Resultado da Pesquisa
A expressão de busca foi <secondaryty pi and firstg las and y 2009 and not dissemination websci and ref journal>.
5 referências encontradas buscando em 17 dentre 17 Arquivos.
Data e hora local de busca: 26/04/2024 20:37.
1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Siteplutao.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
IdentificadorJ8LNKAN8RW/34BEPQE
Repositóriodpi.inpe.br/plutao@80/2008/12.04.12.03.03   (acesso restrito)
Última Atualização2017:07.21.16.36.23 (UTC) marciana
Repositório de Metadadosdpi.inpe.br/plutao@80/2008/12.04.12.03.04
Última Atualização dos Metadados2018:06.05.00.12.36 (UTC) administrator
Chave SecundáriaINPE--PRE/
DOI10.1166/jnn.2009.NS83
ISSN1533-4880
Rótulolattes: 3374288398505199 1 MirandaAzeBalBelFer:2008:NoPrOb
Chave de CitaçãoMirandaAzeBalBelFer:2009:NoPrOb
TítuloA Novel Procedure to Obtain Nanocrystalline Diamond/Porous Silicon Composite by Chemical Vapor Deposition/Infiltration Processes
Ano2009
MêsJune
Data de Acesso26 abr. 2024
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho3376 KiB
2. Contextualização
Autor1 Miranda, Claudia Renata Borges
2 Azevedo, Adriana Faria
3 Baldan, Maurício Ribeiro
4 Beloto, A F
5 Ferreira, Neidenêi Gomes
Grupo1
2
3 LAS-CTE-INPE-MCT-BR
Afiliação1
2
3 Instituto Nacional de Pesquisas Espaciais (INPE)
Endereço de e-Mail do Autor1 claudia@las.inpe.br
2
3 baldan@las.inpe.br
4
5 neidenei@las.inpe.br
Endereço de e-Mailclaudia@las.inpe.br
RevistaJournal of Nanoscience and Nanotechnology
Volume9
Número6
Páginas3877-3882
Nota SecundáriaB2_BIOTECNOLOGIA B2_CIÊNCIAS_BIOLÓGICAS_II B2_CIÊNCIAS_BIOLÓGICAS_III A1_ENGENHARIAS_II A1_INTERDISCIPLINAR A2_MATERIAIS B1_MEDICINA_I B1_MEDICINA_II A2_MEDICINA_VETERINÁRIA B2_QUÍMICA
Histórico (UTC)2008-12-04 16:12:39 :: lattes -> simone ::
2009-06-26 19:20:13 :: simone -> administrator ::
2010-05-12 02:04:01 :: administrator -> simone ::
2010-07-07 18:38:50 :: simone -> administrator ::
2013-09-24 21:56:16 :: administrator -> marciana :: 2009
2017-07-21 16:36:23 :: marciana -> administrator :: 2009
2018-06-05 00:12:36 :: administrator -> marciana :: 2009
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
Palavras-ChaveNanodiamond
porous silicon
Chemical Vapor Infiltration
Chemical Vapor Depositation
Acetonitrile
ResumoNanocrystalline diamond (NCD) films were formed on porous silicon (PS) substrate by Chemical Vapor Deposition/Infiltration (CVD/CVI) process using a hot filament reactor. This innovative procedure is determinant to grow a controlled three-dimensional diamond structure with diamond grains formation in the pores, covering uniformly the different growth planes. In this CVI process, a piece of reticulated vitreous carbon (RVC) was used, under de PS substrate, as an additional solid source of hydrocarbon that ensures the production of pertinent carbon growth species directly on PS and into its pores. PS substrates were obtained by anodization etching process of n-type silicon wafer in a hydrofluoric acid (HF) solution containing acetonitrile (CH3CN) which result in an uniform and well controlled porous distribution and size when compared with the usual ethanol solution. Depositions were performed using Ar-H-2-CH4 where the methane concentration varied from 0 up to 1.0 vol%, to analyze the influence of RVC use as an additional carbon source on growth mechanism. Scanning Electron Microscopy (SEM) and Field Emission Gun (FEG) were used to investigate PS and NCD film morphology. SEM images of NCD showed faceted nanograins with average size from 5 to 16 nm and uniform surface texture covering all the supports among the pores resulting in an apparent micro honeycomb structure. Raman spectra confirmed the existence of sp(2)-bonded carbon at the grain boundaries. The spectra showed a peak that may be deconvoluted in two components at 1332 cm(-1) (diamond) and 1345 cm(-1) (D band). Two shoulders at 1150 and 1490 cm(-1) also appear and are assigned to transpolyacetylene (TPA) segments at the grain boundaries of NCD surfaces. In addition, X-ray diffraction analyses of all films presented characteristic diamond diffraction peaks corresponding to < 111 >, < 220 > and < 311 >.
ÁreaFISMAT
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > A Novel Procedure...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Grupo de Usuárioslattes
simone
administrator
Grupo de Leitoresadministrator
marciana
Visibilidadeshown
Política de Arquivamentodenypublisher denyfinaldraft
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
Acervo Hospedeirodpi.inpe.br/plutao@80/2008/08.19.15.01
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyholder copyright creatorhistory descriptionlevel dissemination format isbn lineage mark mirrorrepository nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress project resumeid rightsholder schedulinginformation secondarydate session shorttitle sponsor subject targetfile tertiarymark tertiarytype typeofwork url
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16c.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador8JMKD3MGP8W/35REK2L
Repositóriosid.inpe.br/mtc-m18@80/2009/08.13.14.36   (acesso restrito)
Última Atualização2009:08.13.14.36.15 (UTC) administrator
Repositório de Metadadossid.inpe.br/mtc-m18@80/2009/08.13.14.36.17
Última Atualização dos Metadados2020:04.28.17.48.58 (UTC) administrator
Chave SecundáriaINPE--PRE/
ISSN1983-8409
2177-8833
Chave de CitaçãoRamosGrAcYiElAl:2009:OrStPh
TítuloOrdered structures and phase transitions in a phase field crystal model for adsorbed layers
Ano2009
MêsJune
Data de Acesso26 abr. 2024
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho156 KiB
2. Contextualização
Autor1 Ramos, Jorge Anderson Paiva
2 Granato, Enzo
3 Achim, Cristian V.
4 Ying, See Chen
5 Elder, Ken R.
6 Ala-Nissila, Tapio
Identificador de Curriculo1
2 8JMKD3MGP5W/3C9JH2J
Grupo1 LAS-CTE-INPE-MCT-BR
2 LAS-CTE-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2 Instituto Nacional de Pesquisas Espaciais (INPE)
3 Laboratory of Physics, Helsinki University of Technology
4 Department of Physics, Brown University
5 Department of Physics, Oakland University
6 Department of Physics, Brown University
RevistaJournal of Computational Interdisciplinary Sciences
Volume1
Número2
Páginas95-98
Histórico (UTC)2009-08-13 14:38:54 :: simone -> administrator ::
2010-05-11 01:09:59 :: administrator -> simone ::
2011-12-19 13:46:19 :: simone -> administrator ::
2020-04-28 17:48:58 :: administrator -> simone :: 2009
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
Palavras-Chaveabosrbed layers
commensurate-incommensurate transitions
strained epitaxial layers
numerical simulation
ResumoWe study numerically the phase field crystal model for aborbed layers. This model, introduced recently, is a continuous field crystal lattice in presence of an external pinning potential. The model allows for both elastic and plastic deformations of the layer on atomic and diffusive time scales. Monte Carlo simulations are used to determine the phase diagram as a function of temperature, lattice mismatch and substrate pinning potential. The results show a rich phase diagram with commensurate, incommensurate and liquid-like phases with a topology strongly dependent on the type of ordered structure.
ÁreaFISMAT
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > Ordered structures and...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvoordered structures.pdf
Grupo de Usuáriosadministrator
simone
Visibilidadeshown
Política de Arquivamentodenypublisher denyfinaldraft
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Repositório Espelhosid.inpe.br/mtc-m18@80/2008/03.17.15.17.24
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
Acervo Hospedeirosid.inpe.br/mtc-m18@80/2008/03.17.15.17
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyholder copyright creatorhistory descriptionlevel dissemination doi e-mailaddress electronicmailaddress format isbn label lineage mark nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url
7. Controle da descrição
e-Mail (login)simone
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16c.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador8JMKD3MGP8W/34DNGKP
Repositóriosid.inpe.br/mtc-m18@80/2008/12.18.13.35   (acesso restrito)
Última Atualização2009:12.14.18.20.44 (UTC) administrator
Repositório de Metadadossid.inpe.br/mtc-m18@80/2008/12.18.13.35.34
Última Atualização dos Metadados2018:06.04.03.56.02 (UTC) administrator
Chave SecundáriaINPE--PRE/
DOI10.1016/j.matdes.2008.09.041
ISSN0261-3069
Chave de CitaçãoSouzaNonRibMacSil:2009:CuFoTu
TítuloCutting forces in turning of gray cast iron using silicon nitride based cutting tool
Ano2009
MêsAug.
Data de Acesso26 abr. 2024
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho375 KiB
2. Contextualização
Autor1 Souza, J. Vitor C.
2 Nono, Maria do Carmo Andrade
3 Ribeiro, M. V.
4 Machado, João Paulo Barros
5 Silva, O. M. M.
Grupo1 LAS-CTE-INPE-MCT-BR
2 LAS-CTE-INPE-MCT-BR
3
4 LAS-CTE-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2 Instituto Nacional de Pesquisas Espaciais (INPE)
3 FEG-UNESP
4 Instituto Nacional de Pesquisas Espaciais (INPE)
5 CTA-IAE/AMR
RevistaMaterials & Design
Volume30
Número7
Páginas2715-2720
Histórico (UTC)2010-04-23 17:16:48 :: simone -> administrator ::
2018-06-04 03:56:02 :: administrator -> marciana :: 2009
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
ResumoThis paper presents the results of an experimental investigation about the effect of cutting forces on gray cast iron turning using silicon nitride (Si3N4) based ceramic tool. Turning experiments were carried out at five different cutting speeds and feed rates while depth of cut was kept constant. Tool performance was evaluated with respect to tool wear, temperature, surface finish produced and cutting forces generated during turning. The Si3N4 based ceramic cutting tool showed high performance when increasing cutting speed. These results can be associated with good high-temperature strength of the cutting tool and the presence of graphite flakes in gray cast iron, that lower the friction coefficient between the cutting tool/workpiece.
ÁreaFISMAT
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > Cutting forces in...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvocutting forces.pdf
Grupo de Usuáriosadministrator
simone
Visibilidadeshown
Política de Arquivamentodenypublisher denyfinaldraft24
Permissão de Leituradeny from all and allow from 150.163
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
Acervo Hospedeirosid.inpe.br/mtc-m18@80/2008/03.17.15.17
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyholder copyright creatorhistory descriptionlevel dissemination documentstage e-mailaddress electronicmailaddress format isbn keywords label lineage mark mirrorrepository nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup resumeid rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url versiontype
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16c.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador8JMKD3MGP8W/35N84AL
Repositóriosid.inpe.br/mtc-m18@80/2009/07.24.15.57   (acesso restrito)
Última Atualização2015:03.31.19.09.53 (UTC) administrator
Repositório de Metadadossid.inpe.br/mtc-m18@80/2009/07.24.15.57.14
Última Atualização dos Metadados2020:04.28.17.48.52 (UTC) administrator
Chave SecundáriaINPE--PRE/
DOI10.1016/j.wear.2008.11.033
ISSN0043-1648
Chave de CitaçãoStatutiRadiSantTrav:2009:TrStHy
TítuloA tribological study of the hybrid lubrication of DLC films with oil and water
Ano2009
MêsJune
Data de Acesso26 abr. 2024
Tipo de Trabalhojournal article
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho1337 KiB
2. Contextualização
Autor1 Statuti, Romina Paula de Castro Costa
2 Radi, P. A.
3 Santos, L. V.
4 Trava-Airoldi, Vladimir Jesus
Grupo1 LAS-CTE-INPE-MCT-BR
2
3
4 LAS-CTE-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2 Instituto Tecnológico de Aeronáutica (ITA)
3 Instituto Tecnológico de Aeronáutica (ITA)
4 Instituto Nacional de Pesquisas Espaciais (INPE)
Endereço de e-Mail do Autor1 romina@las.inpe.br
2
3
4 vladimir@las.inpe.br
RevistaWear
Volume267
Número5-8
Páginas1208-1213
Nota SecundáriaA1_ENGENHARIAS_II A2_ENGENHARIAS_III A2_INTERDISCIPLINAR
Histórico (UTC)2009-08-04 13:16:46 :: marciana -> administrator ::
2020-04-28 17:48:52 :: administrator -> simone :: 2009
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
Palavras-ChaveAdhesion
DLC
Friction
Hybrid lubrication
Tribology
Wear
ResumoThis paper reports on the results of a tribological study that compared the friction coefficient and wear volume of titanium alloy (Ti6Al4V) and 316L stainless steel samples, with and without DLC films, in contact with humidity, water and oils. Distilled water (DW), and synthetic motor oil (SO) were applied to some of the sample surfaces, while others were left uncoated or coated only with DLC. The DLC films were grown by using a Pulsed DC Plasma Enhanced Chemical Vapor Deposition (PE-CVD) technique. The friction coefficient and wear volume of various sample pairs were studied as a function of applied load with constant sliding speed, using sphere-on-flat configuration in the reciprocating mode. The sphere wear was measured using a very small pin approach, in agreement with the ASTM G99 norm. Also, the film's atomic arrangements and graphitization level before and after tribotests were analyzed by Raman scattering spectroscopy. Tribotests showed that the friction coefficient and the wear depend on boundary lubrication, suggesting that the chemistry of the fluid lubricant is an important parameter to be considered. Results showed that the lowest friction coefficient and no wear were obtained to DLC/DLC pair in contact with synthetic oil. The most significant aspect of our work is that with just one friction surface with DLC film it is possible to obtain a 56% reduction in the friction coefficients and no measurable wear, resulting in a 50% reduction in production cost.
ÁreaFISMAT
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > A tribological study...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvostatuti_tribological.pdf
Grupo de Usuáriosadministrator
marciana
Grupo de Leitoresadministrator
marciana
Visibilidadeshown
Política de Arquivamentodenypublisher denyfinaldraft24
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Repositório Espelhosid.inpe.br/mtc-m18@80/2008/03.17.15.17.24
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
Lista de Itens Citandosid.inpe.br/bibdigital/2013/09.24.19.30 1
Acervo Hospedeirosid.inpe.br/mtc-m18@80/2008/03.17.15.17
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyholder copyright creatorhistory descriptionlevel dissemination e-mailaddress format isbn label lineage mark nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress project resumeid rightsholder schedulinginformation secondarydate session shorttitle sponsor subject tertiarymark tertiarytype url
7. Controle da descrição
e-Mail (login)simone
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16c.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador8JMKD3MGP8W/35HLSK8
Repositóriosid.inpe.br/mtc-m18@80/2009/06.26.19.58   (acesso restrito)
Última Atualização2015:01.16.17.33.32 (UTC) administrator
Repositório de Metadadossid.inpe.br/mtc-m18@80/2009/06.26.19.58.31
Última Atualização dos Metadados2020:04.28.17.48.43 (UTC) administrator
Chave SecundáriaINPE--PRE/
DOI10.1166/jnn.2009.NS85
ISSN1533-4880
Chave de CitaçãoTrava-AiroldiCBFBHRSC:2009:DeHaAd
TítuloDeposition of Hard and Adherent Diamond-Like Carbon Films Inside Steel Tubes Using a Pulsed-DC Discharge
Ano2009
MêsJune
Data de Acesso26 abr. 2024
Tipo SecundárioPRE PI
Número de Arquivos1
Tamanho655 KiB
2. Contextualização
Autor1 Trava-Airoldi, Vladimir Jesus
2 Capote, Gil
3 Bonetti, L. F.
4 Fernandes, J.
5 Blando, E.
6 Hubler, R.
7 Radi, P. A.
8 Santos, Lúcia Vieira
9 Corat, Evaldo José
Grupo1 LAS-CTE-INPE-MCT-BR
2 LAS-CTE-INPE-MCT-BR
3
4
5
6
7
8 LAP-CTE-INPE-MCT-BR
9 LAP-CTE-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2 Instituto Nacional de Pesquisas Espaciais (INPE)
3
4
5
6
7
8 Instituto Nacional de Pesquisas Espaciais (INPE)
9 Instituto Nacional de Pesquisas Espaciais (INPE)
RevistaJournal of Nanoscience and Nanotechnology
Volume9
Número6
Páginas3891-3897
Nota SecundáriaB2_BIOTECNOLOGIA B2_CIÊNCIAS_BIOLÓGICAS_II B2_CIÊNCIAS_BIOLÓGICAS_III A1_ENGENHARIAS_II A1_INTERDISCIPLINAR A2_MATERIAIS B1_MEDICINA_I B1_MEDICINA_II A2_MEDICINA_VETERINÁRIA B2_QUÍMICA
Histórico (UTC)2009-06-26 19:58:55 :: simone -> administrator ::
2020-04-28 17:48:43 :: administrator -> simone :: 2009
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
Palavras-ChaveDiamond-Like Carbon
Plasma-Enhanced Chemical Vapour Deposition
Pulsed-DC Discharge
Inner Surface
Adhesion
ResumoA new, low cost, pulsed-DC plasma-enhanced chemical vapor deposition system that uses a bipolar, pulsed power supply was designed and tested to evaluate its capacity to produce quality diamondlike carbon films on the inner surface of steel tubes. The main focus of the study was to attain films with low friction coefficients, low total stress, a high degree of hardness, and very good adherence to the inner surface of long metallic tubes at a reasonable growth rate. In order to enhance the diamond-like carbon coating adhesion to metallic surfaces, four steps were used: (1) argon ion sputtering; (2) plasma nitriding; (3) a thin amorphous silicon interlayer deposition, using silane as the precursor gas; and (4) diamond-like carbon film deposition using methane atmosphere. This paper presents various test results as functions of the methane gas pressure and of the coaxial metal anode diameter, where the pulsed-DC voltage constant is kept constant. The influence of the coaxial metal anode diameter and of the methane gas pressure is also demonstrated. The results obtained showed the possibilities of using these DLC coatings for reduced friction and to harden inner surface of the steel tubes.
ÁreaFISMAT
Arranjo 1urlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > Deposition of Hard...
Arranjo 2urlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAP > Deposition of Hard...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo AlvoComut 566431.pdf
Grupo de Usuáriosadministrator
marciana
simone
Grupo de Leitoresadministrator
marciana
Visibilidadeshown
Política de Arquivamentodenypublisher denyfinaldraft
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Repositório Espelhosid.inpe.br/mtc-m18@80/2008/03.17.15.17.24
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
8JMKD3MGPCW/3ET2RFS
Lista de Itens Citandosid.inpe.br/bibdigital/2013/09.25.21.49 2
sid.inpe.br/bibdigital/2013/09.24.19.30 1
Acervo Hospedeirosid.inpe.br/mtc-m18@80/2008/03.17.15.17
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyholder copyright creatorhistory descriptionlevel dissemination e-mailaddress electronicmailaddress format isbn label lineage mark nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress project resumeid rightsholder schedulinginformation secondarydate session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url
7. Controle da descrição
e-Mail (login)simone
atualizar