder Technology V Book Series
Volume530 - 531
Páginas461-466
Histórico (UTC)2006-12-06 15:35:04 :: simone -> administrator ::
2012-11-24 01:39:37 :: administrator -> simone :: 2006
2013-02-07 13:22:10 :: simone -> administrator :: 2006
2013-02-09 09:37:25 :: administrator -> simone :: 2006
2013-02-20 15:19:54 :: simone -> administrator :: 2006
2018-06-05 03:44:18 :: administrator -> marciana :: 2006
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
Palavras-ChaveNanostructured powder
nanoparticle aggregates
nanoparticle agglomerates
compaction behavior
characterization
ResumoCeramic powder compaction by pressing requires weak-agglomerated powders to obtain high dense compacts and consequently dense sintered ceramic body. In this work powders with different agglomerated and/or aggregayted size distributions was compacted by uniaxial and isostatic pressing. The powder and compacts were characterized by mercury and nitrogen porosimetry. BET and SEM. Analysis of X-rays diffractions peaks was used to determine the particle size (diameter). The Scherrer method was used to obtain the estimated average nanoparticle size. The results showed that all aggregated and weak agglomerated powders were composed by nanoparticles. This study indicated that the nanoparticle aggregates and weak agglomerates were destroyed during the pressing stage conducing to a increase of the packing degree of the powder particles.
ÁreaFISMAT
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > Compaction behavior study...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo AlvoCompactation behavior study.pdf
Grupo de Usuáriosadministrator
simone
Visibilidadeshown
Detentor da CópiaSID/SCD
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
DivulgaçãoWEBSCI; PORTALCAPES.
Acervo Hospedeirolcp.inpe.br/ignes/2004/02.12.18.39
cptec.inpe.br/walmeida/2003/04.25.17.12
6. Notas
Campos Vaziosalternatejournal archivingpolicy archivist callnumber copyright creatorhistory descriptionlevel e-mailaddress electronicmailaddress format isbn label lineage mark mirrorrepository month nextedition notes number orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16b.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZGivnK2Y/NnQnz
Repositóriosid.inpe.br/mtc-m17@80/2006/12.06.15.05   (acesso restrito)
Última Atualização2006:12.06.15.05.28 (UTC) administrator
Repositório de Metadadossid.inpe.br/mtc-m17@80/2006/12.06.15.05.29
Última Atualização dos Metadados2018:06.05.03.44.18 (UTC) administrator
Chave SecundáriaINPE-14418-PRE/9502
DOI10.4028/www.scientific.net/MSF.530-531.661
ISSN1662-9752
Chave de CitaçãoFonsecaNonoCair:2006:MiStAl
TítuloMicrostructure study of alumina ceramics from powder mixtures of nano and microsized particles
Ano2006
Data de Acesso20 abr. 2024
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho76 KiB
2. Contextualização
Autor1 Fonseca, Solange Tâmara da
2 Nono, Maria do Carmo de Andrade
3 Cairo, C. A. A.
Identificador de Curriculo1
2 8JMKD3MGP5W/3C9JHRC
Grupo1 LAS-INPE-MCT-BR
2 LAS-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2 Instituto Nacional de Pesquisas Espaciais (INPE)
3 CTA
Endereço de e-Mail do Autor1 solange@las.inpe.br
RevistaMaterials Science Forum. Advanced Powder Technology V Book Series
Volume530/531
Páginas661-664
Histórico (UTC)2006-12-06 15:05:29 :: simone -> administrator ::
2012-11-24 01:39:36 :: administrator -> simone :: 2006
2013-02-07 13:11:30 :: simone -> administrator :: 2006
2013-02-14 04:16:23 :: administrator -> simone :: 2006
2013-02-20 15:19:54 :: simone -> administrator :: 2006
2018-06-05 03:44:18 :: administrator -> marciana :: 2006
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
Palavras-Chavemicro and nanostructured ceramic
alumina ceramic
nanosized particles synthesis
microstructure
ResumoIn this work, was proposed to produce nanosized a-Al2O3 powder from precipitation reactions, in order to reduce the alumina ceramics sintering temperature. For this an addition of nanosized powder in the commercial microsized powders was done. The nano and microsized powder particle mixtures were obtained by precipitation of nanosized aluminium hydroxide in microsized Al2O3 in liquid suspension. Several compositions of nano and microzed powders were carried out. These powder compositions were based on data of simulated particles packing. The nano and microsized powder mixtures was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and thermogravimetric and differential themal analysis (TGA and DTG). The powder mixtures were compacted by uniaxial (75MPa) and isostatic (300MPa) pressing producing cylindrical samples. The powder compacted samples were sintered at 1400ºC. Sintered ceramics were characterized by XRD and SEM. The results showed that the higher density of sintered ceramic was obtained for 65% of microsized powder and 35% of nanosized powder mixture. The composition of size of particles of the powder was in agreement with the theoretical simulation.
ÁreaFISMAT
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > Microstructure study of...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo AlvoMicrostructure study of alumina.pdf
Grupo de Usuáriosadministrator
simone
Visibilidadeshown
Detentor da CópiaSID/SCD
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
DivulgaçãoWEBSCI; PORTALCAPES.
Acervo Hospedeirolcp.inpe.br/ignes/2004/02.12.18.39
cptec.inpe.br/walmeida/2003/04.25.17.12
6. Notas
Campos Vaziosalternatejournal archivingpolicy archivist callnumber copyright creatorhistory descriptionlevel e-mailaddress format isbn label lineage mark mirrorrepository month nextedition notes number orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16b.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZGivnK2Y/NnNHx
Repositóriosid.inpe.br/mtc-m17@80/2006/12.06.13.49   (acesso restrito)
Última Atualização2006:12.06.13.49.37 (UTC) administrator
Repositório de Metadadossid.inpe.br/mtc-m17@80/2006/12.06.13.49.38
Última Atualização dos Metadados2018:06.05.03.44.18 (UTC) administrator
Chave SecundáriaINPE-14417-PRE/9501
DOI10.4028/www.scientific.net/MSF.530-531.456
ISSN1662-9752
Chave de CitaçãoMineiroNonoKura:2006:3MoY2
TítuloSintering properties of ZrO2 - 3 Mol% Y2O3 obtained from mixture of Nano and Microcrystalline powders
Ano2006
Data de Acesso20 abr. 2024
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho19 KiB
2. Contextualização
Autor1 Mineiro, Sergio Luiz
2 Nono, Maria do Carmo de Andrade
3 Kuranaga, Carlos
Identificador de Curriculo1
2 8JMKD3MGP5W/3C9JHRC
Grupo1 LAS-INPE-MCT-BR
2 LAS-INPE-MCT-BR
3 LAS-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2 Instituto Nacional de Pesquisas Espaciais (INPE)
3 Instituto Nacional de Pesquisas Espaciais (INPE)
Endereço de e-Mail do Autor1 sergiolm@las.inpe.br
RevistaMaterials Science Forum. Advanced Powder Technology V Book Series
Volume531/531
Páginas456-460
Histórico (UTC)2006-12-06 13:49:38 :: simone -> administrator ::
2012-11-24 01:39:35 :: administrator -> simone :: 2006
2013-02-07 13:21:06 :: simone -> administrator :: 2006
2013-02-09 03:19:01 :: administrator -> simone :: 2006
2013-02-20 15:19:54 :: simone -> administrator :: 2006
2018-06-05 03:44:18 :: administrator -> marciana :: 2006
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
Palavras-ChaveYttria-stabilized zirconia
nanoparticles
cermic sintering
dilatometry
ResumoThe polymeric precursor route based on the Pechini process was used to prepare a mixture of nano and microcrystalline powders. The zirconia powder was stabilized with 3 mol% of yttria. Powder characteristics were evaluated by the BET technique determined the specific area and the BJH method supplied the pore size distribution. The X-ray diffraction results and SEM observations were carried ou to characterize both the powder mixture and the microstructures of the ceramics bodies.The sintering behavior shown in this work was studied by dilatometric experiment being considered the shrinkage rate and densification of the microstructure.
ÁreaFISMAT
Arranjourlib.net > Produção anterior à 2021 > LABAS > Sintering properties of...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo AlvoSintering properties of ZrO2.pdf
Grupo de Usuáriosadministrator
simone
Visibilidadeshown
Detentor da CópiaSID/SCD
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
DivulgaçãoWEBSCI; PORTALCAPES.
Acervo Hospedeirolcp.inpe.br/ignes/2004/02.12.18.39
cptec.inpe.br/walmeida/2003/04.25.17.12
6. Notas
Campos Vaziosalternatejournal archivingpolicy archivist callnumber copyright creatorhistory descriptionlevel e-mailaddress format isbn label lineage mark mirrorrepository month nextedition notes number orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16b.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZGivnK2Y/NnNtV
Repositóriosid.inpe.br/mtc-m17@80/2006/12.06.13.37   (acesso restrito)
Última Atualização2006:12.06.13.37.12 (UTC) administrator
Repositório de Metadadossid.inpe.br/mtc-m17@80/2006/12.06.13.37.13
Última Atualização dos Metadados2018:06.05.03.44.18 (UTC) administrator
Chave SecundáriaINPE-14416-PRE/9500
DOI10.4028/www.scientific.net/MSF.530-531.421
ISSN1662-9752
Chave de CitaçãoBeckNonoPior:2006:MiChCe
TítuloMicrostructure characteristics of Ce-ZTA ceramic composites obtained by liquid phase sintering
Ano2006
Data de Acesso20 abr. 2024
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho75 KiB
2. Contextualização
Autor1 Beck, Haine
2 Nono, Maria do Carmo de Andrade
3 Piorino, F.
Identificador de Curriculo1
2 8JMKD3MGP5W/3C9JHRC
Grupo1 LAS-INPE-MCT-BR
2 LAS-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2 Instituto Nacional de Pesquisas Espaciais (INPE)
3 CTA
Endereço de e-Mail do Autor1 haine@las.inpe.br
RevistaMaterials Science Forum. Advanced Powder Technology V Book Series
Volume530-531
Páginas421-424
Histórico (UTC)2006-12-06 13:37:13 :: simone -> administrator ::
2012-11-24 01:39:34 :: administrator -> simone :: 2006
2013-02-07 13:10:30 :: simone -> administrator :: 2006
2013-02-15 00:43:05 :: administrator -> simone :: 2006
2013-02-20 15:19:54 :: simone -> administrator :: 2006
2018-06-05 03:44:18 :: administrator -> marciana :: 2006
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
Palavras-ChaveZirconia-toughned alumina
liquid phase sintering
microestructure
glass infiltrated
ResumoZirconia-toughned alumina (ZTA) cermics with Ce-TZP (tetragonal zirconia polycrystalline doped with ceria) volume fraction on 33% were prepared with the addition. The influence of glass infiltrated method was investigated. Coprecipitated Zr and Ce hydroxide mixture was obtained from ZrOCI28H2O and CeCl3. 7H2O aqueous solution CeO2-ZrO2 calcinated powder was compacted and the compacted samples were sintered at 1180ºC. Powder samples were characterized by scanning electronic microscopy (SEM). The volume fraction of each phase, the grains size and shapes, and the porosity were investigated with SEM. The relative density and shrinkage was investigate too. The results showed that the crystalline matrix was composed by SiO2-B2O3-La2O3-Al2O3-Ce-TZP and revealed the important role played the glassy phase in the densification of this ceramic composite.
ÁreaFISMAT
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > Microstructure characteristics of...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Arquivo AlvoMicrostructure characteristics.pdf
Grupo de Usuáriosadministrator
simone
Visibilidadeshown
Detentor da CópiaSID/SCD
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
DivulgaçãoWEBSCI; PORTALCAPES.
Acervo Hospedeirolcp.inpe.br/ignes/2004/02.12.18.39
cptec.inpe.br/walmeida/2003/04.25.17.12
6. Notas
Campos Vaziosalternatejournal archivingpolicy archivist callnumber copyright creatorhistory descriptionlevel e-mailaddress format isbn label language lineage mark mirrorrepository month nextedition notes number orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16b.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZGivnK2Y/NnMP3
Repositóriosid.inpe.br/mtc-m17@80/2006/12.06.13.07   (acesso restrito)
Última Atualização2006:12.06.13.07.39 (UTC) administrator
Repositório de Metadadossid.inpe.br/mtc-m17@80/2006/12.06.13.07.40
Última Atualização dos Metadados2018:06.05.03.44.17 (UTC) administrator
Chave SecundáriaINPE-14414-PRE/9498
ISSN0169-4332
Chave de CitaçãoChiaramonteAbrFabCar:2006:XrMuDi
TítuloX-ray multiple diffraction in the characterization of TiNO and TiO2 thin films grown on Si(0 0 1)
Ano2006
MêsNov.
Data de Acesso20 abr. 2024
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho321 KiB
2. Contextualização
Autor1 Chiaramonte, T.
2 Abramof, Eduardo
3 Fabreguette, F.
4 Sacilotti
5 Cardoso, L. P.
Identificador de Curriculo1
2 8JMKD3MGP5W/3C9JGUH
Grupo1
2 LAS-INPE-MCT-BR
Afiliação1 IFGW, UNICAMP
2 Instituto Nacional de Pesquisas Espaciais (INPE)
3 Thin Films and Nanostructure Group, Universite de Bourgogne
4 Thin Films and Nanostructure Group, Universite de Bourgogne
5 Thin Films and Nanostructure Group, Universite de Bourgogne
RevistaApplied Surface Science
Volume253
Número3
Páginas1590-1594
Histórico (UTC)2006-12-06 13:07:40 :: simone -> administrator ::
2012-11-24 01:39:32 :: administrator -> simone :: 2006
2013-02-20 15:19:54 :: simone -> administrator :: 2006
2018-06-05 03:44:17 :: administrator -> marciana :: 2006
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Palavras-ChaveTiO2
TiNO
MOCVD
Thin film
X-ray multiple diffraction
Renninger scan
ResumoTiO2 and TiNxOy thin films grown by low pressure metal-organic chemical vapor deposition (LP-MOCVD) on top of Si(0 0 1) substrate were characterized by X-ray multiple diffraction. X-ray reflectivity analysis of TiO2[1 1 0] and TiNO[1 0 0] polycrystalline layers allowed to determine the growth rate (−80 Å/min) of TiO2 and (−40 Å/min) of TiNO films. X-ray multiple diffraction through the Renninger scans, i.e., -scans for (0 0 2)Si substrate primary reflection is used as a non-conventional method to obtain the substrate lattice parameter distortion due to the thin film conventional deposition, from where the information on film strain type is obtained.
ÁreaFISMAT
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > X-ray multiple diffraction...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo AlvoX ray multiple difrraction.pdf
Grupo de Usuáriosadministrator
simone
Visibilidadeshown
Detentor da CópiaSID/SCD
Política de Arquivamentodenypublisher denyfinaldraft24
Permissão de Leituradeny from all and allow from 150.163
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
DivulgaçãoWEBSCI; PORTALCAPES; COMPENDEX.
Acervo Hospedeirolcp.inpe.br/ignes/2004/02.12.18.39
cptec.inpe.br/walmeida/2003/04.25.17.12
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyright creatorhistory descriptionlevel documentstage doi e-mailaddress electronicmailaddress format isbn label lineage mark mirrorrepository nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url versiontype
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16b.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZGivnK2Y/NngAT
Repositóriosid.inpe.br/mtc-m17@80/2006/12.05.13.31.50   (acesso restrito)
Última Atualização2006:12.05.13.31.49 (UTC) administrator
Repositório de Metadadossid.inpe.br/mtc-m17@80/2006/12.05.13.31.51
Última Atualização dos Metadados2018:06.05.03.44.14 (UTC) administrator
Chave SecundáriaINPE-14406-PRE/9492
DOI10.4028/www.scientific.net/MSF.530-531.665
ISSN1662-9752
Chave de CitaçãoKoldayevaNonoCast:2006:BaCeBa
TítuloBa2Ti9O20 ceramic from BaSO4 and TiO2 powder synthesis mixture
Ano2006
Data de Acesso20 abr. 2024
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho64 KiB
2. Contextualização
Autor1 Koldayeva, Yu
2 Nono, Maria do Carmo de Andrade
3 Castro, Pedro José de
Identificador de Curriculo1
2 8JMKD3MGP5W/3C9JHRC
Grupo1 LAS-INPE-MCT-BR
2 LAS-INPE-MCT-BR
3 LAP-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2 Instituto Nacional de Pesquisas Espaciais (INPE)
3 Instituto Nacional de Pesquisas Espaciais (INPE)
RevistaMaterials Science Forum. Advanced Powder Technology V Book Series
Volume530-531
Páginas665-670
Histórico (UTC)2006-12-05 13:34:06 :: simone -> administrator ::
2012-11-24 01:39:30 :: administrator -> simone :: 2006
2013-02-07 13:13:05 :: simone -> administrator :: 2006
2013-02-08 22:12:29 :: administrator -> simone :: 2006
2013-02-20 15:19:54 :: simone -> administrator :: 2006
2018-06-05 03:44:14 :: administrator -> marciana :: 2006
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
Palavras-Chavepowder synthesis
processing
barium nanotitanate
barium sulphate
ResumoIn this work the BaSO4 powder was synthesized from BaCO3 powder that was attacked with HCI. Then BaCI2 was precipitated in (NH4)2 SO4 containing TiO2 powder. The influences of processing and TiO2 particles presence were investigated by X-rays diffraction and SEM. It was found that the washing of BaSO4 - TiO2 precipitated by ethanol greatly benefited the formation the smaller size particles.
ÁreaFISMAT
Arranjo 1urlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > Ba2Ti9O20 ceramic from...
Arranjo 2urlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAP > Ba2Ti9O20 ceramic from...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo AlvoBa2ti9O20 ceramic.pdf
Grupo de Usuáriosadministrator
simone
Visibilidadeshown
Detentor da CópiaSID/SCD
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
8JMKD3MGPCW/3ET2RFS
DivulgaçãoWEBSCI; PORTALCAPES.
Acervo Hospedeirolcp.inpe.br/ignes/2004/02.12.18.39
cptec.inpe.br/walmeida/2003/04.25.17.12
6. Notas
Campos Vaziosalternatejournal archivingpolicy archivist callnumber copyright creatorhistory descriptionlevel e-mailaddress electronicmailaddress format isbn label lineage mark mirrorrepository month nextedition notes number orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16b.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZGivnK2Y/NmLAD
Repositóriosid.inpe.br/mtc-m17@80/2006/12.04.18.48   (acesso restrito)
Última Atualização2006:12.04.18.48.16 (UTC) administrator
Repositório de Metadadossid.inpe.br/mtc-m17@80/2006/12.04.18.48.17
Última Atualização dos Metadados2018:06.05.03.44.13 (UTC) administrator
Chave SecundáriaINPE-14404-PRE/9490
ISSN0921-5093
Chave de CitaçãoNonoCastCast:2006:MeBeMi
TítuloMechanical behavior and microstructural analysis of alumina–titanium brazed interfaces
Ano2006
Mêsnov.
Data de Acesso20 abr. 2024
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho332 KiB
2. Contextualização
Autor1 Nono, Maria do Carmo de Andrade
2 Castro, Joaquim José Barroso de
3 Castro, Pedro José de
Identificador de Curriculo1 8JMKD3MGP5W/3C9JHRC
Grupo1 LAS-INPE-MCT-BR
2 LAP-INPE-MCT-BR
3 LAP-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2 Instituto Nacional de Pesquisas Espaciais (INPE)
3 Instituto Nacional de Pesquisas Espaciais (INPE)
RevistaMaterials Science and Engineering A
Volume435/436
Páginas602-605
Histórico (UTC)2006-12-04 18:49:36 :: simone -> administrator ::
2008-06-29 02:29:23 :: administrator -> banon ::
2008-11-06 18:22:40 :: banon -> administrator ::
2012-11-24 01:39:28 :: administrator -> simone :: 2006
2013-02-20 15:19:53 :: simone -> administrator :: 2006
2018-06-05 03:44:13 :: administrator -> marciana :: 2006
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
Palavras-ChaveCeramic-metal joint
Mechanical bonded interface
Mechanical properties
ResumoThe ceramic-metal joints for electrical and vacuum engineering devices require high-density alumina ceramic and low glass phase content. Consequently it is necessary to introduce variations in the standard method of metallizing. Our assembly was designed to minimize the difference of thermal expansion between the alumina ceramic and titanium flanges, and was composed by alumina part/Mo-Mn film/Ag-Cu brazing alloy/Ni layer/titanium part. Its transversal section was observed by SEM and analyzed by scanning EDS. The assembly was submitted to the traction test to obtain σ × curves to study the mechanical behavior. SEM and EDS results indicated that the alumina superficial pores were filled out by molybdenum resulting in a mechanical bonded interface. In the same way, the copper from Ag-Cu brazing alloy filled in the pores of the Mo-Mn layer, modifying the original brazing alloy composition. The fracture occurred in the ceramic part and this was related to the formation of the Al2[(Mo, Mn)O4]3 crystalline phase in the alumina-Mo-Mn interface, which contributes to the increase of the adherence of the metallic layer to the ceramic. The mechanical resistance of the interface between the Ag-Cu brazing alloy and Mo-Mn layer is increased by the diffusion of copper.
ÁreaFISMAT
Arranjo 1urlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > Mechanical behavior and...
Arranjo 2urlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAP > Mechanical behavior and...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo AlvoMechanical behavior.pdf
Grupo de Usuáriosadministrator
banon
simone
Visibilidadeshown
Detentor da CópiaSID/SCD
Política de Arquivamentodenypublisher denyfinaldraft24
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
8JMKD3MGPCW/3ET2RFS
DivulgaçãoWEBSCI; PORTALCAPES.
Acervo Hospedeirolcp.inpe.br/ignes/2004/02.12.18.39
cptec.inpe.br/walmeida/2003/04.25.17.12
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyright creatorhistory descriptionlevel doi e-mailaddress electronicmailaddress format isbn label lineage mark mirrorrepository nextedition notes number orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url
7. Controle da descrição
e-Mail (login)marciana
atualizar