Resultado da Pesquisa
A expressão de busca foi <secondaryty pn and firstg lap and y 2004 and (dissemination websci or dissemination portalcapes)>.
9 referências encontradas buscando em 17 dentre 17 Arquivos.
Data e hora local de busca: 26/04/2024 22:29.
1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16c.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZ3P8SECKy/EsQKS
Repositóriosid.inpe.br/jeferson/2004/12.14.15.47   (acesso restrito)
Última Atualização2018:04.13.19.09.23 (UTC) marciana
Repositório de Metadadossid.inpe.br/jeferson/2004/12.14.15.47.54
Última Atualização dos Metadados2018:06.04.04.12.58 (UTC) administrator
Chave SecundáriaINPE--PRE/
ISSN1422-6375
Rótuloself-archiving-INPE-MCTIC-GOV-BR
Chave de CitaçãoBarbieriSiUeOtUrNeMa:2004:ImIoIm
TítuloSurface Modification of Ti6AI4v alloy two process: Immersion Ion Implantation and Plasma Jet
Ano2004
Data de Acesso26 abr. 2024
Tipo SecundárioPRE PN
Número de Arquivos1
Tamanho367 KiB
2. Contextualização
Autor1 Barbieri, F. C.
2 Silva, M. M.
3 Ueda, Mario
4 Otani, C.
5 Urruchi, C. W. I.
6 Neto, M.
7 Maciel, H. S.
Grupo1 LAP-INPE-MCT-BR
Endereço de e-Mailueda@plasma.inpe.br
RevistaJournal of Metastable and Nanocrystalline Materials
Volume20-21
Páginas213-218
Histórico (UTC)2004-12-14 17:47:56 :: Michelle -> marciana ::
2004-12-16 13:44:19 :: marciana -> administrator ::
2007-05-15 12:44:03 :: administrator -> marciana ::
2008-05-02 16:20:27 :: marciana -> administrator ::
2013-10-21 17:39:30 :: administrator -> marciana :: 2004
2018-04-13 19:09:23 :: marciana -> administrator :: 2004
2018-06-04 04:12:58 :: administrator -> marciana :: 2004
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
Palavras-ChaveHaemocompatibility
Ion Implantation
Ion Nitriding
Plasma Jet
Ti6AI4V alloy
ResumoThe present work was aimed to study the improvement of mechanical characteristics of the Ti6Al4V alloy surface, induced by ion nitriding process. The increase of hardness and other improvements of the Ti6Al4V alloy surface allow wider applicability of this material in several industrial areas, in particular, biocompatibility applications. One of the used processes was Plasma Immersion Ion Implantation (PIII), where the three-dimensional samples can be homogeneously treated. In such technique, the target is surrounded by the plasma and the pulse biased to high negative voltage. Another technique studied in this article was the process of nitrogen plasma jet. In this case, a reactor of low lasma density is the source of an expansion gas through a constriction hole that separates the source chamber from the vacuum chamber., where teh nitriding is processed. Physical and chemical characterizations of nitrided samples were carried out to formulate the correlations between superficial characteristics of the material and of the parameters of the ion nitriding process.
ÁreaFISPLASMA
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAP > Surface Modification of...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvobarbieri_surface.pdf
Grupo de UsuáriosMichelle
administrator
marciana
Visibilidadeshown
Política de Arquivamentodenypublisher allowfinaldraft
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ET2RFS
DivulgaçãoWEBSCI
Acervo Hospedeirosid.inpe.br/mtc-m18@80/2008/03.17.15.17
6. Notas
Campos Vaziosaffiliation alternatejournal archivist callnumber copyholder copyright creatorhistory descriptionlevel doi electronicmailaddress format isbn lineage mark mirrorrepository month nextedition notes number orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup resumeid rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16c.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZ3P8SECKy/EsRci
Repositóriosid.inpe.br/jeferson/2004/12.14.16.05   (acesso restrito)
Última Atualização2013:05.02.19.36.38 (UTC) administrator
Repositório de Metadadossid.inpe.br/jeferson/2004/12.14.16.05.31
Última Atualização dos Metadados2018:06.04.04.12.58 (UTC) administrator
Chave SecundáriaINPE--PRE/
DOI10.1590/S0103-97332004000800013
ISSN0103-9733
Chave de CitaçãoBarrosoLeit:2004:SiLoPr
TítuloThe sinusoid as the longitudinal profile in backward-wave oscillators of large cross sectional area
Ano2004
MêsDec.
Data de Acesso26 abr. 2024
Tipo SecundárioPRE PN
Número de Arquivos1
Tamanho552 KiB
2. Contextualização
Autor1 Barroso, Joaquim José
2 Leite Neto, Joaquim Paulino
Grupo1 LAP-INPE-MCT-BR
2 LAP-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais (INPE)
2 Instituto Nacional de Pesquisas Espaciais (INPE)
Endereço de e-Mail do Autor1 barroso@plasma.inpe.br
2 leite@plasma.inpe.br
Endereço de e-Mailleite@plasma.inpe.br
RevistaBrazilian Journal of Physics
Volume34
Número4B
Páginas1577-1582
Histórico (UTC)2004-12-14 18:05:32 :: Michelle -> marciana ::
2005-06-28 11:33:43 :: marciana -> administrator ::
2006-09-27 21:01:16 :: administrator -> marciana ::
2008-05-02 16:20:27 :: marciana -> administrator ::
2013-03-20 18:44:22 :: administrator -> marciana :: 2004
2013-05-02 19:36:38 :: marciana -> administrator :: 2004
2018-06-04 04:12:58 :: administrator -> marciana :: 2004
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
Palavras-Chaveestrutura periódica corrugada
método de Rayleigh-Fourier
backward-wave oscillators (BWO)
Rayleigh-Fourier method
ResumoThis work reports on design tools for BWOs operating in symmetric TM modes since these modes are able to perturb the axial velocity and electron density density on rectilinear beams confined by an external magnetic field in slowwave systems. Here we investigate whether a cylindrical guide with sinusoidally rippled wall can provide strong coupling between the guide surface waves and mildly relativistic (500-keV) electron beams in the 8-9 GHz frequency range for BWOs of large diameter (D ~ 3 lambda). For this purpose, the characteristic equation of a sinusoidally corrugated structure is derived on the basis of the Rayleigh-Fourier method, whereby the field solution is represented by a single expansion of TM eigenmodes. From the dispersion diagrams thus obtained we infer the appropriate periodic length and ripple amplitude of the guiding structure that optimize the beam-wave interaction.
ÁreaFISPLASMA
ArranjoThe sinusoid as...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvoa13v344b.pdf
Grupo de UsuáriosMichelle
administrator
marciana
Grupo de Leitoresadministrator
marciana
Visibilidadeshown
Licença de Direitos Autoraisurlib.net/www/2012/11.12.15.10
Política de Arquivamentodenypublisher denyfinaldraft12
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ET2RFS
Lista de Itens Citandosid.inpe.br/bibdigital/2013/09.25.21.49 1
DivulgaçãoWEBSCI; PORTALCAPES; SCIELO.
Acervo Hospedeirosid.inpe.br/mtc-m18@80/2008/03.17.15.17
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyholder creatorhistory descriptionlevel format isbn label lineage mark mirrorrepository nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress project resumeid rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZsFDuKxG/GAwvC
Repositóriosid.inpe.br/marciana/2005/06.28.11.58   (acesso restrito)
Última Atualização2005:06.28.03.00.00 (UTC) administrator
Repositório de Metadadossid.inpe.br/marciana/2005/06.28.11.58.28
Última Atualização dos Metadados2018:06.05.01.21.34 (UTC) administrator
Chave SecundáriaINPE-12813-PRE/8103
ISSN0103-9733
Chave de CitaçãoBarrosoTerr:2004:BeTrQu
TítuloBeam transport in a quadrupole electrostatic system
ProjetoPesquisa e Construção de Canhões Injetores de Elétrons
Ano2004
MêsDec.
Data de Acesso26 abr. 2024
Tipo SecundárioPRE PN
Número de Arquivos1
Tamanho573 KiB
2. Contextualização
Autor1 Barroso, Joaquim José de
2 Terra, M. O.
Grupo1 LAP-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais, Laboratorio Associado de Plasma (INPE, LAP)
2 Instituto Tecnológico de Aeronáutica (ITA)
RevistaBrazilian Journal of Physics
Volume34
Número4b
Páginas1598-1601 DEC 2004
Histórico (UTC)2005-07-13 19:00:20 :: sergio -> administrator ::
2006-09-28 22:28:55 :: administrator -> sergio ::
2008-01-07 12:54:02 :: sergio -> marciana ::
2008-01-15 15:57:37 :: marciana -> administrator ::
2008-06-10 22:29:06 :: administrator -> marciana ::
2011-05-25 12:17:07 :: marciana -> administrator ::
2018-06-05 01:21:34 :: administrator -> marciana :: 2004
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Palavras-ChavePLASMA
Plasma filled diode
Pierce diode
Chaos
Quadrupole electrostatic system
PLASMA
Sistema eletrostático quadripolo
ResumoElectron beam transport through a quadrupole electrostatic system is investigated by particle-in-cell simulation in the present work, where - at the advantage of easier experimental implementation - the analogous parabolic electrostatic potential replaces the usual neutralizing ion background of bounded plasma systems. Looking at the maximum transported current and the dynamical behavior dependence on the electron beam injection energy, we have found that for a partial neutralizing electrostatic potential (i) the transmitted current significantly increases in relation to other electrostatic devices, due mainly to two-dimensional effects, (ii) the occurrence of stable static solutions with the typical profile of unstable static solutions of the classical Pierce diode, and (iii) a new bifurcation sequence of the steady-state solutions, at which periodic virtual cathode oscillations turn into intermittent spiking oscillations, which ultimately evolve to stable oscillations when increasing the input energy of the injected electron beam.
ÁreaFISPLASMA
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvobeam transport.pdf
Grupo de Usuáriosadministrator
marciana
sergio
Visibilidadeshown
Detentor da CópiaSID/SCD
Política de Arquivamentodenypublisher denyfinaldraft12
Permissão de Leituradeny from all and allow from 150.163
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ET2RFS
DivulgaçãoWEBSCI; PORTALCAPES; SCIELO.
Acervo Hospedeirosid.inpe.br/banon/2003/08.15.17.40
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyright creatorhistory descriptionlevel documentstage doi e-mailaddress electronicmailaddress format isbn label lineage mark mirrorrepository nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress readergroup resumeid rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url versiontype
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZsFDuKxG/GAvPx
Repositóriosid.inpe.br/marciana/2005/06.28.11.27   (acesso restrito)
Última Atualização2005:06.28.03.00.00 (UTC) administrator
Repositório de Metadadossid.inpe.br/marciana/2005/06.28.11.27.08
Última Atualização dos Metadados2018:06.05.01.21.34 (UTC) administrator
Chave SecundáriaINPE-12812-PRE/8102
ISSN0103-9733
Chave de CitaçãoBerniDelBOlivAlon:2004:StPr
TítuloThomson scattering diagnostic on the ETE tokamak: Status and progress
ProjetoExperimento Tokamak Esférico (ETE)
Ano2004
MêsDec.
Data de Acesso26 abr. 2024
Tipo SecundárioPRE PN
Número de Arquivos1
Tamanho1471 KiB
2. Contextualização
Autor1 Berni, Luis Angelo
2 Del Bosco, Edson
3 Oliveira, Rogerio de Moraes
4 Alonso, M. P.
Identificador de Curriculo1
2 8JMKD3MGP5W/3C9JGUF
3 8JMKD3MGP5W/3C9JJ6L
Grupo1 LAP-INPE-MCT-BR
2 LAP-INPE-MCT-BR
3 LAP-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais, Laboratorio Associado de Plasma (INPE. LAP)
2 Instituto Nacional de Pesquisas Espaciais, Laboratorio Associado de Plasma (INPE. LAP)
3 Instituto Nacional de Pesquisas Espaciais, Laboratorio Associado de Plasma (INPE. LAP)
4 Associação EURATOM/IST
RevistaBrazilian Journal of Physics
Volume34
Número4b
Páginas1572-1576
Histórico (UTC)2005-06-28 11:37:27 :: sergio -> administrator ::
2006-09-28 22:28:54 :: administrator -> sergio ::
2008-01-07 12:54:02 :: sergio -> marciana ::
2008-01-17 14:14:16 :: marciana -> administrator ::
2012-11-05 15:10:57 :: administrator -> marciana :: 2004
2012-11-05 15:22:36 :: marciana -> administrator :: 2004
2018-06-05 01:21:34 :: administrator -> marciana :: 2004
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Tipo de Versãopublisher
Palavras-ChaveMETEOROLOGY
Thomson scaterring
Tokamak ETE
METEOROLOGIA
Espalhamento de Thomson
Experimento Tokamak Esférico (ETE)
ResumoIn order to measure the plasma temperature and density in the spherical tokamak ETE, a one-channel Thomson scattering system was implemented. During the upgrade of capacitor banks and optimization since the beginning of operation, the plasma pulse duration has increased from 1.5 ms up to 12 ms with plasma currents varying from 10 kA to 60 kA. During this phase, the electron temperature was increased from 20 eV to 160 eV with densities as high as 3.5 x 10(19) m(-3). Presently, the Thomson scattering diagnostic is being upgraded based on the time-delay technique, that consists in using fibers of different lengths to transmit the scattered light signals to the same polychromator. This system will allow measurements of electron temperature and density profiles with ten spatial points per laser shot and per polychromator. This work describes in details the Thomson scattering system, presents a selection of results obtained by this system since the initial phase of operation, and shows details of the proposed upgrade of the Thomson scattering system.
ÁreaFISPLASMA
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAP > Thomson scattering diagnostic...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvothomson scattering.pdf
Grupo de Usuáriosadministrator
marciana
sergio
Grupo de Leitoresadministrator
marciana
Visibilidadeshown
Detentor da CópiaSID/SCD
Política de Arquivamentodenypublisher denyfinaldraft12
Permissão de Leituradeny from all and allow from 150.163
Permissão de Atualizaçãonão transferida
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ET2RFS
Lista de Itens Citandosid.inpe.br/mtc-m21/2012/07.13.14.59.24 2
sid.inpe.br/bibdigital/2013/09.25.21.49 1
sid.inpe.br/mtc-m21/2012/07.13.14.44.55 1
DivulgaçãoWEBSCI; PORTALCAPES; SCIELO.
Acervo Hospedeirosid.inpe.br/banon/2003/08.15.17.40
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyright creatorhistory descriptionlevel doi e-mailaddress electronicmailaddress format isbn label lineage mark mirrorrepository nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZsFDuKxG/GBcf6
Repositóriosid.inpe.br/marciana/2005/06.29.14.16   (acesso restrito)
Última Atualização2005:06.29.03.00.00 (UTC) administrator
Repositório de Metadadossid.inpe.br/marciana/2005/06.29.14.16.12
Última Atualização dos Metadados2018:06.05.01.21.35 (UTC) administrator
Chave SecundáriaINPE-12814-PRE/8104
ISSN0103-9733
Chave de CitaçãoGomesUedReuBel:2004:ChReIm
TítuloChromium recoil implantation into SAE 1020 steel by nitrogen ion bombardment
ProjetoImplantação Iônica por Imersão em Plasma (IIIP)
Ano2004
MêsDec.
Data de Acesso26 abr. 2024
Tipo SecundárioPRE PN
Número de Arquivos1
Tamanho116 KiB
2. Contextualização
Autor1 Gomes, Geraldo Francisco
2 Ueda, Mário
3 Reuther, H.
4 Richter E
5 Beloto, Antonio Fernando
Identificador de Curriculo1 8JMKD3MGP5W/3C9JH5D
2 8JMKD3MGP5W/3C9JHSB
3
4
5 8JMKD3MGP5W/3C9JGJ8
Grupo1 LAP-INPE-MCT-BR
2 LAS-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais, Laboratorio Associado de Plasma (INPE. LAP)
2 Instituto Nacional de Pesquisas Espaciais, Laboratorio Associado de Plasma (INPE. LAP)
3 Forschungszentrum Rosendorf (FZR)
4 Forschungszentrum Rosendorf (FZR)
5 Instituto Nacional de Pesquisas Espaciais, Laboratorio Associado de Sensores e Materiais (INPE. LAS)
RevistaBrazilian Journal of Physics
Volume34
Número4b
Páginas1629-1631
Histórico (UTC)2006-01-23 16:56:41 :: sergio -> administrator ::
2006-09-28 22:28:55 :: administrator -> sergio ::
2008-01-07 12:54:02 :: sergio -> marciana ::
2008-03-27 16:38:55 :: marciana -> administrator ::
2008-06-10 22:29:07 :: administrator -> marciana ::
2011-05-25 12:21:36 :: marciana -> administrator ::
2018-06-05 01:21:35 :: administrator -> marciana :: 2004
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Palavras-ChavePLASMA
Corrosion
SAE 1020
Chromium
Plasma immersion ion implantation
PLASMA
Corrosão
Cromo
Implantação iônica por imersão em plasma
ResumoSAE 1020 is a widely used plain carbon steel, as mortar reinforcement in buildings and small machine parts. But aside from good mechanical properties, its surface suffer from severe corrosion and high wear rate, due to modest hardness. Chromium (Cr) in excess of 12% in Fe alloys renders them resistant to several corrosive attacks. So we tried to introduce Cr in such amounts into the surface of that steel. Cr films were deposited by electron beam on SAE 1020 steel. Bombarding the Cr film either by nitrogen Plasma Immersion Ion Implantation (PIII) or nitrogen ion beam (IB), Cr atoms were recoil introduced into the Fe matrix. Normally, in the recoil process, heavy atoms are used, but in this set of experiments we used a relatively lighter atom, viz. nitrogen. SRIM simulation was used to show Cr atoms range in the steel matrix after being hit by nitrogen atoms. AES analysis showed ranges far beyond the calculated figures and in percentages above 13at. %, enough to the purposes of these works. Preliminary corrosion results showed remarkable enhancement under corrosive attack.
ÁreaFISMAT
Arranjo 1urlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > Chromium recoil implantation...
Arranjo 2urlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAP > Chromium recoil implantation...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvochromium.pdf
Grupo de Usuáriosadministrator
marciana
sergio
Visibilidadeshown
Detentor da CópiaSID/SCD
Política de Arquivamentodenypublisher denyfinaldraft12
Permissão de Leituradeny from all and allow from 150.163
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
8JMKD3MGPCW/3ET2RFS
DivulgaçãoWEBSCI; PORTALCAPES; SCIELO.
Acervo Hospedeirosid.inpe.br/banon/2003/08.15.17.40
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyright creatorhistory descriptionlevel documentstage doi e-mailaddress electronicmailaddress format isbn label lineage mark mirrorrepository nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress readergroup rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url versiontype
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZ3r59YDa/Gt3Ch
Repositóriosid.inpe.br/iris@1916/2005/06.15.12.44   (acesso restrito)
Última Atualização2005:06.15.03.00.00 (UTC) administrator
Repositório de Metadadossid.inpe.br/iris@1916/2005/06.15.12.44.09
Última Atualização dos Metadados2018:06.05.01.20.21 (UTC) administrator
Chave SecundáriaINPE-12560-PRE/7857
ISSN0103-9733
Chave de CitaçãoMarcondesUeKoBeLeGoLe:2004:ImUlMo
TítuloImprovements of ultra-high molecular weight polyethylene mechanical properties by nitrogen plasma immersion ion implantation
ProjetoImplantação Iônica por Imersão em Plasma (IIIP) / Implantação com íons de alta energia
Ano2004
MêsDec.
Data de Acesso26 abr. 2024
Tipo SecundárioPRE PN
Número de Arquivos1
Tamanho151 KiB
2. Contextualização
Autor1 Marcondes, André Ricardo
2 Ueda, Mário
3 Kostov, K. G.
4 Beloto, Antonio Fernando
5 Leite, Nélia Ferreira
6 Gomes, Geraldo Francisco
7 Lepienski, C. M.
Identificador de Curriculo1 8JMKD3MGP5W/3C9JGHM
2 8JMKD3MGP5W/3C9JHSB
3
4 8JMKD3MGP5W/3C9JGJ8
5 8JMKD3MGP5W/3C9JHU5
6 8JMKD3MGP5W/3C9JH5D
Grupo1 LAP-INPE-MCT-BR
2 LAP-INPE-MCT-BR
3 LAP-INPE-MCT-BR
4 LAS-INPE-MCT-BR
5 LAS-INPE-MCT-BR
6 LAP-INPE-MCT-BR
Afiliação1 Instituto de Pesquisas Espaciais, Laboratorio Associado Plasma (INPE.LAP)
2 Instituto de Pesquisas Espaciais, Laboratorio Associado Plasma (INPE.LAP)
3 Instituto de Pesquisas Espaciais, Laboratorio Associado Plasma (INPE.LAP)
4 Instituto de Pesquisas Espaciais, Laboratorio Associado de Sensores e Materiais (INPE.LAS)
5 Instituto de Pesquisas Espaciais, Laboratorio Associado de Sensores e Materiais (INPE.LAS)
6 Instituto de Pesquisas Espaciais, Laboratorio Associado de Plasma (INPE.LAP)
7 Universidade Federal do Paraná. Setor de Ciências Exatas (UFPR)
RevistaBrazilian Journal of Physics
Volume34
Número4b
Páginas1667-1672
Histórico (UTC)2005-06-16 17:34:32 :: sergio -> administrator ::
2006-09-28 22:27:33 :: administrator -> sergio ::
2008-01-07 12:52:49 :: sergio -> marciana ::
2008-02-20 12:07:45 :: marciana -> administrator ::
2008-06-10 22:25:01 :: administrator -> marciana ::
2011-05-29 23:53:33 :: marciana -> administrator ::
2012-10-22 05:48:00 :: administrator -> marciana :: 2004
2012-10-22 11:37:19 :: marciana -> marcelo.pazos@sid.inpe.br :: 2004
2012-10-22 11:38:25 :: marcelo.pazos@sid.inpe.br -> administrator :: 2004
2018-06-05 01:20:21 :: administrator -> marciana :: 2004
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Palavras-ChavePLASMA
Plasma Immersion Ion Implantation
Ultra High Molecular Weight Polyethylene
Diamond Like Carbon
Amorphous-carbon films
Surface modification
XPS
PLASMA
Implantação Iônica por Imersão em Plasma
Polietileno com peso molecular alto
DLC
Filmes de carbono
Modificação da superfície
ResumoNitrogen Plasma Immersion Ion Implantation (PIII) has been used to modify the surface chemical structure of Ultra High Molecular Weight Polyethylene (UHMWPE). Grinding and polishing processes based on abrasive papers and alumina pastes have been evaluated with regard to their results on the improvement of polymer surface roughness, which has shown-to be of crucial importance for hardness characterization. Raman spectroscopy, XPS, and Nanoindentation tests were used to characterize the modified surfaces. Experimental results has shown that UHMWPE surface mechanical properties such as hardness and elastic modulus can be improved by induced chain cross-linking between the macromolecules on the polymer surface caused by nitrogen PIII. The new material formed on the surface is Diamond Like Carbon (DLC). As a significant improvement in hardness was obtained. by DLC synthesis on. the treated surface, it is expected a dramatic improvement of abrasion resistance and overall durability of prostheses made with PIII treated UHMWPE.
ÁreaETES
Arranjo 1urlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAS > Improvements of ultra-high...
Arranjo 2urlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAP > Improvements of ultra-high...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvoimprovements.pdf
Grupo de Usuáriosadministrator
marciana
sergio
Visibilidadeshown
Detentor da CópiaSID/SCD
Política de Arquivamentodenypublisher denyfinaldraft12
Permissão de Leituradeny from all and allow from 150.163
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ESR3H2
8JMKD3MGPCW/3ET2RFS
DivulgaçãoWEBSCI; PORTALCAPES; SCIELO.
Acervo Hospedeirosid.inpe.br/banon/2003/08.15.17.40
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyright creatorhistory descriptionlevel documentstage doi e-mailaddress electronicmailaddress format isbn label lineage mark mirrorrepository nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress readergroup rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url versiontype
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZsFDuKxG/GBgfR
Repositóriosid.inpe.br/marciana/2005/06.29.17.24   (acesso restrito)
Última Atualização2005:06.29.03.00.00 (UTC) administrator
Repositório de Metadadossid.inpe.br/marciana/2005/06.29.17.24.55
Última Atualização dos Metadados2018:06.05.01.21.35 (UTC) administrator
Chave SecundáriaINPE-12816-PRE/8106
ISSN0103-9733
Chave de CitaçãoOliveiraUedaBern:2004:FiReFa
TítuloFirst results on the fast neutral lithium beam diagnostics probing the edge plasma of the ETE tokamak
ProjetoDesenvolvimento de diagnósticos de feixe neutro de lítio e aplicações em dispositivos a serem utilizados em fusão
Ano2004
MêsDec.
Data de Acesso26 abr. 2024
Tipo SecundárioPRE PN
Número de Arquivos1
Tamanho443 KiB
2. Contextualização
Autor1 Oliveira, Rogerio Moraes
2 Ueda, Mário
3 Berni, Luis Angelo
Identificador de Curriculo1
2 8JMKD3MGP5W/3C9JHSB
Grupo1 LAP-INPE-MCT-BR
2 LAP-INPE-MCT-BR
3 LAP-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais, Laboratorio Associado de Plasma (INPE. LAP)
2 Instituto Nacional de Pesquisas Espaciais, Laboratorio Associado de Plasma (INPE. LAP)
3 Instituto Nacional de Pesquisas Espaciais, Laboratorio Associado de Plasma (INPE. LAP)
RevistaBrazilian Journal of Physics
Volume34
Número4B
Páginas1655-1661
Histórico (UTC)2005-06-29 17:24:56 :: sergio -> administrator ::
2006-09-28 22:28:57 :: administrator -> sergio ::
2008-01-07 12:54:02 :: sergio -> marciana ::
2008-01-14 16:06:40 :: marciana -> administrator ::
2008-06-10 22:29:13 :: administrator -> marciana ::
2011-05-20 05:39:48 :: marciana -> administrator ::
2018-06-05 01:21:35 :: administrator -> marciana :: 2004
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Palavras-ChavePLASMA
Emission properties
Density
System
Neutral lithium
ETE
PLASMA
Propriedades de Emissão
Densidade
Sistema
Lítio neutro
ResumoOne of the main objectives of the research program at ETE is devoted to the study of confinement properties in a low aspect ratio tokamak plasma configuration, and to attain this purpose the determination of plasma parameters of the edge region plays an essential role. A Fast Neutral Lithium Beam (FNLB) diagnostics was developed to perform the measurement of the density profile and its fluctuations at the edge of the plasma in ETE. The first light signals were collected after the filling of ETE chamber with He gas (10(-4) Torr), where the optimization of this diagnostics was done, to adjust the better point for focalization of the beam and for the optical detection system setup. An extensive study of the variation of the intensity of the light signal with the variation of the gas pressure was carried out. This calibration will be used during shots in ETE to measure the rapidly varying pressure of the pulsed discharge by FNLB technique, a requirement imposed by the use of puff valves for injection of the gas. This paper will also describe the several phases of the development of this diagnostics, discuss the problems occurred and the adopted solutions and show the first measurements of the probing of the edge plasma of ETE with FNLB..
ÁreaFISPLASMA
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAP > First results on...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvofirst results.pdf
Grupo de Usuáriosadministrator
marciana
sergio
Visibilidadeshown
Detentor da CópiaSID/SCD
Política de Arquivamentodenypublisher denyfinaldraft12
Permissão de Leituradeny from all and allow from 150.163
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ET2RFS
DivulgaçãoWEBSCI; PORTALCAPES; SCIELO.
Acervo Hospedeirosid.inpe.br/banon/2003/08.15.17.40
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyright creatorhistory descriptionlevel documentstage doi e-mailaddress electronicmailaddress format isbn label lineage mark mirrorrepository nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress readergroup rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url versiontype
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZsFDuKxG/GAvyN
Repositóriosid.inpe.br/marciana/2005/06.28.11.14   (acesso restrito)
Última Atualização2005:06.28.03.00.00 (UTC) administrator
Repositório de Metadadossid.inpe.br/marciana/2005/06.28.11.14.58
Última Atualização dos Metadados2018:06.05.01.21.34 (UTC) administrator
Chave SecundáriaINPE-12811-PRE/8101
ISSN0103-9733
Chave de CitaçãoRossiUedaCast:2004:PuPoMo
TítuloPulsed power modulators for surface treatment by plasma immersion ion implantation
ProjetoImplantação Iônica por Imersão em Plasma (IIIP)
Ano2004
MêsDec.
Data de Acesso26 abr. 2024
Tipo SecundárioPRE PN
Número de Arquivos1
Tamanho259 KiB
2. Contextualização
Autor1 Rossi, José Osvaldo
2 Ueda, Mário
3 Castro, Joaquim José Barroso de
Identificador de Curriculo1 8JMKD3MGP5W/3C9JHJ5
2 8JMKD3MGP5W/3C9JHSB
3 8JMKD3MGP5W/3C9JHFA
Grupo1 LAP-INPE-MCT-BR
2 LAP-INPE-MCT-BR
3 LAP-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais, Laboratorio Associado de Plasma (INPE, LAP)
2 Instituto Nacional de Pesquisas Espaciais, Laboratorio Associado de Plasma (INPE, LAP)
3 Instituto Nacional de Pesquisas Espaciais, Laboratorio Associado de Plasma (INPE, LAP)
RevistaBrazilian Journal of Physics
Volume34
Número4b
Páginas1565-1571
Histórico (UTC)2005-06-28 11:38:39 :: sergio -> administrator ::
2006-09-28 22:28:53 :: administrator -> sergio ::
2008-01-07 12:54:02 :: sergio -> marciana ::
2008-01-14 11:59:35 :: marciana -> administrator ::
2008-06-10 22:29:05 :: administrator -> marciana ::
2011-05-29 16:34:45 :: marciana -> administrator ::
2018-06-05 01:21:34 :: administrator -> marciana :: 2004
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Palavras-ChaveCircuit topologies
PLASMA
Hard-tube pulser
Genaratior
Long
KV
Plasma immersion ion implantation
PLASMA
Gerador
Implantação iônica por imersão a plasma
Topologias de ciruito
ResumoThe treatment of surfaces by plasma immersion ion implantation requires pulsed power modulators to provide negative high voltage pulses. To achieve this requirement, we have developed three basic circuit configurations in our laboratory: pulse forming network (PFN), hard-tube pulser (HT) and Blumlein line. In this paper we discuss these three types of circuit topologies. As experimental results, first we present the voltage/current characteristic waveforms of PFN and HT pulsers in the PIII treatment of different materials (aluminum, silicon and stainless steel) as well we describe the surface characterization of the materials thereof treated.And finally,we show recent high voltage tests of a high voltage Blumlein pulser (150kV/300A/1mus) to be used in surface treatments of polymers and aluminum alloys.
ÁreaFISPLASMA
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAP > Pulsed power modulators...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvopulsed.pdf
Grupo de Usuáriosadministrator
marciana
sergio
Visibilidadeshown
Detentor da CópiaSID/SCD
Política de Arquivamentodenypublisher denyfinaldraft12
Permissão de Leituradeny from all and allow from 150.163
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ET2RFS
DivulgaçãoWEBSCI; PORTALCAPES; SCIELO.
Acervo Hospedeirosid.inpe.br/banon/2003/08.15.17.40
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyright creatorhistory descriptionlevel documentstage doi e-mailaddress electronicmailaddress format isbn label lineage mark mirrorrepository nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress readergroup rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url versiontype
7. Controle da descrição
e-Mail (login)marciana
atualizar 

1. Identificação
Tipo de ReferênciaArtigo em Revista Científica (Journal Article)
Sitemtc-m16.sid.inpe.br
Código do Detentorisadg {BR SPINPE} ibi 8JMKD3MGPCW/3DT298S
Identificador6qtX3pFwXQZsFDuKxG/GBfmm
Repositóriosid.inpe.br/marciana/2005/06.29.16.42   (acesso restrito)
Última Atualização2005:06.29.03.00.00 (UTC) administrator
Repositório de Metadadossid.inpe.br/marciana/2005/06.29.16.42.21
Última Atualização dos Metadados2018:06.05.01.21.35 (UTC) administrator
Chave SecundáriaINPE-12815-PRE/8105
ISSN0103-9733
Chave de CitaçãoUedaGKRLSTS:2004:ReExHy
TítuloResults from experiments on hybrid plasma immersion ion implantation/nitriding processing of materials
Ano2004
MêsDec.
Data de Acesso26 abr. 2024
Tipo SecundárioPRE PN
Número de Arquivos1
Tamanho194 KiB
2. Contextualização
Autor1 Ueda, Mario
2 Gomes, Geraldo Francisco
3 Kostov, K. G.
4 Reuther, H.
5 Lepienski, C. M.
6 Soares, P. C.
7 Takai, O.
8 Silva, M. M.
Identificador de Curriculo1 8JMKD3MGP5W/3C9JHSB
2 8JMKD3MGP5W/3C9JH5D
Grupo1 LAP-INPE-MCT-BR
Afiliação1 Instituto Nacional de Pesquisas Espaciais, Laboratorio Associado de Plasmas(INPE, LAP)
2 Ctr Rossendorf, Inst Ion Beam Phys & Mat Res, Dresden, Germany
3 Univ Fed Parana, Dept Phys, Curitiba, Parana BR-80060000 Brazil
4 Nagoya Univ, Dept Mat Proc Engn, Nagoya, Aichi Japan
5 Technol Inst Aeronaut, Dept Mech Engn, Sao Jose Dos Campos, SP Brazil
RevistaBrazilian Journal of Physics
Volume34
Número4b
Páginas1632-1637
Histórico (UTC)2005-06-29 16:42:22 :: sergio -> administrator ::
2006-09-28 22:28:56 :: administrator -> sergio ::
2008-01-07 12:54:02 :: sergio -> administrator ::
2008-06-10 22:29:12 :: administrator -> marciana ::
2011-05-20 05:39:44 :: marciana -> administrator ::
2018-06-05 01:21:35 :: administrator -> marciana :: 2004
3. Conteúdo e estrutura
É a matriz ou uma cópia?é a matriz
Estágio do Conteúdoconcluido
Transferível1
Tipo do ConteúdoExternal Contribution
Palavras-ChaveTRIBOLOGICAL PROPERTIES
HIGH-PRESSURE
STEEL
METAL
ResumoTo improve the performance of critical part components, new methods for surface strengthening are being developed with success, like plasma immersion ion implantation (PIII) and hybrid surface treatments mixing PIII and ion nitriding processes. A combination of high pressure (4 x 10(1)Pa), moderate temperature (up to 450degreesC) glow discharge nitriding with low pressure (8 x 10(-2)Pa) and low DC bias voltage ion nitriding (or DC PIII) was implemented. Depending on the particular conditions of the treatment and the depth probed, mixed phases of gamma(N) and epsilon were measured in the treated SS304 steel sample. This near surface modification resulted in an improved hardness (up to a factor of 2.7 x) of the sample which could also enhance its wear properties. Surface modification of T16Al4V alloy and SS304 steel by a combination of PIII and subsequent ion nitriding was investigated as well. Nitrogen ions were implanted into the specimens at 15 keV and then ion nitrided at low pressure (7 x 10(-2)Pa) with a bias of -800 V. Compared to the untreated samples, the hardness of Ti6Al4V alloy and the steels could be improved significantly. AES results indicated high retained doses in both samples, confirming the high efficiency of this hybrid process. .
ÁreaFISMAT
Arranjourlib.net > BDMCI > Fonds > Produção anterior à 2021 > LABAP > Results from experiments...
Conteúdo da Pasta docacessar
Conteúdo da Pasta sourcenão têm arquivos
Conteúdo da Pasta agreementnão têm arquivos
4. Condições de acesso e uso
Idiomaen
Arquivo Alvoresults from.pdf
Grupo de Usuáriosadministrator
sergio
Visibilidadeshown
Detentor da CópiaSID/SCD
Política de Arquivamentodenypublisher denyfinaldraft12
Permissão de Leituradeny from all and allow from 150.163
5. Fontes relacionadas
Unidades Imediatamente Superiores8JMKD3MGPCW/3ET2RFS
DivulgaçãoWEBSCI; PORTALCAPES; SCIELO.
Acervo Hospedeirosid.inpe.br/banon/2003/08.15.17.40
6. Notas
Campos Vaziosalternatejournal archivist callnumber copyright creatorhistory descriptionlevel documentstage doi e-mailaddress electronicmailaddress format isbn label lineage mark mirrorrepository nextedition notes orcid parameterlist parentrepositories previousedition previouslowerunit progress project readergroup rightsholder schedulinginformation secondarydate secondarymark session shorttitle sponsor subject tertiarymark tertiarytype typeofwork url versiontype
7. Controle da descrição
e-Mail (login)marciana
atualizar